Hard Lure Mold Kit, Glider Stick Bait, DIY hard lure, 3 inch / 75 mm

Description: We are proud to bring to your attention this outstanding hard bait kit which will help you produce beautiful, effective and extremely durable polyurethane resin sliders. The solid T-shaped stainless steel blank goes along the entire length of the lure and makes it incredibly strong and durable. The hard lures (sliders) made with this kit have the following specifications: Length: 7.5 cm / 3 inchWeight: You can determine the weight of the lure yourself by adjusting the lead strip.Depth: 50-80 cm / 2.5 ft, use twitch movements for best action. The kit consists of the following:1 red silicone mold5 T-shaped laser cut stainless steel blanks designed for the mold, 1.6 g each5 rolls of lead strip, 10 g each You can order extra lead rolls and steel blanks here. How do you make the lures: 1. Apply a thin layer of vaseline on the mold or spray with a release agent for lubrication.2. Roll the lead around the T-shaped blank as shown on pictures 2 and 3. You can easily adjust the weight of the lure.3. Having placed the blank into the mold, you can close and secure the mold with clamps or rubber bands. For best results place the mold at 45 degree angle and pour your polyurethane resin into the mold.4. After the resin has dried, you can open the mold and cut off the redundant part. Now is the time to embellish your lure with powder colorants, dyes, permanent markers etc. and add eyes. 5. Seal the lure with varnish or other quality hard coating and let it dry. We recommend our hard bait UV coating.6. After the coating has dried, you can attach the hooks. All hard baits in the pictures were made with this mold. They are not included in the sale. We create new original products every month. Subscribe to our Newsletter HERE to stay up to date.

Price: 64.9 USD

Location: Varna

End Time: 2023-10-24T12:54:46.000Z

Shipping Cost: 16 USD