Ripe3D Quad External GPU Graphics Card Stand for DIY Mining Rig, Multi GPU Stand

Description: Ripe3D Quad External GPU Stand.Now with Optional PSU StandThe stand is designed to upto hold 4 GPUs with adequate space between card to provide space for cooling. Each GPU is spaced with 80mm between each backplate.If the PSU Bracket Addon is selected then this allows a ATX PSU to be attached to the GPU Stand. An added benefit of this is that it allows the GPU and PSU stand combo to be stood up on its side, saving even more desk space.The stand come with Front Fan Mounting Points to be able to fit either 2x 120mm fans or 2x 140mm fans (Fans are not included) The base has fixing points for four standard PCI-e riser cards to further secure your GPU to the stand. (Screws are supplied for this) (See https://www.ebay.co.uk/itm/274814147688 for guaranteed fit) Stand has been tested with VER009S riser card, the stand should work with other riser varieties but no guarantee is given.The 120mm or 140mm fans can be attached using the standard screws that come with every new fan.The base has holes for fixing the stand in place, but this is not required. The hole pattern matches the hole spacing for 120 and 140mm pc case fans. Cards shown in photos are for reference only and are not included. Card Spacing To calculate how much free space there will be between your cards, find the thickness of your card and take that away from 80mm, what you have left will be your air gap between the cards. See my store for other GPUs stand setups including dual and single card setups. Includes 1 X Base 1 x Front 2 x Top Side Fan Brackets 1 x Center Top fan Bracket 27 x Screws for assembly, along with screws to secure a PCI riser card and to secure the Graphics Card.If PSU Bracket is included also included is;1 x PSU Front Bracket 1 x PSU Strap 3 x Screws for assembling stand (Does not include PSU Screws) Note: The following are NOT included GPU, PCI-e Riser, Fan and Screws for mounting the fan. AssemblyFix the Base and the Stand together using 3 screws on the bottom and 2 on the front. Note: if you want to secure the stand by screwing it down it is recommended to do this now.Attach your fans to the front of the stand only fixing at the bottom for now (Do not attach fan brackets yet.)Fix your PCI-e risers using Screws Provided. (Stand will still function without the brackets being fixed)Insert your graphics cards into the standWhen fixing the GPUs at the top of the stand ensure to attach the Fan brackets as per photos.Screw the top of the fans to your fan brackets.If you have selected the PSU Bracket Addon;Attach the PSU Front Bracket to the front of the Stand using two screws from the psu bracket in the the front part of the GPU Stand.Attach the PSU strap to the base of the GPU Stand using 1 screw from the Base in to the PSU strop.Proceed with the assembly instructions as above, The PSU can be fitted at any point.Additional colours may be available Message for more information. Any questions please do not hesitate to contact, including questions regarding International shipping.

Price: 22 GBP

Location: Southport

End Time: 2023-11-15T16:35:17.000Z

Shipping Cost: 22.12 GBP