TB 143cc Big Bore Kit, Race Head V2, & Intake Kit

Description: TB 143cc Big Bore Kit, Race Head V2, & Intake Kit – KLX110 2010+ 143cc Race Head V2, Big Bore Kit, and Intake Kit Contains the following: Race Head V2 – Forged Aluminum Roller Rockers, 30mm intake valve, 24.5mm exhaust valve, 27mm intake port, 23mm exhaust port (valves installed). Race Camshaft V2-1 for Race Head V2 Ceramic coated all aluminum cylinder (no steel sleeve) Updated Lightweight high compression domed 60mm piston with rings, pin, & clips Head gasket kit – includes the cylinder head o-ring set and an exhaust gasket. Race Head V2 Intake Kit Cam Sprocket This kit is the same as the complete kit minus the carburetor, throttle cable, and air filter. It does include the Intake Kit that port matches the V2 head and allows you to run the following boot/spigot mount type carbs: Mikuni VM24, VM26, & VM28 Keihin PE26 & PE28 OKO 26mm Our TB 28mm Aftermarket versions of the above Mikuni and Keihin carbs (boot/spigot type only) Our TBW0321 throttle cable will work with most of the above carbs. For the air filter, a 42mm or 49mm mount filter will work depending on the carb used and we have both types available in this section. Features of this kit: It includes our Race Head V2, camshaft, and a larger intake manifold. While this head may appear to be the same on the outside as our previous (discontinued) race head and stock heads, internally it’s has numerous differences. The addition of forged aluminum roller rocker arms and a new camshaft are the biggest changes followed by bigger valves and ports. The exhaust valve (like the intake valve) is now stainless steel too (21-4N material). This all adds up to a cylinder head that puts out a professional level of performance yet is still affordable. The kit also includes an all aluminum ceramic coated cylinder. This cylinder is lighter than a steel sleeved aluminum cylinder, reduces friction (increasing power), improves sealing, and provides better heat transfer (runs and cools down quicker). In 2020 we upgraded the piston for higher compression and more power. Unlike other kits, our head gasket kit also includes a head o-ring set and exhaust gasket so you don’t have to re-use your old ones or make a trip to your local dealer to get new ones and spend more money. These are high quality parts and require no machining to the cases or other modifications – bolt on and go! Add a stroker crankshaft for even more power! There are no installation instructions, but if you can replace your piston, you can install this kit. If you don’t have any experience working on your engine, we highly recommend having a professional technician install this kit or, at a minimum, purchasing the shop manual for your bike available from your local Kawasaki or Suzuki dealer. TB 143cc Big Bore Kit, Race Head V2, & Intake Kit – KLX110 2010+ 143cc Race Head V2, Big Bore Kit, and Intake Kit Contains the following: Race Head V2 – Forged Aluminum Roller Rockers, 30mm intake valve, 24.5mm exhaust valve, 27mm intake port, 23mm exhaust port (valves installed). Race Camshaft V2-1 for Race Head V2 Ceramic coated all aluminum cylinder (no steel sleeve) Updated Lightweight high compression domed 60mm piston with rings, pin, & clips Head gasket kit – includes the cylinder head o-ring set and an exhaust gasket. Race Head V2 Intake Kit Cam Sprocket This kit is the same as the complete kit minus the carburetor, throttle cable, and air filter. It does include the Intake Kit that port matches the V2 head and allows you to run the following boot/spigot mount type carbs: Mikuni VM24, VM26, & VM28 Keihin PE26 & PE28 OKO 26mm Our TB 28mm Aftermarket versions of the above Mikuni and Keihin carbs (boot/spigot type only) Our TBW0321 throttle cable will work with most of the above carbs. For the air filter, a 42mm or 49mm mount filter will work depending on the carb uséd and we have both types available in this section. Features of this kit: It includes our Race Head V2, camshaft, and a larger intake manifold. While this head may appear to be the same on the outside as our previous (discontinued) race head and stock heads, internally it’s has numerous differences. The addition of forged aluminum roller rocker arms and a new camshaft are the biggest changes followed by bigger valves and ports. The exhaust valve (like the intake valve) is now stainless steel too (21-4N material). This all adds up to a cylinder head that puts out a professional level of performance yet is still affordable. The kit also includes an all aluminum ceramic coated cylinder. This cylinder is lighter than a steel sleeved aluminum cylinder, reduces friction (increasing power), improves sealing, and provides better heat transfer (runs and cools down quicker). In 2020 we upgraded the piston for higher compression and more power. Unlike other kits, our head gasket kit also includes a head o-ring set and exhaust gasket so you don’t have to re-use your old ones or make a trip to your local dealer to get new ones and spend more money. These are high quality parts and require no machining to the cases or other modifications – bolt on and go! Add a stroker crankshaft for even more power! There are no installation instructions, but if you can replace your piston, you can install this kit. If you don’t have any experience working on your engine, we highly recommend having a professional technician install this kit or, at a minimum, purchasing the shop manual for your bike available from your local Kawasaki or Suzuki dealer. × Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like Axle Adjuster Blocks-Billet w/ Hardware - Red - BBR SuperComp/ProComp Swingarms BBR Chain Roller - SuperPro/Perimeter Frames Rear Brake Pedal Spring - MM12P - BBR Perimeter KLX/DRZ110 BBR Skid Plate - Bronze Cerakote - CRF110F - 2013-Present Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Keystone Cycle Parts Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 661.95 USD

Location: Abbottstown, Pennsylvania

End Time: 2025-01-01T14:53:46.000Z

Shipping Cost: N/A USD