NISMO

Sodium carboxymethyl cellulose, 99.5+%, high viscosity, BioReagent, 30g

Description: GTI LABORATORIES SUPPLIES Affiliate of Green Technologies Inc. of Houston A Leader in Laboratory Chemical Redistribution Services 5611 Northdale St., Houston, TX 77087 804-240-4719 FOR RESEARCH & DEVELOPMENT ACTUAL CERTIFICATE OF ANALYSIS Laboratory Chemicals for Research and Development Not for direct use in food, cosmetics and or pharmaceuticals. Sodium carboxymethyl cellulose Carboxymethylcellulose sodium salt; Carboxymethylcellulose sodium; Cellulose carboxymethyl ether sodium salt; CMC sodium salt; Polyanionic cellulose; It is used as viscosity modifiers to stabilize the emulsions. It is used as a lubricant in artificial tears and it is used to characterize enzyme activity from endoglucanases. It acts as a stabilizer in foods. It is also employed in pharmaceuticals as a suspending agent and excipients for tablets. Also, used in drilling muds, in detergents as a soil-suspending agent, in resin emulsion paints, adhesives, printing inks, textile sizes and protective colloid. high viscosity, BioReagent Lot CA194 2094KTCS CAS 9004-32-4 Formula - Mw - Assay (dry basis) 99.96% Appearance of solution passes Arsenic <0.0003% Degree of polymerization ~3200 Degree of substitution 0.8 Free glycolate <0.4% Heavy metal <0.0015% Identity test passes Insoluble matter in water passes Iron 0.00034% Lead <0.2ppm Loss on drying 7.0% Molecular weight ~ 700kDa pH of 1% solution 6.7 Residue on ignition 29.1% Sodium <12.4% Sodium chloride <0.5% Total plate count <1000cfu/g Viscosity (1% aqueous solution) 2510mPas White powder Yeast & mold <500cfu/g Quantity Control Wayne Mosley, RET., chemist 05-04-2016 FOR RESEARCH & DEVELOPMENT Not for direct use in food, cosmetics and or pharmaceuticals. MANUAL REVIEW REQUIRED BEFORE MATERIAL IS RELEASED Not applicable Note*** All listings that doesn’t offer international purchases on eBay, its due to eBay shipping policy under US Publication 52 which they follow as a rule, it’s when a shipment would be ORM-D (Limited Quantity) in the 48 contiguous United States, when it bound outside of this area it’s considered an International shipment and would be reclassified as a hazardous material shipment. In most cases we can shipped these items with our carriers. “If you’re an international customer and interested in this product, email your contact information and shipping address and I forward you a quote for S&H.” Department of Transportation Disclaimer (DOMESTIC) UPS Ground Service & (INTERNATIONAL) DHL & UPS Air Service Package will meet or exceed USPS Publication 52 guidelines set forth by eBay, which is not recognized by DOT unless you ship through the USPS. I’m required to meet Federal DOT 49 CFR 100-185, shipping and packaging procedures by Department of Transportation, that is designated for commerce. Will use every DOT exception allow to decrease the cost of shipping for my customers. USPS Publication 52, Hazardous, Restricted, and Perishable Mail Section (3) Hazardous Materials [Category 336 Small Quantity, Category 332 Limited Quantity (ORM-D), which shipped international are reclassified as a hazardous material shipment (HMS) with extra carrier handling fees. DOT (Domestic) IATA (Air) Not dangerous goods Not dangerous goods (UPS) Domestic Ground (DHL/UPS) IATA International Not applicable Not applicable Foreign Trade Commodity Code (HTS Code) 2912491000 They are certain cases for shipping rates may exceed rates listed, I will send you a carbon copy of DHL or UPS rate charge for your location where you may pay the extra fees, or you have the right to cancel order without any penalties within 12 hours of notice. Also, all international orders, when transporting goods across international borders, shipments are subject to duties and taxes as determined by customs in the destination country. The calculation of duties depends on the assessable value of a dutiable shipment. For this calculation, dutiable goods are given a classification code that is known as the HTS code and it’s up to the purchaser to pay these fees. Liability Disclaimer By ordering this item, you the purchaser agrees to all the terms and conditions of this disclaimer. All products sold on this site are for Research and Development purposes. You must be 21 years old or older to purchase. If you’re an international customer your responsible for any special permits or regulator forms before you order and to pay the duties and taxes. Buyer acknowledges that the research products have not been tested by Seller for safety and efficacy in food, drug, medical device, cosmetics. Seller makes no warranties of any kind, express or implied, that any products are fit for any purpose, then stated Grade or Purity. Buyer has the responsibility to verify the hazards and to conduct any further research necessary to learn the hazards involved in using research products purchased from Seller (see Safety Data Sheet’s (MSD’S). Buyer expressly represents and warrants to Seller that Buyer will properly handle any research products purchased from Seller in accordance with the practices of a reasonable person who is an expert in the field and in strict compliance with all applicable laws and regulations, now and hereinafter enacted.

Price: 49.23 USD

Location: Houston, Texas

End Time: 2024-10-26T18:35:55.000Z

Shipping Cost: N/A USD

Product Images

Sodium carboxymethyl cellulose, 99.5+%, high viscosity, BioReagent, 30g

Item Specifics

All returns accepted: ReturnsNotAccepted

Country/Region of Manufacture: United States

MPN: Lot CA194 2094KTCS

Model: high viscosity, BioReagent

Brand: GTI Laboratories Supplies

Recommended

Dicyandiamide, 99.9%, Certified® 30g
Dicyandiamide, 99.9%, Certified® 30g

$33.93

View Details
Tin, 99.995+%, granular 20-30 mesh, Ultra Reagent (ACS), 125g
Tin, 99.995+%, granular 20-30 mesh, Ultra Reagent (ACS), 125g

$119.50

View Details
Vanillin, 99.4%, Certified® 30g
Vanillin, 99.4%, Certified® 30g

$40.10

View Details
Acetanilide, 99+%, crystalline, for synthesis, certified, 30g
Acetanilide, 99+%, crystalline, for synthesis, certified, 30g

$37.86

View Details
Safranin O, 99%, Certified® for microscopy 10g
Safranin O, 99%, Certified® for microscopy 10g

$47.88

View Details
D-a-Tocopherol polyethylene glycol 1000 succinate, Certified® BioTech 10g
D-a-Tocopherol polyethylene glycol 1000 succinate, Certified® BioTech 10g

$137.03

View Details
Silicon, = 98.5%, = 1” pieces, Trace Metal Grade
Silicon, = 98.5%, = 1” pieces, Trace Metal Grade

$34.70

View Details
Glycerol polyglycidyl ether, = 98%, for synthesis, Organic®
Glycerol polyglycidyl ether, = 98%, for synthesis, Organic®

$47.25

View Details
Terephthalic acid, 98+%, for proteomics, 30g
Terephthalic acid, 98+%, for proteomics, 30g

$38.29

View Details
Aurintricarboxylic acid ammonium salt, 99.7%, Certified® ACS 10g
Aurintricarboxylic acid ammonium salt, 99.7%, Certified® ACS 10g

$40.79

View Details