Hantek Oscilloscope CC65 CC650 AC/DC Current Clamp Probe Suitable For 1008C

Description: Hantek CC65 Digital AC/DC Current Clamp Meter Multimeter Oscilloscope with BNC Connector It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. When measuring AC/DC Current with the Current Clamp, a multimeter or scope can directly measure the current up to 65A, with a frequency uo to 20KHz. In this method, there is no need to break a circuit or to affect the isolation to measure the current. Features: AC/DC frequency range: up to 20KHz. Effective measurement range: 20mA to 65A DC. Allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. If connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms. Application: Power circuit measurement and malfunction analysis; Motor drive of frequency converter (or other electronics) measurement; Power electronics equipment measurement. DCA Range 1 mV /10mA (1.5%5mA) 10mA ~ 20A 1mV/100mA (2%20mA) 100mA ~ 40A; (4%0.3A) 40A ~ 65A ACA Range 1mV/10mA (2%30mA) 100mA ~ 10A (40Hz ~ 2KHz); (4%30mA) 100mA ~ 10A (2KHz ~ 10KHz); (6%30mA) 100mA ~ 10A (10KHz ~ 20KHz); (8%30mA) 10A ~ 15A (40Hz ~ 20KHz) 1mV/100mA (2%30mA) 200mA ~ 40A (40Hz ~ 1KHz); (4%30mA) 200mA ~ 40A (1KHz ~ 2KHz); (6%30mA) 200mA ~ 40A (3KHz ~ 5KHz); (8%0.3A) 40A ~ 65A (40Hz ~ 20KHz) Captured Conductor Size 9mm maximum Low Battery Indictor Red LED lighting Operating Temperature 0 to 5070% R.H. Storage Temperature -20 to +70, 80% R.H. Battery Type 9V DC, NEDA 1604, 6F22,0006P Battery Life 100 hours typical with alkaline Weight 250 gm typical Dimensions 195mm(H) x 70mm(W) x 33mm(D) Output Supplied with coil cable with straight banana plug or BNC plug. Package included: 1 x Hantek CC65 Current Clamp with BNC Plug 1 x English User Manual Hantek CC-650 AC/DC Current Clamp Meter Multimeter w/ Oscilloscope BNC Connector Features: 1. AC/DC frequency range: Up to 400Hz Effective Measurement Range: 20mA to 650A DC It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data. Application: Power circuit measurement and malfunction analysis; Motor drive of frequency converter (or other electronics) measurement; Power electronics equipments measurement. Specification: Conventional characteristic measurable conductor size: the largest diameter of 30 mm Low power indicator: red led lights flashing Working temperature range: 0C to 50C, 70% R.H. Storage temperature range: - 20 C ~ + 70 C , 80% R.H. Electrical characteristics precision: (23 ± 5C , 70% R.H. maximum) Dc current: 0 to 650A , +/- (3% reading + 2A ) Alternating current (50 hz to 400 hz) : 0 to 500A , +/-(3% reading + 2A ) 500A to 600A , +/- (6% reading + 2A ) 600A to 650A , +/-(8% reading + 2A ) Load impedance: 10 k Ω (typical value) Output scale: 0 to 650 mv (AC/DC) corresponding to 0 to 650A (1 mV / 1A file); 0 to 1.6 V (AC/DC) corresponding to 0 to 160 a (1 mV / 100 mA file); Battery life: a typical carbon zinc batteries for 100 hours. Size: 178 mm (H) x 70 mm (W) x 33 mm (D) Weight: 290 gm (typical)Package included: 1 x Hantek CC650 Current Clamp with BNC Plug 1 x English User Manual

Price: 66 USD

Location: SHENZHEN, GD

End Time: 2024-08-13T01:55:28.000Z

Shipping Cost: 0 USD