Planet Audio TQ10S 10” 1200 W Car Subwoofer

Description: EnclosureThe TQ10S is designed to work in a medium sized sealed or ported enclosure. Since the woofer has pole-vent, it needs a minimum clearance from the rear wall of the enclosure of 0.75” (19 mm). Below you will find the dimensions to make the enclosure to suit the subwoofers needs, it has been designed for maximum output while retaining great sound quality. The dimensions have already accounted for the volume displacement of the subwoofer, and using 3/4” (19mm) MDF. All dimensions are external.TORQUE TQ10SBreak Your Subwoofer InMuch like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.10 inch 1200 Watt Single Voice Coil SubwooferPower Handling (Peak): 1200 WattsCone: Brushed PaperSurround: FoamSensitivity (1 Watt/1 Meter): 87dBImpedance: Dual 4 OhmVoice Coil: 2 inch AluminumResonant Frequency 32 HzMounting Depth: 4.8"Cutout Diameter 9.1” (279 mm)Cone: Brushed PaperThe advantage of a paper cone is that it’s more rigid and is able to handle high power and functionality. You don’t want the cone of a subwoofer to have a flexible structure to it. The stiffer the cone is, the better sound quality you will receive.Surround: FoamUp until about 30 years ago, foam surrounds tended to deteriorate more quickly, but due to recent advancements, the average life span of standard foam surrounds is about 8 to 16 years. New foam formulas last much longer and are a superior product for speaker drivers that need a large excursion (how much the cone needs to move back and forth). Foam keeps the cone centered and yields a high excursion. Foam is self-damping (the ability to control undesirable movement of the speaker cone) and reduces its own standing waves. It is also very light and has a minimal effect on the motion of the cone. Foam can be mixed with other substances to produce different flex and strength properties.Voice Coil: AluminumOne of the most abundant elements on earth, Aluminum is remarkable for its low density and for its ability to resist corrosion. It is nonmagnetic (does not have any magnetic properties) and does not easily ignite. This solid material has the ability to perform under stress in both high tension and high compression environments. Aluminum is relatively soft making one of the more ideal materials to use in voice coils.Basket: StampedHere are a couple of advantages of die-casting over stamping speaker frames. One of the more noticeable differences is the fact that a die-cast frame has better Resonant Frequencies. This means that the frame is able to absorb and transfer much of the energy produced by the speaker. It doesn’t vibrate like a bell would when it is stricken. Another advantage is that a die-cast frame is more durable and harder to damage or break. Other advantages are high dimensional stability for complex shapes, good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures.

Price: 44.99 USD

Location: Oxnard, California

End Time: 2024-07-25T22:00:10.000Z

Shipping Cost: 0 USD