PostHugger™ 2Pc Clamshell Union Splice Bracket for 4x4’s or 6x6's

Description: PostHugger™ Connector Brackets for End-to-End Connection of 4x4 or 6x6 Posts and Beams! Two-Piece Clamshell Union Support Bracket either for 4x4’s or 6x6's! The 4x4 set is used to join two 4x4 posts (3.5” x 3.5”) end-to-end, and has a height of 13-3/4”. The 6x6 set is used to join two 6x6 posts (5.5" x 5.5") end-to- end and has a height of 17". You can place them so the holes line up and you can bolt through, or flip one over and all the holes are offset for use with lag screws. Build your own rugged and heavy duty PostHugger™ Pergola, Double Pergola, or deck and other DIY's with our RiverDriveDesigns, USA made, 1/8" thick, steel brackets! Also great for fixing/reinforcing the build you already have! These are not flimsy/bendable metal. We make them using 1/8" thick steel - a single corner bracket weighs just over 2 pounds - - strong enough to take what you throw at it, but not so heavy where they are hard to work with. We use 1/8″ steel which is thicker than a Quarter and a Dime stacked on top of each other. Also unlike others who just cut and ship steel right off their table, we take the time to hand debur and wire brush both the inside and outside of every piece. We are the original designer of the PostHugger™ brackets, which may be copied, but never equaled! :) If you find a PostHugger™ knockoff, give us a chance to meet or beat their price. Our brackets can be installed using any 1/2" wood lag screws or in instances where there will not be a collision of bolt holes, 1/2" thru bolts. If you use lag screws, we recommend 1/2" x at least 2" length for 4x4 posts and at least 2.5" length for 6x6 posts, with longer bolts adding more strength. If you choose to through-bolt in locations where possible, go at least 1/2" x 4.5" for 4x4 posts. BOLTS/LAG SCREWS ARE NOT INCLUDED WITH OUR BRACKETS; you can pick them up at your local hardware store when you pick up your wood. Please note that unless you choose the powder coated option, these ship as raw, unpainted steel. You can either paint them the color of your choice, finish them with a clear coat, or allow to achieve a natural rust patina over time. ***Powder Coated Brackets: If ordering brackets in the black powder coat, please allow an additional 1-2 days for shipping & delivery.*** Made in the USA: All our PostHugger™ Brackets & metal artwork products are Made in America with American-Made Steel! If you would like to see customer photos (and a video!) of some of our brackets in use, click the link https://posthugger.com/photos/(c) 2024 Thermo-Flex Technologies, Inc. - All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission.

Price: 52 USD

Location: Cartersville, Georgia

End Time: 2024-12-07T19:48:29.000Z

Shipping Cost: 0 USD