Tannoy CMS 601 DC Full Range Loudspeakers

Description: Tannoy CMS 601 DC. Condition is New. Sold in pairs, Price is each. Buyer pays for shipping. The Tannoy CMS 601DC is a full bandwidth; high power and high sensitivity ceiling monitor system; a compact unit that is specifically designed for applications requiring the combination of uncompromising 'superior quality' sonic performance for music and speech reinforcement, exceptional intelligibility and long term reliability.The design comprises a 165 mm (6.5”) Dual Concentric™ point-source transducer mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. Spring loaded self-aligning clamps make for quick and easy installation, while all models are also supplied with two tile support rails and one C-ring included in the package. A plaster (mud) ring is available as an optional accessory.The zinc plated steel back cans have an integrated, recessed termination box. The removable locking connector has screw terminals for secure wire termination and "loop through" facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit.The CMS 601DC is equipped with a low insertion loss 60 W line transformer easily configurable to various tappings via front baffle mounted rotary switch, for use in constant voltage distributed audio systems. Two model variants are available (one 'blind-mount' version with integrated back can, the other without) and a separate back can are available to satisfy the vast majority of installation application requirements SystemFrequency Response (-3dB) 75Hz - 30kHz Back canFrequency Range (-10dB) 50Hz - 30kHz Back canSystem Sensitivity (1W @1m) 91dB (1W = 2.45V for 6W)Nominal Coverage Angle90 degrees conicalCoverage Angle (1kHz to 6kHz)111 degreesDirectivity Factor (Q)4.7 averaged 1kHz to 6kHzDirectivity Index (DI)6.5 averaged 1kHz to 6kHzRated Maximum SPL110dB (average), 116dB (peak)Power Handling Average: 80W, Programme: 160W, Peak: 320WRecommended Amplifier Power160W @ 8WNominal Impedance8 ohmsTransformer Taps70V: 60W / 30W / 15W / 7.5W / OFF & low impedance operation100V: 60W / 30W / 15W / OFF & low impedanceCrossover2kHz - 2nd order LF, 3rd Order HF (with dynamic HF protection)TransducersLow Frequency165mm (6") Dual Concentric™ constant directivity driver with multi fibre paper pulp coneHigh Frequency25mm (1") titanium dome with neodymium magnet systemPhysicalEnclosureBack can: Zinc plated steel, Baffle: Reflex loaded UL 94V-0 rated ABS, Grille: SteelSafety FeaturesSafety ring located at rear of enclosure for load bearing safety bondClamping DesignMin / Max Clamping Range: 8 mm (0.32") / 29 mm (1.14") Recommended Clamp Torque: 1.5NmBack Can OptionsComplete with fixed back canCable Entry OptionsCable clamp & squeeze connector for conduit up to 22 mmConduit Knockouts3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”)ConnectorsRemovable locking connector with screw terminals with "loop through" facilitySafety Agency Ratings (pending)UL-1480, UL-2043, CEIncluded AccessoriesC Ring, tile bridge, paint mask, cutout template, grilleOptional AccessoriesPlaster (mud) ringHole Cutout Diameter253 mm (9.96")Dimensions (Bezel Diameter)280 mm (11.02")Dimensions (Front of Ceiling to Rear of Back Can)258 mm (10.16")Dimensions (Front of Ceiling to Top of Safety Loop)275.30 mm (10.84")Weight (ea)16.42 lbs (7.45 kg)

Price: 450 USD

Location: Geneva, Illinois

End Time: 2024-02-04T17:27:53.000Z

Shipping Cost: 0 USD