XTOOL D8 Auto OBD2 Bidirectional Scanner All System Diagnostic CANFD Coding Tool

Description: XTOOL D8 -- ALL IN ONE PROFESSIONAL DIAGNOSTIC SCANNER: ➿Topology Mapping + ADAS Calibration ➿E*CU Coding+ Programmable Module Installation(PMI) ➿ CAN FD Protocol +V.A.G Guide Function + Wide Car Coverage ➿38+ Reset Functions ➿Full Sysytem Diagnostic + Bi-directional Control/Active Test ➿Full OBD2 Diagnosis & 8-in-1 Data Graph & Auto-Vin ➿3-Year Free Software Update & 2-Year Warranty 🚩 Operation System: Android 5.1.1 🚩 Processor: Quad-core 1.8GHz 🚩 RAM+ROM: 2G+64G 🚩 Tablet: 8" touchscreen，1024×768 resolution 🚩 Connection: Wired Only (OBD2 Cable) 🚩 Battery: 10,000 mAh / 3.7V 🚩 8MP Camera XTOOL D8 Auto OBD2 Bidirectional Scanner All System Diagnostic CANFD Coding Tool2024 NEWEST XTOOL D8 ALL IN ONE PROFESSIONAL DIAGNOSTIC TOOL WITH : 💫All System Diagnostic,💫Bi-directional Control(Active Test),💫CANFD,💫E#CU & Configuration,💫E#CU Offline (PMI),💫ADAS Calibration,💫Full OBD2 Functions,💫Auto VIN Scan,💫38+ Reset Functions,💫Topology Mapping,💫Guide Function,💫8-IN-1 Live Data Stream,💫3-years Free Update,💫15+ Languages Support ,💫One-click Update via WIFI ,💫99% Vehicle Coverage ...Top Reasons to Choose XTOOL D8 Scanner:>>All System Diagnostic: Read#clear trouble code,read e#cu information,read live data,read freeze frame for full system(ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System etc.),quickly troubleshooting the vehicle issues>>Advanced E#CU : ✅Personalize vehicles settings,✅disable annoying functions,✅component matching,etc(fit for VW,fit forAudi,fit for Skoda only).>>Bi-directional Control(Active Test): Receive information and send the commands to the system/components to perform active tests like EVAP Test, Fuel Pump, Fuel Injector Test, Cycling A/C Clutch On/Off, Window/Door/Horn/Lock On/Off, EGR Test, etc. >>CAN FD Protocol: XTOOL D8 support CANFD for faster data transfer(fit for GM vehicles after 2020). >>38+ Reset Functions:Cover for complete diagnosis and reset functions in routine maintenance.>>Full OBD2 Functions:Full 10 OBD2 Modes includes read # clear trouble code, live data, read freeze frame, read e#cu information, on-board monitor test, O2 monitor test, i/m readiness etc...>>Topology Mapping: Dive right into the abnormal module or related modules to boost repair efficiency.>>Guide Function:Provide instructions step by step when diagnosis or performing complicated functions like E#CU (fit for VW,fit for Audi,fit for Skoda only).>>Programmable Module Installation(PMI):Copy the original modules and installation to the new unit to finish the module replacement.>>8-in-1 Data Graph: Display 8 data streams (Graphics & Text) at one time, to better help you monitor and analyze the health status of the system.>>Auto VIN: Automatically identify your vehicle information without manually entering the VIN.>>3-Year Free Software Update & 15+ Language>>High-end Configuration: ✔️Android 5,✔️8 " Touch Screen,✔️10000mAh Battery,✔️2G RAM,✔️64G ROM,✔️Wire Connection >>Work With 8+12 Cable Adapter (NOT Included): Support for Chrysler 2018 and later vehicles.>>Work with XV100 ( NOT Included):Inspect hard-to-reach vehicle spots. Advanced E#CU & Configuration & Gudie Function (fit for VW,fit for Audi,fit for Skoda only) & PMI XTOOL D8 E#CU scan tool can perform & configuration, components matching, adaptive data reset and flash hidden functions to enhance vehicle performance and personalize car settings after replacing the E#CU.Recode Replaced Modules: Download data from server and write it to new E#CU after replacing E#CU.Renew E#CUs Coordination: Update the E#CU software to latest version to optimize car performance.Reset Adaptive Data: Reset the adaptive value after repairing or replacing the E#CU.Refresh Hidden Functions: Enable hidden functions or disable infrequently used functions to personalize car settings. Customize the vehicle settingsWith Guided Functions for V-A-G: XTOOL D8 E#CU tool provides O-E level operation guidance for some complex special Functions for V-A-G vehicles to simplify the diagnosis process and shorten the diagnosis time.Programmable Module Installation(PMI) (for Ford ,for Lincoln,for Mazda only)When replacing or initializing a new/used module, XTOOL D8 car diagnostic tool allows data copy of original modules and installation to the new unit to finish the module replacement. Topology Mapping:Dive right into the abnormal module or related modules to boost repair efficiency.Having everything in a view on the communication structure between modules just one click to display all fault codes, executive functions and view live data in graphing directly.Note: Module Topology are not available to all vehicle makes for now(Available for GM, for CHRYSLER, for JEEP, for DODGE, for FORD, for TOYOTA, for NISSAN, for HONDA, for BMW, for BENZ, for HYUNDAI, for MAZDA and more to come.) Full System Diagnostic Scan Tool & 8-in-1 Live Data Graph & Auto VIN XTOOL D8 can access and scan all available modules and systems in your vehicle; such as ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, fuel system, light system, A/C system, etc.Read Code:Read the fault code, fault description, and fault code status within the selected module.Clear Code:Clear the fault code in the selected module and turn off the fault light on the meter.Read Live Data:Reading all the data flow information contained within the selected module.Read Freeze Frame:Accompanied by fault codes, record the state of fault codes appearing.Read E#CU Information:Read the version information, model information, etc. of the selected module. 