Viper 3105V Alarm Replacement Remote Control 7145V EZSDEI7141 1-Way car starter

Description: Why purchase a recycled keyless entry remote transmitter?Vipers's 7145V 4-button keyfob transmitter works with the following systems: 350Plus, R350, 3105V, 3305V, and 4105V car security systems. Its 1-way transmissions send your commands to the alarm, while its four buttons cover arming and disarming the alarm, locking and unlocking the doors, a "panic" button, and auxiliary output features that can be added (like a trunk release). The 7145V includes two CR2016 batteries and has a range of 1500 feet. This remote is an ideal replacement for a lost remote The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today! Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #. What are you purchasing? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system. Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below. Manufacturer Viper DEI Directed Electronics D.E.I inc. Python Compatible FCC ID#(s): EZSDEI7141 Alternate Spellings EZSDE17141 Interchangeable FCC ID #s: EZSDEI7141 EZSDEI7i41 EZSDEI7i51 EZSDEI7151 Model #(s) 7141V or 7142V7131 7131V 7131P 7131X 7141 7141V 7141P 7141X 7142 7142V 7142P 7142X 7151 7151V 7151P 7151X Button Count: 4: Lock Unlock AUX "*" / Blue LED Light Battery (installed): 2: CR2016 Frequency: 433.92 433 - 434 MHz LED Light Color: Blue Condition Notes: Pre-Owned; ready to be programmed to your vehicle’s compatible RKE aftermarket system >> Remote has chips in the casing, a hole drilled & key ring installed and faded button grpahics. Compatible Aftermarket Installed Systems: 350Plus, R350, 3105V, 3305V, and 4105V car security systems. 210 HV 211 HV 300 HF PC 300 HF (ESP) 300+ HF 330 V 350 HV RESPONDER 350 350+ Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop. The 7145V transmitter is equipped with 4-buttons, and features 1-way operation (transmitter-to-alarm). The buttons control the following features and functions of the security system: LOCK: Locks the doors and arms the vehicle UNLOCK: Unlocks the doors and disarms the vehicle AUX: Activates Silent Mode and Auxiliary Output functions if equipped PANIC: Activate alarm to find car or to alert people to danger Combination: combining Lock and Unlock buttons together will control an Auxiliary Output Batteries: The 7145V uses two CR2016 Lithium Coin-Cell 3V batteries, which can be user-replaced when they become weak. It is wise to replace batteries every 2 years to prevent remotes from being destroyed by leaking batteries. At Remotes And Keys, you get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. We verify what is in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices. Programming Procedure: Alarm must be disarmed. Valet mode won?? work. The red LED must be off. If there is no working remote and the alarm sounds when you open the door or start the vehicle then do the following: Press valet switch for one second and release with the ignition ON. If that doesn?? work then do it with ignition OFF. Adding a new remote for DEI system 4105V: 1. Open driver door until the remote is programmed. 2. Turn the ignition to ON. 3. Within 5 seconds of step 2 press the valet/program switch 1 time, release it, press it again and hold it. You may hear a chirp, beep, or honk and the LED light on dash will flash once. Do not release button. 4. Within 5 seconds press the arm button on the remote transmitter. You may hear chirp, beep, or honk. 5. Release the valet/programming switch. 6. Turn ignition to OFF. Adding a new remote for DEI systems 350Plus, R350, 3105V, 3305V: 1. Open driver door until the remote is programmed. 2. Turn the ignition to ON. 3. Within 5 seconds of step 2 press the valet/program switch 7 times, and hold it on the eighth. You may hear a chirp, beep, or honk and the LED light on dash will flash. Do not release valet/program switch. 4. Within 5 seconds press the LOCK button on the remote transmitter. You may hear chirp, beep, or honk. 5. Release the valet/programming switch. 6. Turn ignition to OFF. If you don?? know what a valet switch/button is or you can?? find Programming Procedure: Alarm must be disarmed. Valet mode won?? work. The red LED must be off. If there is no working remote and the alarm sounds when you open the door or start the vehicle then do the following: Press valet switch for one second and release with the ignition ON. If that doesn?? work then do it with ignition OFF. Adding a new remote for DEI system 4105V: 1. Open driver door until the remote is programmed. 2. Turn the ignition to ON. 3. Within 5 seconds of step 2 press the valet/program switch 1 time, release it, press it again and hold it. You may hear a chirp, beep, or honk and the LED light on dash will flash once. Do not release button. 4. Within 5 seconds press the arm button on the remote transmitter. You may hear chirp, beep, or honk. 5. Release the valet/programming switch. 6. Turn ignition to OFF. Adding a new remote for DEI systems 350Plus, R350, 3105V, 3305V: 1. Open driver door until the remote is programmed. 2. Turn the ignition to ON. 3. Within 5 seconds of step 2 press the valet/program switch 7 times, and hold it on the eighth. You may hear a chirp, beep, or honk and the LED light on dash will flash. Do not release valet/program switch. 4. Within 5 seconds press the LOCK button on the remote transmitter. You may hear chirp, beep, or honk. 5. Release the valet/programming switch. 6. Turn ignition to OFF. Programming option #1: 1) Door. Open Door. 2) Key. Turn the key to the ON position. 3) Choose. Within 5 seconds press and release the Valet/Program button the number of times corresponding to selected channel listed below. After you have selected the channel, press the Valet/Program button once more and hold it. The LED flashes the same number of times as the channel selected and the siren (if connected) chirps to confirm the selected channel. DO NOT release the Valet/Program button! 4) Transmit. While holding the Valet/Program button, press the button from the transmitter. The unit chirps (if horn or siren are connected) to confirm that the transmitter has been taught to the receiver. 5) Release. Now that the code is learned, you may release the Valet/Program button and remove the key. CHANNEL NUMBER FUNCTION 7) ----------------------------------- AUTO-LEARN STANDARD CONFIGURATION 9) ---------------------------------- DELETE ALL TRANSMITTERS Programming option #2: 1.IGNITION ON: Turn the ignition to the run position or start the engine. 2. ENTER PIN: Enter the factory preset PIN code 2 by pressing (*) on the Valet switch twice, then (gray square) on the Valet switch once. Note: If the factory preset PIN has been changed, the new PIN must be entered. 3.HOLD/CHIRP/RELEASE: After entering the PIN code, press and Hold (*) on the Valet switch until a chirp is heard & the LED turns on, then release the button. You have now entered the feature selection position of the User Selectable Features grid. 4.COLUMN SELECT: Press (gray square) on the Valet switch the same number of times as the desired column. After a pause, the siren will chirp the same number of times as the selected column for confirmation. 5.FEATURE SELECT: Press (*) on the Valet switch the same number of times as the desired feature. The siren will chirp with each press. The feature can now be changed using the remote transmitter. 6.FEATURE CHANGE: Press (unlock/lock) on the transmitter. If the system chirps once, the feature has just turned off; if the system chirps twice, the feature has just turned on. If the feature has more than two settings, continue pressing (unlock/lock) on the transmitter to toggle through the settings. You can advance to any feature in the same column by pressing (*) within 60 seconds; to program a feature in a different column, begin at step 4 within 60 seconds. 7.EXIT PROGRAMMING: To exit programming mode, turn the ignition off or wait 60 seconds without pressing the Valet switch. The siren will chirp 3 times to indicate programming mode has been exited. AUTO-PROGRAM REMOTE: Auto-learn remote to the system in the standard button configuration. Once you have entered the feature, press (unlock/lock) on the transmitter until you hear a confirmation indicating the new remote is learned. Why does your vehicles installed RKE / Security system determine which remote control your can purchase? The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system. Programming: We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer. Programming Requirement Information NOTE: The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions: 1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems. 2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence. To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following: i. If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote) ii. If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?) 3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand. 4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems). 5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems). 6. There are also many auto forums that you can go onto by just conducting a google search with your questions. 7. or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer. Normal 0 false false false EN-US X-NONE X-NONE

