Description: Here is one of my favorite turntables out there. Its a Pioneer PL 560 turntable. What I did to it was first off , had my local plastic shop make me a new cover. I also made a new base out of MDF, put American Black Walnut Veneer on top. Dont really care much for the partical board base that was the original. I replaced the tonearm rest, added new solid rubber feet and vibra pods under the feet. Cleaned all the controls and centered the pitch control. Replace the rubber mat. Added damping fluid to the lift. Adjust the tonearm pickup and return. Also added new pad to the tonearm return. Table work 100% as it should. Its also not light. its 21 lbs and is 17 3/8 wide, x 15 deep, x 6 3/8 tall with the vibrapods and 5 3/4 without them. Has a 45 adaptor. It will be very well packed and box. I am not letting anyone destroy this in shipping. I also over pack, hence the price of the size of the box. Its oversized. Also because its over 500, you will need to sign for it per ebay and fed ex. The Strobe system on this, there are 2, In quartz lock, the strobe platter lights up, when taken out of quartz lock so you can adjust the pitch, the platter light turns off and the VU meter lights up. This table as stated is a quartz lock, 2 speed, 33 and 45, fully automatic, or semi automatic with pickup at the end of the record, or you can put it in manual mode. I also replaced the RCA ends. I also created the logo on the top right and its imbedded in the finish so you cant rub it off. The cartridge is somewhat of a starter cartridge. Its a Audio Technica AT 3600. I use this so you know it works and tracking it at 1 1/2 grams. You can put what ever cartridge you want on it if you want a higher end cartridge. Please ask questions if any before you buy, Know what this is and can do before. There is a mark on the metal plate on top. Its by the lower left of the vu meter. There are a couple of different angles to show it. thanks A bit about me. Not only have I been doing wood working for the past 20 years, and have a complete wood shop will all the major equipment. But I went to school for electronics back in 83 and got a diploma in it and that is what my normal 8 – 5 job is, and have also a personal complete electronics shop with all the test equipment. I am not someone that picked up a soldering iron one day on eBay or read the internet and all of a sudden I am an expert. Its also not what my dad did but what I do. Not living off someone else's credit but It’s what I do for a living. I have been to schools for all the major brands and authorized for most right now.
Price: 1500 USD
Location: Loveland, Colorado
End Time: 2024-12-31T04:09:03.000Z
Shipping Cost: 10 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Pioneer
