Wilwood 810-14122 Pro Spindle 2.5 Inch Drop 1963-70 C10 Single Side Machined

Description: New, only have one. Spindle only, no other hardware included. Box is weathered and worn. One small scuff on the inner edge (see pictures). Reselling as is at a discount. 1963-1970 CHEVROLET C10 TRUCK* *For additional vehicle compatibility, visit www.wilwood.com From kit: WILWOOD FRONT 2.50” DROP PROSPINDLE KIT 831-14201 DISC BRAKES SHOULD ONLY BE INSTALLED BY SOMEONE EXPERIENCED AND COMPETENT IN THE INSTALLATION AND MAINTENANCE OF DISC BRAKES READ ALL WARNINGS WARNING IT IS THE RESPONSIBILITY OF THE PERSON INSTALLING ANY BRAKE COMPONENT OR KIT TO DETERMINE THE SUITABILITY OF THE COMPONENTORKITFORTHATPARTICULARAPPLICATION. IFYOUARENOTSUREHOWTOSAFELYUSETHISBRAKECOMPONENTOR KIT, YOU SHOULD NOT INSTALL OR USE IT. DO NOT ASSUME ANYTHING. IMPROPERLY INSTALLED OR MAINTAINED BRAKES ARE DANGEROUS. IF YOU ARE NOT SURE, GET HELP OR RETURN THE PRODUCT. YOU MAY OBTAIN ADDITIONAL INFORMATION AND TECHNICALSUPPORTBYCALLINGWILWOODAT(805)388-1188,ORVISITOURWEBSITEATWWW.WILWOOD.COM. USEOFWILWOOD TECHNICAL SUPPORT DOES NOT GUARANTEE PROPER INSTALLATION. YOU, OR THE PERSON WHO DOES THE INSTALLATION MUST KNOWHOWTOPROPERLYUSETHISPRODUCT. ITISNOTPOSSIBLEOVERTHEPHONETOUNDERSTANDORFORESEEALLTHEISSUES THAT MIGHT ARISE IN YOUR INSTALLATION. RACING EQUIPMENT AND BRAKES MUST BE MAINTAINED AND SHOULD BE CHECKED REGULARLY FOR FATIGUE, DAMAGE, AND WEAR. Need Additional Information? Use Your SmartPhone and Jump to Our Technical Tips Section on Our Web Site. WARNING DO NOT OPERATE ANY VEHICLE ON UNTESTED BRAKES! SEE MINIMUM TEST PROCEDURE WITHIN ALWAYS UTILIZE SAFETY RESTRAINT SYSTEMS AND ALL OTHER AVAILABLE SAFETY EQUIPMENT WHILE OPERATING THE VEHICLE IMPORTANT • READ THE DISCLAIMER OF WARRANTY INCLUDED IN THE KIT NOTE: Some cleaners may stain or remove the finish on brake system components. Test the cleaner on a hidden portion of the component before general use. Important Notice - Read This First Before any tear-down or disassembly begins, review the following information: • The spindle in this kit requires later model 1973-1987 C10 upper and lower ball joints, not included. • Due to OEM production differences and other variations from vehicle to vehicle, the fastener hardware and other components in this kit may not be suitable for a specific application or vehicle. • It is the responsibility of the purchaser and installer of this kit to verify suitability / fitment of all components and ensure all fasteners and hardware achieve complete and proper engagement. Improper or inadequate engagement can lead to component failure. Photographic Tip Important and highly recommended: Take photos of brake system before disassembly and during the disassembly process. In the event, trouble-shooting photos can be life savers. Many vehicles have undocumented variations, photos will make it much simpler for Wilwood to assist you if you have a problem.

Price: 99.99 USD

Location: Salt Lake City, Utah

End Time: 2024-02-13T03:39:31.000Z

Shipping Cost: 18.4 USD