Description: ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR, WITHOUT COMPROMISING ON COMFORT LuxHeat's wide range of 120v and 240v loose-lay cables offers the ultimate in design flexibility, allowing for custom configurations and easy installations BEST SUITED FOR: ★ Residential, Office apartments and Senior living facilities ★ Installs under tile, stone, marble, laminate and engineered wood floors ★ Primary or secondary heat source, it doesn't have to be below Zero to enjoy a warm floor HEATING CABLE FEATURES: ✔ Double insulated, single cold lead ✔ UL listed for USA, classified as safe for wet Locations ✔ 12watts/sqft @ 3" spacing provides optimal heat distribution ✔ Ultra low EMF - Dual conductor Tech, Alu foil sheath and ground wire ✔ Heater wire is less than 1/8” thick, ensures minimal effect on finished floor height ✔ ETFE insulated and covered by tough outer jacket, providing protection against abrasion and corrosion ✔ 25 Year limited warranty, provides peace of mind and an assurance of performance for many years to come THERMOSTAT FEATURES: ✔240 volt ✔ c UL us Listed ✔ GFCI Class A 5mA ✔ Dual sensing (Air & Floor) ✔ Load: 15amps (1800w @ 120v) ✔ Modern, Sleek design to compliment any room in your home ✔ Keeping it simple with OJ's Non-Programmable thermostat, no programming complications Alarm Includes: 2 x AAA BENEFITS:✔ Recommended by health professionals for allergy sufferers✔ Safe for children, elderly and pets - No hot, exposed or moving parts✔ Accurate and intelligent control ensures your personal comfort and affordability✔ Completely out of sight, no unattractive plug-in heaters, no storage hassles, no maintenance and no smellWATT DENSITY:★ 14.00w/sqft @ 2.6"★ 12.00w/sqft @ 3"★ 9.00w/sqft @ 4" About Us Prolux Materials LLC is a family owned, American business, focused on delivering quality products throughout the USA. With production and distribution facilities in both Kentucky and Tennessee, we find ourselves well positioned to meet all logistical demands. Our Flagship Floor Heating brand, LuxHeat, coupled with OJ Microline’s range of intuitive, energy efficient thermostats, offers the ultimate in Luxury and Comfort, Reliability and Affordability. Suitable for Most Floor Coverings BATHROOM IDEALLY SUITED FOR TILES Includes porcelain, ceramic, marble and more. Safe for wet areas, including showers. Important: Elements MUST be Embedded in Thinset, leveling or self-leveling compound. BEDROOM LAMINATE FLOORING We recommend Installing a Floor sensor to limit floor temperature and protect flooring. Important: Elements Must be Embedded in Thinset, leveling or self-leveling compound KITCHEN VINYL FLOORING (LVT) We recommend Installing a Floor sensor to limit floor temperature and protect flooring. Important: Elements MUST be Embedded in Thinset, leveling or self-leveling compound. LIVING ROOM HARDWOOD FLOORING Includes Engineered and Solid wood. We recommend Installing a Floor sensor to limit floor temperature and protect flooring. Important: Elements MUST be Embedded in Thinset, leveling or self-leveling compound. Intelligent Heating Systems If it wasn’t for the cozy warm feeling in the room, you would never know it had been fitted. Unlike conventional heaters that warm one particular spot, LuxHeat radiant floor heating evenly distributes warmth throughout the floor and up into the room, leaving no uncomfortable cold spots. The heat is directed where it is most pleasing – the feet – leaving the air we breathe slightly cooler. In fact, the air surrounding our bodies remains slightly cooler than our bodies, preventing that ‘’stuffy’’ feeling so often experienced in a room that is heated by forced air.3”Cables can be installed in any shape or pattern, to suit your floor layout.Uniform ohms resistance, ensuring even temperatures underfoot.Safe for wet areas, including showers.Radiant heat does not dry out the air, circulate dust or aggravate allergies.No hot, exposed or moving parts, no maintenance and no fan noise.Out of sight, no unattractive plug-in heaters or radiators.No summertime storage hassles. Optimal Comfort, Easy Control and Contemporary design The modern thermostat provides so much more than simple temperature control - it is a personalized and intuitive device designed