Price: 24.49 USD

Location: Wellsboro, Pennsylvania

End Time: 2024-09-19T20:12:15.000Z

Shipping Cost: 6.96 USD

Product Images

Viper 3105V Alarm Replacement Remote Control 7145V EZSDEI7141 1-Way car starter

Item Specifics

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

LED color: Blue LED Light

Custom Bundle: No

Frequency:: 315

2-Way Paging: No

Unit Type: Unit

Features: Remote Start, Trunk Release, Ready to Program - Battery Installed, TESTED - working 100% refurbished, Blue LED Light, ready to program TESTED Works 100% Battery installed BLUE LED OEM, Vehicle Start keyfob controller beeper opener door keyfab fab, OEM FACTORY ORIGINAL AUTHENTIC with Battery installed, Keyless entry remote car key fob control transmitter starter clic

Stock #: 618B

Unit Quantity: 1

Model #(s): 7141V 7142V 7131 7131V 7131P 7131X 7141 7141V 7141

Non-Domestic Product: No

Other Part Number: 12 12.2 12.5 70.5 7131 7141 7142 7151 beeper fab

Warranty: 60 Day

Compatible Aftermarket Systems: Arrow 5.1 Avantguard 5.1 Avital 4103 Clifford Matr

Color: Black

Battery Type:: Installed - 2: CR2016

Manufacturer Part Number: FCC ID EZSDE17141 EZSDEI7141 DEI EZS DE17141 car starter key fob

Modified Item: Yes

California Prop 65 Warning: N/A