8-in-1 PIDs in graphing for more in-depth analysis, IncludeRead, graph and combine 8 separate sensor data streamsAllows you can export the live data to csv file for storage and comparison over time, or view its graphing change and text readings soon afterwards.Scan Vehiclein 4 WaysAuto VIN & Scan: Automatically identify your car information without manually entering the VIN (Vehicle Identification Number) and Quickly scan your car to find the cause of the vehicle failure.Code Scan: Identify your car by photographing its VIN nameplate.Manual Enter: Manually enter the VIN number to scan car faults.Select Vehicle by Area: Scan the car faults by selecting the car model from the menu.Note: Auto VIN function couldn't compatiable with all vehicles Bi-directional Control (Active Test) XTOOL D8 bidirectional scan tool can use active tests to output commands to the E#CU, to turn on/off control modules or components without using the vehicle controls, thus saving diagnosis time.〰️Commonly-Used Tests include:EVAP Vent /Purge Solenoid, EVAP Purge/SealFuel Injector TestCycling A/C Clutch RelayCycling ABS Motor PumpCooling Fan TestHVAC RecalibrationWindow/Light/Door Lock/Headlamp Test 38+ Hot Reset Functions:XTOOL D8 comprehensive Service Options, Resets, Relearns, Matchings, Adaptations, Initializations, Calibrations, Adjustments to meet the tasks of everyday auto maintenance services.Oil Rest：Reset the new calculation of Engine Oil Life System for an accurate reading of the next oil change.Throttle Reset：Reset the throttle to accurately regulate throttle ( or idle engine ) operations, helps keep your idling and acceleration smooth. EPB Reset：Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.SAS Adjustment：Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.Gearbox Match：Write, match and self-study serial numbers for newly replaced parts of the gearbox.BMS Reset：Reset the BMS system after replacing the vehicle battery.Injector ：Replace the injector/Adjust the sequence of the original vehicle injector/Recode the injector after replacing the original vehicle E#CU.D#PF：Regenerate exhaust gas generated during vehicle operation.Gear Learning：After replacing the crankshaft position sensor or replacing the timing belt, learn the crankshaft position sensor to ensure normal operation of the engine.TPMS Reset：After the vehicle has a flat tire or a tire is replaced, reset the tire pressure monitoring system and turn off the tire pressure warning light.Power Balance：After repair, conduct tightness and balance tests on the cylinder and adjust the power balance of the cylinder.Tire Upgrade：The modified tire data needs to be written into the vehicle module through the diagnostic instrument to avoid inaccurate vehicle information prompted by the vehicle instrument.Transport Mode：Many functions of the vehicle in transportation mode are limited and cannot be used. Transportation mode can be released through the diagnostic tool.A/F Reset：By flashing the data parameters inside the E#CU, the engine torque is changed to achieve the maximum horsepower of the engine.Electronic Pump Activation：Activate the electronic water pump to check for fault points in the cooling system/drain the air in the cooling system.Suspension：After the air suspension module or other original parts are replaced and repaired, the suspension system is matched.Seat Match：Automatically configure the internal data of the seat module to ensure the normal use of the seat adjustment function.EEPROM：Auxiliary functions for anti-theft matching and meter mileage adjustment --> reading anti-theft information and flashing the meter.ECU Configurations(New)：Query the hidden functions that can be flashed on the vehicle and flash them. ADAS Calibration(New)：After replacing the modules and sensor cameras in the ADAS system, recalibrate and learn the ADAS system.Specific functions also include: Headlight Reset,ABS Bleeding,Stop/Start Reset,Windows Initialization,Airbag Reset,Language Change,Control Unit Reset,Rain/Light Sensor Relearn,A/C Relearn,HV Battery,VGT Relearn,FRM Reset,EGR Relearn,SRS Calibration,Clutch Adaption,Disable Speed Limit...Note: Special Functions vary across vehicle makes, models, year. Please come to us with VIN number to check compatibility before purchasing. Full OBD2 Functions 【Read Trouble Code】Displays the fault codes currently stored in the powertrain that cause the MIL lamp to illuminate【Clear Trouble Code】Clear fault codes and freeze frames in the powertrain that have illuminated the MIL light, and pending fault codes【Live Data】Recognizes vehicle powertrain information and displays currently available data on diagnostic equipment.【Read Freeze Frame】Displays freeze frame data such as the time when the error code appeared, mileage, and other information.【I#M Readiness】Identify vehicle powertrain information such as engine speed, water temperature, ignition advance angle, intake pressure, and fuel system closed loop status.【On-Board Monitor Test】Test results of in-vehicle systems and in-vehicle monitors.