Wagan Tech 40A DC to DC Battery Charger

Description: Intelligent 3-Stage ChargingOur Intelligent 3-stage charging uses a high speed microcontroller and a proprietary charging algorithm to deliver a sophisticated 3 stage charging process.The first stage, bulk charge (constant current), charges the battery fast while the second stage, absorption (constant voltage), ensures the battery is thoroughly charged.The third stage, float, monitors and keeps the battery at a safe voltage allowing it to be maintained and ready for use. Works with Most Battery TypesOur DC to DC Charger works with:SLA (Sealed Lead Acid)Flooded Lead-acidGelAGM (Absorbed Glass Mat)CalciumLiFePO4 Lithium Iron Phosphate batteries**LiFePo4 batteries must have a Battery Management System (BMS) in place.Solar Panel Charging (MPPT)Our DC to DC Charger utilizes sophisticated MPPT (Maximum Power Point Tracking) solar regulator technology. MPPT maximizes the power generated from your solar panels to the auxiliary battery. The static efficiency of the MPPT algorithm is >97%, and the dynamic efficiency is >95%. This DC to DC Battery Charger can be used with solar panels up to 600W combined in 12V systems and 1200W combined in 24V systems.Straight-Forward InstallationColor-coded & labeled wires makes it easy to identify routing locationInstruction Manual is detailed and indicates all necessary installation proceduresCompact size makes finding an installation site easyHeat, vibration, water, and dust protected for limitless installsButt-splice connectors are includedMounting plate is integrated into unit's design making installation a breezeIntegrated Safety FeaturesSpark-Free ProtectionThe 40A DC to DC Battery Charger will not start charging the battery (no output) unless the load is securely connected (except the LiFePO4 mode which allows 0 volt start); this prevents the leads from sparking due to accidental short circuit making the charger safer to use around batteries.Reverse Connection ProtectionReverse Connection or "reverse polarity" on input and output terminals will not damage the internal circuitry. Our Charger detects reverse connection conditions and indicates to the user whether input or output connection is reversed.Over and Under Voltage ProtectionThe charger will automatically shut down if there is an over voltage or under voltage condition detected to protect the user and the charger.Over Temperature ProtectionThe charger will lower its output current if the temperature of the unit begins to exceed its pre-set threshold.

Price: 350 USD

Location: Springfield, Missouri

End Time: 2025-01-02T19:38:28.000Z

Shipping Cost: N/A USD