NISMO

TexElec's IBM PCjr Serial / CGA Breakout Board - For IBM PCjr

Description: TexElec's IBM PCjr Serial / CGA Breakout Board - For IBM PCjrTexElec's IBM PCjr Serial / CGA Breakout Board - For IBM PCjr. This board is designed to plug into the back of your PCjr, and allow you to connect a standard CGA monitor and a standard Serial device. It is difficult and expensive to find the original cables for the proprietary ports on the PCjr, and this board allows you to have the ports this machine should have had all along! This board has two jumpers which allow you to change the polarity of the horizontal and vertical output pins from positive to negative. Most monitors will work fine with the default settings, but the PCjr offered negative polarity on its port so we made the settings available. Be careful when plugging this board into your PCjr. The space around the pins is fairly large on the PCjr, and it is possible to plug the connector's top row into the bottom row of the PCjr pins if you are not careful. I had this issue myself when testing, and no damage occurred, however, the board will not work. If you have an issue getting the board to work, please look closely and ensure the board is connected properly. One last caveat is that the pins do not quite go in all of the way. The header pins on these boards were the longest I could locate and the board tends to lean out a little. You might want to put some double sided tape on the back to secure the board if you plan to leave it in permanently. Please see our video here if you want to see the board in action: https://www.youtube.com/watch?v=9vtTHdkWwJk Please note, the boards may have different parts than pictured but retain the same functionality. Over time, some parts are discontinued, or change colors and we update them as needed. Please ask any questions you have before bidding/buying, I do my best to represent the items I list correctly and don't want anyone, myself included, to have any surprises. Please be sure to see my other listings. I will be selling a lot of my excess electronics, vacuum tubes, electronic parts, computer parts, music equipment, and much more. Thanks for looking and happy bidding!

Price: 24.99 USD

Location: Aledo, Texas

End Time: 2024-03-14T22:33:11.000Z

Shipping Cost: N/A USD

Product Images

TexElecTexElecTexElec

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Interface Card Type: PCjr Serial / CGA Breakout Board

MPN: PCjr Serial / CGA Board

Brand: TexElec

Compatible Port/Slot: PCJr

Recommended

TexElec's 8 Bit ISA Prototype Card v1.0 (PCB Only)
TexElec's 8 Bit ISA Prototype Card v1.0 (PCB Only)

$10.99

View Details
TexElec's IBM PCjr Serial / CGA Breakout Board - For IBM PCjr
TexElec's IBM PCjr Serial / CGA Breakout Board - For IBM PCjr

$24.99

View Details
TexElec's Resound New Wave MCA – Sound Blaster MCV Compatible Card for IBM PS/2
TexElec's Resound New Wave MCA – Sound Blaster MCV Compatible Card for IBM PS/2

$124.99

View Details
TexElec's Commodore 64/128 Cartridge / Expansion Port Prototype Card w/ EEPROM
TexElec's Commodore 64/128 Cartridge / Expansion Port Prototype Card w/ EEPROM

$19.99

View Details
TexElec's jr-IDE Rev.B for the PCjr by Retrotronics
TexElec's jr-IDE Rev.B for the PCjr by Retrotronics

$127.99

View Details
TexElec's ISA IDE to SD Adapter
TexElec's ISA IDE to SD Adapter

$59.99

View Details
Resound 2 OPL3 – 8 Bit ISA Adlib Compatible Sound Card - by TexElec
Resound 2 OPL3 – 8 Bit ISA Adlib Compatible Sound Card - by TexElec

$39.99

View Details
TexElec's TandyMod – Tandy Mode Graphics Board for the PCjr by Alan & Chuck
TexElec's TandyMod – Tandy Mode Graphics Board for the PCjr by Alan & Chuck

$9.99

View Details
Quad-Flop – Four Port ISA Floppy Controller by TexElec
Quad-Flop – Four Port ISA Floppy Controller by TexElec

$59.99

View Details
RGBtoHDMI – 6-bit TTL Edition by TexElec
RGBtoHDMI – 6-bit TTL Edition by TexElec

$99.99

View Details