Description: SILVER SOLDER WIRES AND HANDY FLUX3 GRADES OF SOLDER WIRE 20GAEASY - MEDIUM - HARD FLOW GRADES7oz Handy Flux & 12" SOLDER WIRE of EACH GRADELead, Cadmium & Indium FREE 🟢 Soldering brazing all purpose, low temperature flux Handy® Flux is a long lasting white paste type, very durable won’t break down from prolonged heat, an all-purpose flux for use in brazing and soldering Gold, Silver, Brass, Copper and other Non-Ferrous Metals. 🟢 Handy Flux is an active fluoride/borate-type flux which is appropriate for all nonferrous metals and begins to melt and dissolve oxides at 600°F, having an effective temperature range from1100° F-1600° F. 🟢 Paste formula can be cleaned up with hot water.🟢 Prior to soldering make sure joints and the solder are clean, flux the full surface area to prevent oxidation and allow for good solder flow, and a good brazed joint.🟢 Soldering Note: Clean - Surface and Joint is important and not too much Solder, good even heat over entire joint area. Clean remove oxides and other soldering residues prior to finishing.🟢 Silver Solder Wire used in Jewelry Making, Repair work such as sizing and mounting, for assembling silver jewelry, rings and components.🟢 Silver solder comes in 3 grades… the grades are the relative temperature flow points between one and the other. 🟢 The softer the solder the less content of silver with a lower melting temperature.SALE is for Handy Flux a 7oz. bottle with Brush and 3 GRADES of SILVER Solder Wire, (Soft, Medium and Hard) 12 Inch Long of each grade, total 36". 🔻 SOFT/EASY SPECIFICATIONS: JETS Product # 1020-40745223 🔻🔸 Solder WIRE: Silver Content of 65% 🔸 Melt temperature: 1,240°F - 671°C🔸 Flow temperature: 1,325°F - 718°C 🔻 MEDIUM SPECIFICATIONS: 🔻 🔸 Solder WIRE: Silver Content of 70% 🔸 Melt temperature: 1,275°F - 691°C 🔸 Flow temperature: 1,360°F - 738°C . 🔻 HARD SPECIFICATIONS: 🔻🔸 Solder WIRE: Silver Content of 75% 🔸 Melt temperature: 1,365°F - 741°C 🔸 Flow temperature: 1,450°F - 788°C Technical Information: NOTE: Lead, Cadmium FREE Solder -Solder Wire Thickness: 20ga - 0.032” - 0.81mm 🟢 Repairs: Lower-temperature solder is recommended for repair work, especially on pieces that may have been reworked and a high-temperature solder may cause a problem.🟢 Assembly Work: In multiple components, soldering use the Higher Temperature Solder first, then a medium grade, and finally to a soft lower melting point.🟢 Production: High-temperature solder, the Hard grade should be used, with the higher silver content, better match of color, and a stronger bond. Allowing future repairs to be performed with the softer solders.🔸 Attention: Solder is made to be used with a Torch, NOT with soldering gun or iron. NOTE: Visit JETSINC. our ebay Store, where you can see other grades of Solder along with listings of Alloy Metals, Brass, Copper and Zinc, various gauges of Copper & Brass Wires and a selection of Jewelers Equipment Tools and Supplies. JETSInc.RdO 1122 10B CKSP
Price: 31.95 USD
Location: Sun Valley, California
End Time: 2024-08-28T01:02:49.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: JTS
Type: Soldering Set
Color: Multicolor
Material: Solder Wire & Flux
Set Includes: 7oz Handy Flux and 3 Grades of Solder
Country/Region of Manufacture: United States
Suitable For: Jewelry Making, Soldering
California Prop 65 Warning: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to https: www.p65warnings.ca.gov/
