JEYI Visual Smart M.2 Nvme / SATA SSD Enclosure USB 3.2 Gen 2 10Gbps External

Description: New Upgrade Function 1. 3 clicks to reconnect the drive (no need to disconnect the cable) 2. 5 clicks to turn on write protection (exit requires unplugging the cable again) 3. Multi-color LEDs JEYI i9X Display Visual Dual M.2 Protocol SSD Enclosure JEYI i9X display visual Dual M.2 protocol SSD enclosure Built-in RTL9210B dual protocol 10G high-speed master control theoretical read/write speed up to 1000M. Support both NVMe protocol and SATA protocol. Supports TRIM, ASPM, UASP acceleration, and sleep mode Plug-and-play, allowing data transmission across multiple devices such as desktops, laptops, cell phones, tablets, cameras, etc. at high speed across platforms and scenes Compact body with good feel Length only 103mm Width only 32.5mm Thickness only 11.5mm Multi-fin on all sides to support heat dissipation, so that the disk is always running at normal temperature, and always take care of the disk. JEYI insists on using the high cost superconducting thermal conductivity pad and all-aluminum heat dissipation method to prevent the disk from being "baked" in the enclosure and reducing the life of the disk. JEYI i9X can read and write for a long time with high intensity, which is suitable for professional-level uninterrupted applications. Can run Win To Go, VmWare virtual machine for a long time, large games, large 8K RAW video editing and other high-intensity professional applications It Can Also Display Conncecting USB 2.0 - 5 seconds Orange Conncecting USB 3.0 5G - 5 seconds Green Conncecting USB 3.2 10G - 5 seconds Purple Write-protected - remains in a static blue state Reading - the light flashes rapidly in succession Sleep Mode - multi-color breathing light effect After Safe Ejection - in stand by mode - breathing light effect for "USB 2.0 Orange" "USB3.0 Blue" "USB3.1 Purple" 1G File Transfer in 1 Second NVMe enclosure adopts USB 3.1 Gen 2 transfer speed up to 10Gbps NOTE: SATA SSD ONLY SUPPORT 6Gbps (600Mb/s Max) How to set write protection Enter write protect: touch the screen 5 times, then re-plug the cable to enter protect mode (red light to long blue) Exit write protect: touch the screen 5 times, then re-plug the cable exit protect mode (long blue light to red light) Note: Write protection with memory function, so as long as you dont exit the write protect function, it will remain in protected mode Reconnect the drive without re-plug cable JEYI exclusive patent: When you exit the drive, you dont need to unplug the cable, just click the screen 3 times to reconnect the drive. 1 minutes into sleep mode to save energy If the SSD case goes into sleep mode, you need to do a read action on the drive to exit sleep mode. Note: Sleep time can be modified by firmware Efficient Cooling Design All-aluminum body with multiple grooves to effectively increase the cooling effect Support Both NVMe and SATA SSD Supports both M.2 NVMe (M-Key,B&M-Key) and M.2 SATA(B&M-Key) RTL9210B Dual M.2 Protocols The RTL9210B-CG is a USB bridge that combines a USB device with both a PCI Express (PCle) controller and a SATA controller Supports TRIM, ASPM, UASP Acceleration, and Sleep Mode Full Aluminum Case Keeps your SSD cool with thermal compound pads Two Cables Inside (Gift) 1pcs TYPE C To C USB 3.2 Gen2 Cable 1Pcs TYPE A To C USB 3.2 Gen2 Cabl Package Contents 1pc NVMe/SATA SSD Enclosure 1Pc Screwdriver 1Pc C to C Cable 1Pc A to C Cable 10Pcs Thernal Pads

Price: 45.89 USD

Location: Shenzhen

End Time: 2024-02-25T15:56:18.000Z

Shipping Cost: 0 USD