HS5157 Front Mount Hydraulic Steering Cylinder Seal Kit for SeaStar HC5345

Description: bestdealshopHS5157 Front Mount Hydraulic Steering Cylinder Seal Kit for SeaStar HC5345Description FITMENT: This HS5157 Front Mount Hydraulic Cylinder Seal Kit is designed as a replacement front seal for pivot/front mount cylinders. COMPATIBLITY: Fits Parts: for HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755 Cylinders. HS5157 KIT CONTAINS: Two seals/caps (one for each end of cylinder body), a spanner wrench tool needed to remove seal caps, all necessary o-rings. SUPERIOR MATERIAL: Made of high-quality aluminum, steel, rubber, can be used for a long time use in marine environments., will not rust and wear. High precision ensure years of trouble-free use. FUNCTION: Used to repair leaking or weeping cylinder seals. Rebuild the outboard front mount hydraulic cylinders, preventing the leaking of fluid and optimizing efficient performance Model Reference:Seal Kit for HC5345, HC5340 and HC5342 (threaded end gland), HC5347 (Pivot Cylinder, Honda 115-130 specific), HC5348 (Pivot Cylinder, OMC 77-90 specific), HC5365 (Compact Cylinder (threaded end gland)) and HC5394 (SeaRay Compact Cylinder (obsolete) (threaded gland)). Please Noted: Please make sure your cylinder shaft is not pitted or corroded. A damaged cylinder shaft may still leak even with new seals. Using Instruction: 1. Loosening the Seal Gland. Turn the outboard hard to port; place the pin wrench in the holes of a gland. And use a 5⁄8-inch box wrench on the nut on the port end of the piston rod. (NOTE:Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland) 2. Removing the Support Bracket. Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. (Do the same to the piston rod nut and washer. ) Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket. 3. Use the pin wrench to remove the Old Seal Gland. 4. Install the New Seal Gland. Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but don't tighten it yet. Remove the guide tool; it is not part of the final assembly, but you will need it for the other side. 5. Reinstall the Support Bracket. Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently. 6. Tightening the New Seal Gland. Use the pin wrench to tighten the new seal gland while using a 5⁄8-inch box wrench on the starboard end of the piston rod for counter torque. Packaged Included: 2 x Seals/caps (one for each end of cylinder body) 1 x Pin Wrench Tool (Needed to remove seal caps) 8 x O-rings PaymentDeliveryReturn the goodsFeedbackPayment 1.We accept PayPal. 2.All payments must be made within 4 days of purchase. 3.If for any reason you are not satisfied with the transaction, please contact us to resolve it before placing a nagative feedback.Delivery 1.We ship items within 1-2 business day after receiving cleared payment and you will receive them in 3-5 business days. (Saturday and Sunday excluded.) 2.If you have any questions about your shipment, please do not hesitate to contact us. Our customer service will try our best to solve the problem for you. 3.Our stock levels vary from time to time. The order will not be completed until the payment is processed. To avoid the situation of stock shortage, it is best to complete the order as soon as possible. Once the payment is processed, 98% of the products will be shipped within one business day. 4.Please allow 5-10 business days for arrival. We are not responsible for unidentified payments or delivery delays due to failure to follow instructions during checkout.Return the goods 1. If item is defective or faulty when received, please contact us for a return address. Returns are accepted within 30 or 60 days of receiving the item. 2. Returned items must be in their original condition. Buyer is responsible for return shipping. Once a return is received, we will make a replacement based on our available inventory or issue a refund if the item is out of stock.Feedback We request that you contact us immediately before leaving a neutral or negative feedback so that we can resolve your issue efficiently. It is impossible to resolve a problem if we do not understand it!On Aug 6, 2024 at 21:38:41 PDT, seller added the following information:

Price: 18 USD

Location: Ontario, California

End Time: 2024-10-23T07:31:32.000Z

Shipping Cost: 0 USD