Phabrix SxD Portable 3G/HD/SD-SDI Generator/Analyzer/Monitor

Description: Description:This is a listing for a Phabrix SxD Portable 3G/HD/SD-SDI Generator/Analyzer/MonitorDC Voltage Requirements: 5Functional Condition:The item: is guaranteed to be fully functionalTests performed: The unit was tested using an inhouse dc power supply. The unit powers on without error. The unit outputs signal on SDI 1 and inputs signal on SDI port 1/2.Cosmetic Condition:Item is in good used condition.Item has the following cosmetic issues: the SDI output 1 port is damaged. No impact to functionalityItems Included:Phabrix SxD Portable 3G/HD/SD-SDI Generator/Analyzer/MonitorItems Not Included:Power Adapter SxD is a dual-link 3G/HD/SD-SDI version of the SxA which is designed for video technology manufacturing and production applications. It has two SDI inputs, two SDI outputs and no AES input or outputs. It offers support of multiple advanced video standards up to a combined maximum data rate of 3Gbits across the two SDI links, including 422/444, YUV/RGB, 10/12 bit and SMPTE 428-9 D-Cinema/SMPTE ST 2048-2:2011 formats.Dual SDI input/output analysisUltra-portable, rugged designEasy, fast operationAV Delay Generation & AnalysisProduct Features:Ultra-portable, easy to use designHigh quality, 16:9 built-in screen for video monitoringRechargeable lithium battery delivers 1-2 hours operation and mains power also availableSuperior ease of use with color coded GUILightweight at 0.9kgRugged aluminium case for demanding broadcast environmentsDual-link 3G/HD/SD-SDI designed for video technology manufacturing and production applicationsGeneratorVideo GeneratorCreate video test signals for all supported SD and HD SDI output standards including 3GHz standards at 1080p/50/59/60 Y, Cb, CrAdvanced video formats include support for RGB, XYZ 12bit and 2K formatsFully programmable Y Zone PlateAudio GeneratorEmbed audio signal on all 16 embedded audio outputsAudio Group menu controls which audio channels are present, signal type and amplitudeChoice of: silence, adjustable tone, noise, AV Delay, Dolby test stream or AES inputReferenceCreate video test signals that are either free-running or locked to studio reference or input signalGenlock menu is used to select locking reference and provides control for genlock phase offset in lines and pixelsAnalyzerPicture MonitorPicture is displayed in window adown-converted displayCursor may be turned ON over area of picture specified by specific line and sampleMonitor device input or outputPicture ZoomZoom function provides 1:1 unfiltered pixel view, centred on position of picture cursorHANC/VANC areas visible when cursor in blankingLinked CursorsPicture cursor is linked to waveform, vectorscope and data views for rapid and accurate detailed measurement of signalWaveform Full FrameDisplays selected analyzer or generator sourceYCbCr GBR, Y, Cb, Cr, R, G, B modesCursors may be displayed over the waveform to allow measurement of time or amplitude valuesVertical and horizontal magnificationsWaveform Line SelectDisplay may be restricted to single line or all lines may be displayed simultaneouslySingle line display is linked to picture, vectorscope and data viewVectorscopeChoice of 100% or 75% graticulesDisplay Composite, SDI, SFP video input or generator test patternDisplay specific video line linked to picture cursor1, x2, x5 or x10 magnifications with position to centre, cyan, yellow, green, magenta, red, blue graticule locationsControlScreen GrabScreen grabs can be saved and downloaded via web browser or FTP transferWeb BrowserView and control instrument display over TCP/IP interface with standard browserIdeal for remote location checking, engineering support, and fault analysisAllows access to key functions including screen dumps, loudness files and logging filesPC SimulatorFree simulator PC application is available for downloadIndicates command IDs for automation programmingAudio16 Channel Audio MetersDisplay up to 16 audio channelsSource for each block of 8 meters may be independently set to allow metering of embedded audio inputs or outputsCurrent audio level in dBFs (decibels relative to 0dB full-scale) is displayed at bottom of each meterAES/Analog Audio MetersDolby E metering selectionAudio Channel StatusAudio Status menu shows the Channel Status for selected audio channelDisplayed in decoded form as well as raw hexadecimal data dumpSource may either come from input signal or from generator output for rapid comparison purposesSystemInstrument PresetsCurrent instrument settings can be saved as memories for future recallMemories can be exported to single files, reimported or copied to other unitsPresets can be applied to whole instrument or selectively within Generator or AnalyzerNetwork ConfigurationNetwork menu allows instrument to be configured as part of networkSupport for automatic acquisition of network parameters via DHCP or manual configurationRemote control enable/disable and selection of port numberSoftware StatusSerial number, instrument MAC address, version information and battery state listedDate and time can be set and factory default settings recalledDisplay of loaded license optionsLCD brightness and screen saver configurationsEngineer SetupManage instrument's settings including user access, clearing memories, factory default reset, software upgrades and audio calibrationSDI input to SDI output loop through modeUtilsDetails of the unit's operating statusDetails the temperature and individual board voltagesLists any hardware errors that have been recordedSignalVideo TimingDisplay relationship between selected video input with respect to external reference inputOffset feature to simplify system timing measurementsVideo StatusDisplay the status of the selected video input or output and any errors that have been found in data streamDisplay of EDH, Active Picture and CRC data with cumulative run-time display of errors and error rateDisplay of estimated cable length for SDI inputs with selectable cable typeANC StatusShows which ANC packets are present on SDI input and whether any errors have been detectedEach field is color coded according to whether ANC packet is present (White), missing (Grey), has errors (Red), or has previously had errors (yellow)Video Format/Payload IDMisc Status menu displays status of SMPTE 352 packets embedded in selected video input and displays any errors that have been foundSelection of input or output for rapid comparisonDisplay of raw data and decoded formLoggingLog SetupSet Audio Thresholds and log specific video status events, including Output, Reference and Input Status, TRS Errors, Picture CRCEvent Log DisplayEvent Log menu displays list of events with time stamp showing when they occurredANC Log SetupLog ANC Status menu allows customization of which ANC packets to log for changes in status (e.g. Present, Checksum Error, Missing, Parity Error)Logging of Dolby and AES Status as well as device system errorsControl of logging durationCompany wide policy: All items are subject to 3% restocking fee if buyer returns, changes mind, or purchases item by accident. The 3% restocking fee WILL NOT be assessed if item is defective or not received as described.

Price: 3500 USD

Location: Irvine, California

End Time: 2024-09-30T05:10:26.000Z

Shipping Cost: 69.99 USD