HELIX V EIGHT DSP MK2 8x75w 10-Ch DSP + DIRECTOR Remote + DMP Mount NEW WARRANTY

Description: HELIX COMBO HELIX V EIGHT MK2 DSP 8x75w RMS + 10-Channel DSPHELIX DIRECTOR Touchscreen Remote ControlHELIX DMP Director Mounting Panel HELIX V EIGHT DSP MK2Features Up to 160 W RMS output power per channel into 2 Ω“Pure Class GD” concept for outstanding sound quality combined with best possible efficiencyExtremely powerful 64 Bit “fixed point” Audio DSPACO – Advanced 32 Bit CoProcessor platform for system and DSP features like:ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signalsSFX sound effects – Augmented Bass Processing, StageXpander, RealCenter & Co.High power 8-channel highlevel input with up to 32 V RMS input sensitivity and ADEP.3 circuitTwo processed RCA / Cinch outputs1:1 IOR (Input-to-Output Routing) – same number of highlevel inputs and amplifier outputsVCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systemsHELIX Extension Card slot (HEC) for additional input / output modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.Compact design with low heat dissipation thanks to extraordinary efficiencyTechnical dataPower RMS ≤ 1% THD+N - @ 4 Ohms75 Watts per channel- @ 2 Ohms120 Watts per channel- @ 1 Ohm- - bridged @ 4 Ohms- - bridged @ 2 Ohms- Max. output power per channel*Up to 160 Watts RMS @ 2 OhmsAmplifier technologyPure Class GDInputs6 x RCA / Cinch8 x Highlevel speaker input1 x Optical SPDIF (12 - 96 kHz)1 x Remote InInput sensitivityRCA / Cinch max. 4 V or max. 8 VHighlevel max. 16 V or max. 32 VInput impedance RCA / Cinch12 kOhmsInput impedance highlevel9 - 33 Ohms or 20 kOhmsOutputs8 x Speaker output2 x RCA / Cinch2 x Remote OutOutput voltage RCA / Cinch3 Volts RMSFrequency response20 Hz - 22,000 HzDSP resolution64 BitDSP power295 MHz (1.2 billion MAC operations/second)Sampling rate48 kHzDSP typeAudio signal processorSignal convertersA/D: AKM 32 BitD/A: AKM 32 BitSignal-to-noise ratio digital input107 dB (A-weighted)Signal-to-noise ration analog input102 dB (A-weighted)Distortion (THD)< 0.015 % Damping factor> 70Operating voltage10.5 - 18 Volts (max. 5 sec.down to 6 Volts)Idle current540 mAMax. remote output current500 mAOperating temperature range-40° C to +70° CFuse2 x 30 A LP-Mini-fuse (APS)Additional featuresHEC slot, ADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control InputDimensions (H x W x D)44 x 220 x 180 mm /1.73 x 8.66 x 7.09“* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)DIRECTOR - Display Remote Control Everything under control! With the new remote control DIRECTOR, you lead from the front! The 2.8” / 7 cm full colour touchscreen display and the intuitive menu navigation allow easy handling of many features – for example: Source selection Volume control of all sources Volume control of the subwoofer Control and configuration of the HEC BT module Switching between sound setups Furthermore it provides sufficient memory for 20 additional sound setups and comes with a USB connector allowing straight access to your DSP device via the DIRECTOR - a big relief if you want to tweak your configuration while your processor/amplifier is hidden somewhere in the trunk. The high-resolution, full colour touchscreen display is housed in what was solid block of aluminum. The DIRECTOR is compatible with all DSP products which are supported by DSP PC-Tool Version 3 and higher. Features § 2.8“ / 7 cm touchscreen display and powerful ARM processor § Easy handling of the main functions § Volume control of all sources § Volume control of the subwoofer § Source selection § Control of the HEC BT module (Bluetooth® Connect functions: pairing, reconnect, disconnect / Bluetooth® Control functions: track forward/back, play/pause) § Switching between sound setups § Memory locations for 20 additional sound setups (only devices without ACO platform) § Automatic dimming function of the display § Display rotation adjustable to 180° § Compatible with all DSP products which are supported by DSP PC-Tool Version 3 and higher § Exclusive solid aluminum housing § 17’ / 5.2 m connection cable included Technical data Dimensions (H x W x D) 53.50 x 135 x 18 mm; 2.07 x 5.32 x 0.71" DMP DIRECTOR mounting panel is made from an ABS plastic with a refined, black soft touch finish. This ensures a safe, flush finish that allows the Director to blend into your cars interior. Features § Material: ABS with black soft touch finish § Mounting screws for fixing the DIRECTOR to the mounting panel are included in delivery

Price: 1599 USD

Location: Yakima, Washington

End Time: 2024-09-17T18:36:53.000Z

Shipping Cost: N/A USD