Description: This listing is for a brand new Nema 23 300oz (18.75in/lbs) in stepper motor rated at 3.5A, 1/8 degree, 8mm dual shaft using 4 leads. These motors are ideal for softer substrates like woods, carbon fiber, and plastics If your looking for larger motors I offer 600oz steppers as well in my store. They are designed in house for optimal performance with the G540.Motor wiring schematic for the Gecko is listed in the pictures above with polarities. These motors feature double (8mm) shafts with flats machined into them for the most durability, and compatibility on the market for retorfits *Due to high demand these units can take up to 10 days to have stock replenished in the event there sold out. Full Specs Are below: Step angle 1.8° Current (A) 3.5 Resistance (Ohms) 1.2 Inductance per phase (mH) 2.4 L0 Dimension (mm) Refer To Pictures L1 Dimension (mm) Refer To Pictures Holding Torque(N.cm) (Oz In.) 300 Oz. In. Control Wires 4 Insulation Resistant 100 MOhm Min 500V DC Insulation Strength 50Hz 1Minute 500V Min Ambient Temperature -20°C~+50°C Temperature Rise 110°C Max. These motors are very powerful considering there torque rating, and provide more than enough holding torque for light to medium grade CNC's. These can also be used in robotics, and many other applications requiring a great deal of torque with 3.5A. These motors also feature 2.4 inductance rating so they hold their torque much better at higher IPM Speeds. I encourage you to check my store to compliment these motors with a Gecko G540, shielded motor cables, and power supplies. I will offer the lowest combo pricing online period. International shipping welcome with adjusted shipping price. Please message me prior to purchasing for an accurate shipping quote. *If you need more than one please refer to the shipping cost after the first one is purchased. These motors weigh in at over 2lbs. each*
Price: 39 USD
Location: Spring Hill, Florida
End Time: 2024-08-21T22:40:51.000Z
Shipping Cost: 10.75 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Full Load Amps: 3.5
Rated Current per Phase: 3.5
MPN: 300oz in Stepper
Full Step Angle: 1.8° (200 Steps)
Shaft Type: Solid Shaft
Nominal Rated Input Voltage: 24v-48v
Model: Nema 23 300oz/in
Resistance per Phase: .6
Wiring Configuration: 4-Wire Bipolar
Current Type: DC
Shaft Diameter: 8mm
Brand: eDealers Direct
Holding Torque: 300oz/in
