HELIX V EIGHT DSP MK2 8x75 10-Ch DSP + CONDUCTOR Programable Remote NEW WARRANTY

Description: HELIX COMBO HELIX V EIGHT MK2 DSP 8x75w RMS + 10-Channel DSPHELIX CONDUCTOR Programable DSP Remote ControlHELIX V EIGHT DSP MK2Features Up to 160 W RMS output power per channel into 2 Ω“Pure Class GD” concept for outstanding sound quality combined with best possible efficiencyExtremely powerful 64 Bit “fixed point” Audio DSPACO – Advanced 32 Bit CoProcessor platform for system and DSP features like:ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signalsSFX sound effects – Augmented Bass Processing, StageXpander, RealCenter & Co.High power 8-channel highlevel input with up to 32 V RMS input sensitivity and ADEP.3 circuitTwo processed RCA / Cinch outputs1:1 IOR (Input-to-Output Routing) – same number of highlevel inputs and amplifier outputsVCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systemsHELIX Extension Card slot (HEC) for additional input / output modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.Compact design with low heat dissipation thanks to extraordinary efficiencyTechnical dataPower RMS ≤ 1% THD+N - @ 4 Ohms75 Watts per channel- @ 2 Ohms120 Watts per channel- @ 1 Ohm- - bridged @ 4 Ohms- - bridged @ 2 Ohms- Max. output power per channel*Up to 160 Watts RMS @ 2 OhmsAmplifier technologyPure Class GDInputs6 x RCA / Cinch8 x Highlevel speaker input1 x Optical SPDIF (12 - 96 kHz)1 x Remote InInput sensitivityRCA / Cinch max. 4 V or max. 8 VHighlevel max. 16 V or max. 32 VInput impedance RCA / Cinch12 kOhmsInput impedance highlevel9 - 33 Ohms or 20 kOhmsOutputs8 x Speaker output2 x RCA / Cinch2 x Remote OutOutput voltage RCA / Cinch3 Volts RMSFrequency response20 Hz - 22,000 HzDSP resolution64 BitDSP power295 MHz (1.2 billion MAC operations/second)Sampling rate48 kHzDSP typeAudio signal processorSignal convertersA/D: AKM 32 BitD/A: AKM 32 BitSignal-to-noise ratio digital input107 dB (A-weighted)Signal-to-noise ration analog input102 dB (A-weighted)Distortion (THD)< 0.015 % Damping factor> 70Operating voltage10.5 - 18 Volts (max. 5 sec.down to 6 Volts)Idle current540 mAMax. remote output current500 mAOperating temperature range-40° C to +70° CFuse2 x 30 A LP-Mini-fuse (APS)Additional featuresHEC slot, ADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control InputDimensions (H x W x D)44 x 220 x 180 mm /1.73 x 8.66 x 7.09“* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)CONDUCTOR Features § Up to 4 individual volume menus configurable (Master, Digital, HEC/AUX, Subwoofer, Rear Attenuation) § Volume range selectable (60 dB, 24 dB, 12 dB) § Volume steps selectable (1 dB steps, 0.5 dB steps) § Individual color for each volume menu configurable § Sound Setup selection between all 10 memory slots § Intuitive Bluetooth playback control and pairing activation (only in combination with an optional Bluetooth Extension Card) § 12 x RGB-LEDs for visual feedback § Wide color space with over 16 million colors § Brightness and automatic dimming function configurable § Easy installation § Flush mount installation with Ø 40 mm hole cut-out § 5 m cable harness with split connector and single connector supply § Optional housing for on-dash installation available soon § Full configuration and updatability through the DSP PC-Tool software Technical data CONDUCTOR for Control Input Housing ABS housing with machined aluminum knob Hardware Rotary encoder, 12 x RGB-LEDs & 48 MHz ARM processor Connection Single connector supply through NanoFit Cable length 5 m total length – split into 4.8 m connection cable + 0.2 m CONDUCTOR cable Dimensions (Ø x H) Ø 46 x 28.7 mm / Ø 1.81 x 1.13” Installation depth 17 mm / 0.67"

Price: 1399 USD

Location: Yakima, Washington

End Time: 2024-09-17T18:36:53.000Z

Shipping Cost: N/A USD