to give a greater degree of control and comfort in the hands of the user. The OJ Microline UTN4-4999 Non-Programmable Thermostat with built-in GFCI is the ideal controller for those looking to keep it simple. No Programming or set up time required, simply select desired temperature and enjoy the warmth. Designed and manufactured by OJ Electronics – Denmark.Modern, Sleek design to compliment any room in your homeDual sensors (Air and Floor) with floor limiting feature.Built-in Class A GFCI (Ground Fault Circuit Interrupter).Keeping it Simple - intuitive, no manual needed.Child lock - prevents tampering.Tracks power consumption. PROVA FLEX-HEAT – Tile Underlayment Enjoy a warm floor while extending the life of your floor covering. PROVA FLEX-HEAT is an uncoupling and crack isolation membrane with channels for inserting multiple sizes of low-voltage heating cables. The underlayment consists of a polypropylene sheet with studs for carrying heating cables, channels for managing vapor, and a polypropylene non-woven anchoring fleece for securing the membrane to the substrate. The fleece layer is secured with a polyolefin-based adhesive, and it provides Shear Stress Control by neutralizing stress caused by substrate movement. Features:Can be used with multiple wire sizes of up to 0.2” (5 mm) thick.Achieve 3" (7.6 cm) Cable Spacing: Provides most efficient heat distribution as per wire manufacturer specifications0.26" (6.5 mm) thick membrane: Can be used without heating cables for matching up to higher floors to achieve a level transitionVapor Management System: Open-air channels beneath the fleece layer provides a path for moisture to dissipate.Achieved an EXTRA HEAVY Performance Rating When Tested to ASTM C627 Membrane systems combine the flexibility of a loose-lay LuxHeat heating cable with the ease of installation of a mat system. PROVA FLEX-HEAT can be used for interior residential and commercial tile applications on cement slabs and wood substrates. Suitable OSB (exterior glue only) substrates for ceramic tile installations include the following: • 16” o.c. joist spacing, minimum subfloor thickness: 5/8” • 19.2” o.c. joist spacing, minimum subfloor thickness: 3/4” • 24” o.c. joist spacing, minimum subfloor thickness: double layer 3/4” + 3/8”Stud Height: 0.237” (6 mm)Stud Spacing: 1” centers (25 mm)Nominal Construction Height: 0.26” (6.5 mm)Cable Spacing: 3” (7.6 cm) This Kit Includes LuxHeat Floor Heating Cable LuxHeat cables can be installed as a primary or secondary heat source, it doesn't have to be below Zero to enjoy a warm floor. Our wide range of loose-lay/ free-form underfloor heating cables offer the ultimate in design flexibility, allowing for custom configurations and easy installations. Be sure to calculate the correct floor area as heating cables CANNOT be cut or shortened. Heating wires MUST be embedded in a Self-leveling underlayment or Thinset.Elements are ETFE insulated and covered by a tough outer jacket, providing the ultimate dialectic and mechanical strength.Dual wire technology with aluminium shield minimizes electromagnetic fields (EMF).Heater wire is less than 5/32" thick, ensuring minimal effect to finished floor height.LuxHeat cables provide optimal heat distribution at 12 watts/sqft (3” spacing).Voltage: 120v. UTN4-4999 Programmable Thermostat + Floor Sensor The UTN4 thermostat can be configured to control Floor Temperature, Room Temperature, or Room Temperature with Floor Temperature Limiting - providing optimal comfort levels while ensuring floor coverings do not exceed recommended temperatures. Thermostat box Includes 15ft Floor Sensor. The UTN4 offers all the necessary functions to ensure easy installation and temperature control, for every floor type. For optimal comfort and to reduce running costs, we recommend installing the floor sensor and using the thermostats default ‘Dual Sensor’ setting.For accurate floor temperature control, install (NTC 10 k ohm) Floor Sensor between the heating wires.Ambient Temp Range +32 to +104°F (0 to +40°C).Floor limit range: +41 to +104°F (+5 to +40°C).Dimensions: H4.8” x W3” x D1”.Thermostat load: 15Amps (1800w@120v).Built-in Class A GFCIVoltage: 120v. LuxHeat Monitor The LuxHeat Monitor is designed to measure the heating