NAD C368 Integrated Amplifier BLUOS-2i MDC DAC Streaming C-368 80 Watts @8 Ohms

Description: This ships in the Original Box, the remote is missing. This is a highly versatile and powerful audiophile solution. The C368 for sale comes with the optional BluOS2i MDC adapter which is a $449 card that fits into the MDC slot in the back. It's factory installed already. This amp has 80W per channel into 8 ohms or 120W with Dynamic Power into 8 ohms or 200W into 4 ohm. All NAD amplifiers are conservatively rated. We opened and tried it with 2 sets of speakers at the same time (Triangle Bro3s and Klipsch Tower) and it has no fatigue running 4 speakers at the same time at high volume. For more power, this can be bridged with a C298 power amp using the bridge mode and you will double the power to 160W in 8 Ohms with 240 Watts Dynamic Power. This is extremely user friendly to set up and you can immediately connect to your iPhone, iPad, to stream to Spotify, Tidal, Apple Music, etc. It comes with a phone stage for Moving Magnet cartridges and 2 TosLink Optical connections as well as a SubWoofer output. While there is no HDMI Arc, we tried connecting to a TV with Optical cable and connected a subwoofer to it for a 5 speaker (4.1 set up) and it works great. We also tested the DAC with a AudioLab Transport and the CD reproduction is stellar lots of definition and brightness and clear soundstage and upper/mid/bass separation so the DAC included is very good. We also tried the phone stage with a Pro-Ject Debut Carbon that had a $600 Sumiko Amethyst cartridge and it sounded great. I'm not a vinyl aficionado. We will pay for the extra shipping cost to have signature confirmation for the delivery so your parcel will not be left on an unattended porch or front door. Key Features80W x 2 Continuous power into 8 or 4 OhmsBluetooth A2DP with aptX supportedMM Phono inputAnalogue line inputsSPDIF coax and optical inputsSpeaker A, Speaker BStereo or Bridge mode configurationPreamp/Subwoofer outHeadphone amplifierMDC Slots for future upgradesIR RemoteSmartphone Control App12V Trigger in/outIR in/outRS-232 Serial port for controlControl4, Crestron, RTI, URC, AMX, Savant, Elan certifiedPreamplifierLine Input, Pre OutTHD (20Hz-20kHz)<0.005% at 2V outSignal/Noise Ratio>106dB (IHF; A-weighted, ref. 500mV out, unity gain)Channel Separation>80dB (1kHz); >70dB (10kHz)Input Impedance (R and C)22 kilohm + 100pFMaximum Input Signal>4.5Vrms (ref. 0.1% THD)Output ImpedanceSource Z + 240 OhmInput Sensitivity93mV (ref. 500mV out, Volume maximum)Frequency Response±0.03dB (20Hz-20kHz)Maximum voltage output – IHF load>4.5V (ref. 0.1% THD)Tone ControlsTreble: ±7.0dB at 20kHz Bass: ±7.0dB at 60Hz Balance: -10dBPhono Input, Pre OutTHD (20Hz-20kHz)<0.01% at 2V outSignal to Noise Ratio>84dB (200 Ohm source; A-weighted, ref. 500mV out) >76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out)Input Sensitivity1.44mV (ref. 500mV out, Volume maximum)Frequency Response±0.3dB (20Hz-20kHz)Maximum Input Signal at 1kHz>80mVrms (ref. 0.1% THD)Line Input, Headphone OutTHD (20Hz-20kHz)<0.005% at 1V outSignal/Noise Ratio>110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain)Frequency Response±0.3dB (20Hz-20kHz)Channel Separation>60dB at 1kHzOutput Impedance6 OhmsGeneral SpecificationsContinuous Output Power into 4 Ohms and 8 Ohms (Stereo)>80W (ref. 20-20kHz at rated THD, both channels driven)Continuous Output Power into 8 Ohms (Bridge Mode)300W (at 20-20kHz at THD 0.03%)THD (20Hz-20kHz)<0.03% (250mW to 80W, 8 Ohms and 4 Ohms)Signal to Noise Ratio>98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)Clipping Power>95W (at 1kHz 0.1% THD)Clipping Power (Bridge Mode)>315W (at 1kHz 0.1% THD)IHF Dynamic Power8 Ohms 120W 4 Ohms 200W 2 Ohms 250WIHF Dynamic Power (Bridge Mode)8 Ohms 500W 4 Ohms 560WPeak Output Current>20A (in 1 Ohm, 1ms)Damping Factor>300 (ref. 8 Ohms, 20Hz and 6.5kHz)Frequency Response±0.3dB (20Hz-20kHz)Channel Separation>75dB (1kHz) >70dB (10kHz)Input Sensitivity (for 80W in 8 Ohms)Line In: 470mV; Digital In: 21% FSSample Rateup to 24 bit/192kHzFrequency Band2.402G-2.480GMaximum Transmit Power (dBm)7dBm ±2dBmPower Consumptionat Auto Standby ON and Network Standby OFF0.5 Watts*at Auto Standby ON and Network Standby ON1.2 Watts**OFF mode (Power switched OFF)0.1 Watts * – After 20 minutes of no user interface interaction and no active source input ** – With established wireless Bluetooth connectivity and 20 minutes of no user interface interaction and no active source input NOTE: Bluetooth connectivity is always live when configuredWeight & DimensionsGross Dimensions (W x H x D)*435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)”Net Weight7.8kg (17.2lb)Shipping Weight10.1kg (22.3lb)

Price: 899.95 USD

Location: Lake Oswego, Oregon

End Time: 2024-09-25T07:50:47.000Z

Shipping Cost: 59.95 USD