HELIX M ONE 600W @ 1 OHM Monoblock Subwoofer Amplifier NEW Warranty

Description: HELIX M ONEPress & awardsTechnologiesAmplifier ClassInputs Hardware Technologies Additional Features Small, efficient and uncompromisingly stable – the M ONE is a highly compact monoblock for subwoofer applications. Designed from latest Class D technology this tiny amp can easily control speakers with 1 Ohm impedance. Its current capability makes the M ONE a perfect partner for 2 x 2 Ohms subwoofers, where both voice coils are connected in parallel.In addition a comprehensive and stunningly practical feature set leaves nothing to be desired. Last but not least installation will be a no-brainer due to the minimal dimensions.FeaturesSmall footprint Class D amplifier with high output power of 600 Watts RMS @ 1 Ohm for easiest combination with all 2 x 2 Ohms subwoofers connected in parallelStart-Stop capability down to 6V supply voltageSmart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection) and Auto Turn-On functionIntegrated, active crossover with lowpass, bass boost, subsonic and phase controlExtremely stable output stage with high-current power transistors and 1 Ohm stabilityBass remote control for volume adjustmentSMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliabilityExclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiencySpecial features:Smart highlevel inputThe latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appear - but not with the M ONE.The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.Start-Stop capabilityThe switched power supply of the HELIX M ONE assures operation even if the battery’s voltage drops down to 6 Volts during engine crank.Technical dataOutput power RMS ≤ 1% THD+N - @ 4 Ohms1 x 240 Watts- @ 2 Ohms1 x 410 Watts- @ 1 Ohm1 x 600 Watts- bridged @ 4 Ohms-- bridged @ 2 Ohms-Max. output power per channel*Up to 720 Watts RMS @ 1 OhmAmplifier technologyClass DInputs2 x RCA / Cinch2 x Highlevel speaker input1 x Remote In1 x Remote control inputInput sensitivityRCA / Cinch 0.5 - 6 VoltsHighlevel 1.1 - 13 VoltsInput impedance RCA / Cinch20 kOhmsInput impedance highlevel13 OhmsOutputs1 x Speaker outputOutput voltage RCA / Cinch- Signal converter for digital input- Frequency response10 Hz - 250 HzBass boost0 - 12 dB / 25 - 75 HzHighpass- Lowpass50 Hz - 250 Hz adjustableBandpass10 Hz - 250 Hz adjustableSubsonic10 Hz - 50 Hz adjustablePhase0 - 180° adjustableSlope high- / lowpass- Slope subsonic / lowpass12 / 24 dB/Oct.Signal-to-noise ratio digital input- Signal-to-noise ratio analog input95 dB (A-weighted)Distortion (THD)0.20 %Damping factor100Operating voltage10.5 - 16 Volts (max. 5 sec. down to 6 Volts)Idle current650 mAOperating temperature range-40° C to +70° CFuse2 x 35 A Maxi-fuse (APX)Additional featuresActive, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control Dimensions (H x W x D)50 x 230 x 154 mm /2.00 x 9.06 x 6.06”* In typical applications as subwoofer amplifierScope of delivery1 x Amplifier HELIX M ONE1 x Cable remote control1 x Mounting material1 x Instruction manual

Price: 369 USD

Location: Yakima, Washington

End Time: 2024-12-18T04:24:17.000Z

Shipping Cost: 0 USD