Roland TD-27 PD-140DS CY-18DR VH-14D 4 sets V-Drums Digital Pad NEW

Description: Roland TD-27 PD-140DS CY-18DR VH-14D 4 sets V-Drums Digital Pad NEWDescription TD-27Number of drum kits: 100 (preset: 55)■ Number of tones: 728■ User samples Number of user samples: maximum 500 (including user samples at product shipment), sound length (total): 24 minutes in monaural, 12 minutes in stereo, file formats that can be imported: WAV (44.1kHz, 16/24 bit)Effects: Pad Compressor (for each pad), Pad Equalizer (for each pad), Overhead Mic Simulator, Room/Reverb, Multi Effects: 3 systems/30 types, Master Compressor, Master Equalizer■ Bluetooth compatible standard = Bluetooth standard Ver 4.2, compatible profile = A2DP (audio) GATT (MIDI over Bluetooth Low Energy), compatible codec = SBC (supports content protection by SCMS-T method)■ Song player (SD card): File format: WAV (44.1 kHz, 16/24 bit), MP3 * Audio files must be saved on the SD card.■ Recorder: Recording method = real time, maximum recording time = 60 minutes (temporary recording: 3 minutes)* An SD card is required for recording. If you don't have an SD card, you can temporarily record about 3 minutes, but you can't save it to the main unit.　File format = WAV (44.1 kHz, 16 bits)■ Display: Graphic LCD 256 x 80 dots ● External memory: SD card (SDHC compatible)■ Connection terminalTRIGGER INPUT jack x 1 (kick, snare, tom 1, tom 2, tom 3, hi-hat, crash 1, ride, ride bell, hi-hat control): 25-pin D-sub type * Exclusive use with pads that support digital connection .　TRIGGER IN terminal x 4 (Crash 2, AUX 1, AUX 2, AUX 3): TRS standard type　*Exclusive use with pads that support digital connection.　DIGITAL TRIGGER IN terminal x 3: USB A type, MASTER OUT terminal x 2 (L/MONO, R): standard type, DIRECT OUT terminal x 2: (MONO) standard type,　PHONES terminal x 1: stereo standard type, MIX IN terminal x 1: stereo standard type, MIDI terminal (IN, OUT/THRU), USB COMPUTER terminal x 1: USB B type,　FOOT SW terminal x 1: TRS standard type, DC IN terminal■ USB COMPUTER terminal speed = Hi-speed USB, driver mode = generic/vendor, compatible communication = USB-MIDI/USB-Audio* To use USB audio, it is necessary to change to vendor mode and use the vendor driver.■ USB audio sampling frequency (original) = 44.1 kHz, sampling frequency (using sampling rate converter) = 96 kHz, 48 kHz, recording = 28 channels, playback = 4 channels■Power supply: AC adapter (DC9V) ●Current consumption: 770mA　Accessories: Quick start (including warranty card), AC adapter, dedicated connection cable, user registration card, "Safety Precautions" leaflet, sound source mounting plate, thumbscrew (M5 x 10) x 2 * SD card Not included in the product.■ External dimensions: 238 (width) x 204 (depth) x 79 (height) mm　■ Mass (excluding AC adapter): 1.1kg PD-140DS● Pad size: 14 inches● Shell depth: 4.3 inches● Number of tensions: 8● Head: 3-ply mesh head (middle layer floating structure)● Corresponding playing method (trigger)Head shot (multi-step hitting position detection function, wide dynamic range)Rim shot (depth detection function, wide dynamic range)Cross stick (automatic switching)Brush sweep● Sensor systemMulti-element sensor systemHead sensorPosition sensor x 3Rim sensorCross stick sensor x 3Built-in sensing processor● Corresponding covering size98 (width) x 1,060 (length) mmThickness: 1 mm or less● Connection terminal: DIGITAL TRIGGER OUT terminal(Compatible with Roland drum sound sources equipped with the DIGITAL TRIGGER IN terminal)● Power supply: Supply from DIGITAL TRIGGER IN terminal (DC5V)● Current consumption: 90mA● External dimensionsWidth 380 mm x Depth 380 mm x Height 160 mmMass: 4.9 kg CY-18DR● Size: 18 inches● Corresponding playing method (trigger)Bow shot (multi-step hitting position detection function, wide dynamic range)Bell shot (wide dynamic range)Edge shot (wide dynamic range)Chalk playing method (edge choke, bow touch)● Sensor systemMulti-element sensor systemBow sensor x 3Bell sensorEdge sensorTouch sensorBuilt-in sensing processor● Connection terminal: DIGITAL TRIGGER OUT terminal(Compatible with Roland drum sound sources equipped with the DIGITAL TRIGGER IN terminal)● Power supply: Supply from DIGITAL TRIGGER IN terminal (DC5V)● Current consumption: 90mA● Sold separatelyCymbal mount (MDY series)Cymbal parts set (CYM-10, 1 set included with this machine)● External dimensionsWidth 470 mm x Depth 470 mm x Height 55 mmMass: 2.1 kg VH-14D ・ Size: 14 inches・ Corresponding playing method (trigger):Open / half open / closed / press (multi-stage open / close position detection)Bow shot (multi-stage hitting position detection, wide dynamic range)Edge shot (multi-step hitting position detection, wide dynamic range)Foot close / splashChalk playing method (edge choke, bow touch) ・ Sensor system:Multi-element sensor systemBow sensor x 3Edge sensorMotion sensor Touch sensorBuilt-in sensing processor ·Connecting terminal:DIGITAL TRIGGER OUT terminal(Compatible with Roland drum sound sources equipped with the DIGITAL TRIGGER IN terminal) ・ Power supply: Supply from DIGITAL TRIGGER IN terminal (DC5V)・ Current consumption: 90mA ・ External dimensions (width x depth x height): 356 x 356 x 160 mm-Mass (excluding clutch): 2.2 kgShippingWe will ship the item by FedEx, DHL, UPS, Japan Post (EMS/Airmail) and provide the tracking number. Shipping is only available to the address registered.Please note that any address not registered is not acceptable to ship. Shipping is possible from Monday to Friday.Saturdays, Sundays, and Japanese holidays are not available because the transportation company is closed.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.

Price: 2652.65 USD

Location: Hokkaido

End Time: 2024-08-08T03:11:44.000Z

Shipping Cost: 0 USD