【O2S Monitoring Test】Displays the Oxygen Sensor Monitor screen and the collected oxygen sensor test results.【Component Test】Control testing of online systems or components.【Vehicle Information】Display the whole vehicle information. Vehicle identification code, calibration ID, calibration verification ID, E#CU name and other information. CANFD Protocol Supported + Wide Car Coverage + 3-Years Free Software Update + 15 Language Supported CANFD Protocol Supported+Wide Car Coverage:XTOOL D8 auto scanner support CANFD(for GM 2020+ cars) for faster data transfer.It can work on 88+ car brands, 140+ models and 10,000 cars. 3-Years Free Software Update(Value of $600) + 15 Language Supported:The scanner comes with 3 years free software updates to add new incoming features, newer vehicle coverage and improve software performance, and 24/7 tech support.Support 15+ language includes:English, German, Spanish, French, Polish, Portuguese, Russian, Italian, Turkish, Chinese, Japanese, Korean, Vietnamese, Arabic, Finnish... FAQHow to Print a Diagnostic Report>>The XTOOL device is compatible with third-party print drivers. You can download the printer driver you need in the browser that comes with the tablet to install it, and then set your printer in the OS settings. After the configuration is completed, you can print Reports How to Switch Language1. Contact with us via eBay message about the language you need. We will contact with the technician to modify the language configuration for you in the backend system. 2. Settings->Language->Choose language 3. Back to Updates to update all the software again Failed to Diagnose Vehicle1. Contact with us to confirm whether the vehicle model is supported by the scan tool. 2. Check whether the vehicle is properly connected (e.g. whether the ignition is ON, and the Diagnostic of some vehicles need to turn on the engine) 3. Confirm whether you have entered the correct Diagnostic menu. 4. Confirm whether the AUTO-SCAN function can assist you to enter the correct Diagnostic menu. 5. Check whether the software is the latest version. If not, please update to the latest version and retest. Failed to Turn on When Charging>>In the charging state, you need to first press the power button to light up the screen (showing the charging status). Then press and hold the power button for 4-5 seconds until the boot animation is shown on the screen.Failed to Open the Diagnostic App>>The tablet has to connect to the network every 30 days, otherwise, the Diagnostic app will be locked and disabled until the device is connected to the network. After connecting to the network, the APP will be available again. If the device is still unavailable, please contact XTOOL technical support team for help.PaymentDelivery detailsTerms of salesAbout usContact usPaymentWe accept Credit cards、Debit card、Apple Pay、Google Pay、PayPal ect. payment. Please pay for your item within 3 days of the auction end time. Note: We are not responsible for buyers’ local taxes. Import duties, taxes and charges which are not included in the item price or shipping cost are the buyers' responsbility. Please include your special requests in eBay note if there is any.Delivery detailsOrder will be shipped within 1-3 business days after payment confirmed. Usually, shipping takes around 5-7 business days. We'll try our best to provide you the most reliable and affordable way of shipping service. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem. Please make sure it is correct and include phone number for delivery. Terms of salesWe are authorize distributor, our all items are 100% original and Our devices have warranty. All items are guaranteed to be carefully checked before shipping out. If the item you received is defective, please contact us firstly, offer us figures/video for proof, we'll help you to deal with the situation and take the duty. Please feel free to contact with us via ebay message if you have any questions while using the item. Return Policy: Please return the item within 30 days after receiving if you are not happy with your purchasing. All returns are expected to be in original conditions, please email us first for return address and instructions. About usDear buyers, we will appreciate a positive feedback with all 5 star rating when you are satisfied Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases. Contact usWe care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 business hours for us to respond.

Price: 479 USD

Location: Ontario, California

End Time: 2024-11-06T09:25:00.000Z

Shipping Cost: 0 USD

Product Images

XTOOL D8 Auto OBD2 Bidirectional Scanner All System Diagnostic CANFD Coding Tool

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Brand: XTOOL

Type: OBD2 Scanner

OBD Interface: CAN, EOBD, OBD, OBDII

Features: Backlit Display, Built-In Battery, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly

Supported System: ABS, EPB, SAS, SRS, TPMS

Advantages 1: All System Diagnostic

👋Advantages 2: Bi-directional Control / Active Test

👋Advantages 3: E#CU Coding & Configuration

👋Advantages 4: Programmable Module Installation(PMI)

👋Advantages 5: 38+ Reset services

👋Advantages 6: CANFD Protocol

👋Advantages 7: Auto VIN Scan

👋Advantages 8: One-click Update via WIFI

👋Advantages 9: 8-IN-1 Live Data Stream

👋Advantages 10: ADAS Calibration

👋Advantages 11: Full 10 OBD2 Modes