cable’s continuity during installation. If the heating cable is cut or damaged during installation the Monitor will immediately alert the installer by means of a loud alarm and red flashing light. We still recommend an ohms test is carried out before, during and after installation. If the alarm sounds we suggest contacting a professional to identify the damaged area and make the repair.Early warning system, avoiding costly repairs in the future.Connects directly to the heater - Live, Neutral and Earth.Provides peace-of-mind during installation.Offers real-time continuity monitoring.Includes loud alarm and flashing light.Works with all floor heating systems.Includes 2xAAA batteries. Prova Flex-Heat Membrane PROVA FLEX-HEAT is a lightweight uncoupling membrane with heating cable capabilities. The membrane features deep grooves with locking channels that are suitable for multiple thicknesses of heating cables. Patented Shear Stress Control system with non-woven anchoring fleece neutralizes stress caused by movement in the substrate.Chemical Resistances: Non-rotting and resistant to most chemicals it could be exposed to during normal building constructions.Installation Temperature: 41°F to 104°F (5°C to 40°C): This is limited to the tile adhesive specification.Thermal Resistance: 3.4 h·ft2·°F/Btu in. (≤0.6 m2·°C/W)Working Temperature: 14°F to 140°F (-10°C to 60°C)Roll width: 3.28ft Listing and template services provided by inkFrog
Price: 309 USD
Location: Maryville, Tennessee
End Time: 2024-03-01T16:29:16.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: LuxHeat
Mounting Location: Thermostat: Install in wall box, Heating Cable: Installs under floor covering
Heating System: Electric Radiant Floor Heating - Indoor
Power Source: Electric (AC)
Voltage: 120V
Type: Electric Radiant Floor Heating for under Tile, Vinyl and more
MPN: L1-H1-C5-1-120V
Model: LuxHeat 120v Cable with UTN4-4999 Non-Programmable Thermostat
Timer Control: Digital - Air/Floor sensing Thermostat
Number of Heat Settings: Variable
Items Included: Thermostat, Floor Sensor, Installation Monitor, Heating Cable, Prova Flex-Heat Membrane
Control Style: Push Button
Features: 25 Year limited warranty, UL Listed for USA - classified as safe for wet locations, Dual sensing (Air & Floor), Built-in GFCI Class A 5mA, Installs under Tile, Stone, Marble, Laminate, Engineered wood
Temperature: Thermostat - Floor range: +41 to +104°F. Amb range: +32 to +104°
Country/Region of Manufacture: Denmark
Area Covered: Options Include: 10sqft - 150sqft
Power: Options Include: 120Watt - 1800watt
Current Rating: Ranges from 2amp - 15amps
Manufacturer Warranty: Cable: 25 Year limited warranty. Thermostat: 3 Year Factory
Available Variations
Color: 10 sqft - 120 Volts
Price: 309 USD
Available Quantity: 4
Quantity Sold: 0
Color: 15 sqft - 120 Volts
Price: 344 USD
Available Quantity: 4
Quantity Sold: 0
Color: 20 sqft - 120 Volts
Price: 374 USD
Available Quantity: 4
Quantity Sold: 0
Color: 25 sqft - 120 Volts
Price: 414 USD
Available Quantity: 4
Quantity Sold: 0
Color: 30 sqft - 120 Volts
Price: 449 USD
Available Quantity: 4
Quantity Sold: 0
Color: 35 sqft - 120 Volts
Price: 484 USD
Available Quantity: 4
Quantity Sold: 0
Color: 40 sqft - 120 Volts
Price: 524 USD
Available Quantity: 4
Quantity Sold: 0
Color: 45 sqft - 120 Volts
Price: 564 USD
Available Quantity: 4
Quantity Sold: 0
Color: 50 sqft - 120 Volts
Price: 614 USD
Available Quantity: 4
Quantity Sold: 0
Color: 60 sqft - 120 Volts
Price: 674 USD
Available Quantity: 4
Quantity Sold: 0
Color: 70 sqft - 120 Volts
Price: 714 USD
Available Quantity: 4
Quantity Sold: 0
Color: 80 sqft - 120 Volts
Price: 759 USD
Available Quantity: 5
Quantity Sold: 1
Color: 90 sqft - 120 Volts
Price: 829 USD
Available Quantity: 4
Quantity Sold: 0
Color: 100 sqft - 120 Volts
Price: 874 USD
Available Quantity: 4
Quantity Sold: 0
Color: 110 sqft - 120 Volts
Price: 934 USD
Available Quantity: 3
Quantity Sold: 0
Color: 120 sqft - 120 Volts
Price: 994 USD
Available Quantity: 3
Quantity Sold: 0
Color: 130 sqft - 120 Volts
Price: 1054 USD
Available Quantity: 3
Quantity Sold: 0
Color: 140 sqft - 120 Volts
Price: 1114 USD
Available Quantity: 3
Quantity Sold: 0
Color: 150 sqft - 120 Volts
Price: 1164 USD
Available Quantity: 3
Quantity Sold: 0
