Description: Normal 0 false false false EN-US ZH-CN X-NONE CO sensor bypass jumper. To be used for troubleshooting a Predator 3500 with the CO sensor. Check pictures to see the harness and sensor this jumper is made to bypass. May be compatible with other generator brands if they use the same sensor and harness setup. Designed and tested on a 2023 Predator 3500. This jumper is ONLY to be used by those who already posses mechanical/technical aptitude, proper tools, and is ONLY for testing. If your Predator 3500 has running issues, or you suspect a bad CO sensor, this will bypass that system so you can troubleshoot further. Once troubleshooting is finished, this adapter should be removed so as to continue compliance with CO sensor safety operation. Using this adapter will allow troubleshooting that does not void the warranty, as no wires are cut or damaged, and the CO sensor can be reconnected. The CO sensor is secured with (2) S2 T20 screws, which is a security Torx 20 bit. Using this bypass jumper allows the generator to run continuously without the CO sensor faulting out. This is NOT the manufacturer recommended way to operate the generator. It is unsafe if someone were to leave it inside a home or structure. The jumper is made using GXL automotive wire and is suitable for use in this application. By purchasing this jumper, you acknowledge: 1. This is only for testing. 2. May not be transferred, either as a part or installed into a generator, to another person/owner. 3. There will be no technical support. The manufacturer of your generator may make changes at any time, so newer or older or different brand generators may not work with this jumper. I only state that it works on a 2023 Predator 3500. 4. No refunds/returns.
Price: 16 USD
Location: Mukilteo, Washington
End Time: 2024-08-29T04:29:16.000Z
Shipping Cost: 4.63 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Model: Predator 3500
Country/Region of Manufacture: United States
Equipment Type: Adapter
