HANGKAI 2/4Stroke 6-12 HP Outboard Motor Air/Water Cooling Fishing Boat Engine

Description: Welcome to our store, we have high-quality pre-sales and after-sales service. Before you buy this Item, you can contact us if you have any questions, and we will answer you in time. I wish you all the best.HANGKAI 2/4Stroke 6-12 HP Outboard Motor Air/Water Cooling Fishing Boat Engine Outboard Motor 6-12HP 2/4 Stroke Fishing Boat Engine Water/Air Cooling HANGKAI Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.Don't do the following will avoid cylinder Scoring:1，start the motor on bank2, use the motor when it stop coming out of waterEven if you want test the motor, it should be done in the river!1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon 2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed 3.It can be marched with inflatable boats, rubber boats or fishing boats 4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat MODEL ONE: 3.5HP & 2-Stroke(TYPE ONE) Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!Notice: If any problem with the shipment, please contact custom service.We would help you with any problem about the order. It's our pleasure to serve you Description The 3.5HP outboard motor is used for fishing boats and speedboats. It will make you more relaxed and efficient whether work or play! Key Features High-quality Material: The high-quality aluminum alloy raw material has high hardness, anti-corrosion and anti-rust performance, which can effectively prolong the service life of the product. Powerful Motor: This engine is a 3.5hp engine with a speed of up to 5000 rpm. The powerful power allows you to drive quickly and save a lot of time. Start Quickly: It adopts a CDI ignition system, you can start the motor quickly and safely, making it easier to use and saving your energy. Good Cooling Effect: The heat sinkholes in the engine casing dissipate heat quickly to prevent burning after long periods of use. The semi-air-cooled system also makes it cool faster and reduces the failure rate. Excellent Endurance: Low fuel consumption, efficient two-stroke motor provide you with a long endurance to meet the needs of short/long distance travel. Inline Propeller Design: The propeller of this item adopts an inline design, with high-speed engine that can more effectively play the outboard exhaust and thrust. 180° Steering Function: It has a 180° steering function that allows you to reverse without shifting gears. Tilt Function: This item has a tilt or lift function, and can be used for shallow water operation for your convenience. Guaranteed Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible. Details Tightened Bracket: The tightened brackets are used to secure the thrusters and transom plates of the ship so that the thruster will not fall from your boats. Anti-Vortex Board: The is an anti-vortex board above the propeller. It keeps the water flow steady and you have a good driving experience. Funnel: The package comes with a funnel, you can add fuel to this motor conveniently. Rubber Handle: The handle of this motor is made of high-quality rubber, it increases the friction and prevents your hand from slipping. Easy-to-open Engine Cover: The easy-to-open engine cover with a push-button latch for immediate access to the engine for you to check real-time conditions and make timely adjustments. Application It is suitable for boats weighing 100-200kg, with a speed of about 8-10km/h (The speed will vary depending on the environment, the water and the weight of the boat.) Specification Full Throttle Operating Range:4000-5000r/Min Maximum Output: 2.5kw(3.5hp) Speed:10km/H Type: 2-Stroke Ignition System: CDI System Starting System: Manual Start Staring Carburetion System: Choke Start Propeller Mark: 7-1/45-a(Inch) The Engine and the Propeller Ratio:2:1 Recommended Fuel: Regular Unleaded Gasoline Fuel Type: Mixed Oil (Run-in Period: 25 Gasoline: 1 2-stroke Engine Oil; after Run-in Period: 50 Gasoline: 1 2-stroke Engine Oil) Gear Ratio: 27/13 Maximum Speed: 10 Km / H Built-in Fuel Tank: 1.3L/0.29Gal Fuel Consumption per Hour: 1.5L/0.33Gal Transom Height:42cm/16.54 Adaptive Transom Plate Height: ≤42cm/16.53in Gross Weight: 12kg/26.4lbs Net Weight: 9.8kg/21.6lbs Product Size: 92*36*15cm/36*14.17*5.9in Package Size: 95*42*30cm/37.4*16.5*11.81in Adaptable Stern Height: 38-44cm/14.96-17.32inch Measurement of the Stern: The Distance from the Place Where the Machine is Hung on the Stern to the Ground Package Included 1* Outboard Motor 1* Tool Kit 1* Fuel Oil Mixing Bottle 1* Funnel 1* Spare Pull Rope 1* English Manual Notes 1.Please read the attached instruction manual completely before use. And pay particular attention to the safety instructions included. 2.Please add gear oil to the gears before using the motor and replace gear oil after the run-in period(10 hours).(If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself. 3.Do not touch or remove electrical parts when starting or during operation. Keep hands, hair, and clothes away from the flywheel and other rotating parts while the engine is running. 4.Please don't start the motor on the bank. If you want to test the motor, it should be done in the river. Please don't use the motor when it stops coming out of water. 5.When there is no water coming out of the motor, please stop using it immediately, and then check whether the pump impeller or the water outlet is blocked. 6.We can only provide Ce certification, no other certification can be provided, thank you for your understanding. 7.Clean the outboard engine with fresh water after sailing in seawater or turbid water. Do not leave the outboard engine out until the cooling water is completely used up. Otherwise, the water cam will enter the cylinder through the exhaust port. This will cause engine failure. 8.Use up the gasoline in the fuel tank before storing for a long time. The engine should be stored in a dry and well-ventilated place, avoiding direct exposure to sunlight. 9.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. MODEL TWO: 3.6HP & 2-Stroke Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!About certification:We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.SKU:OT-ML-132Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or lowspeed mode STRICTLY FOR PROFESSIONAL USE ONLY1.Start-In-Gear protection/clutch feature prohibits prop rotation while idling2.Lift/Tilt feature for shallow water operation and convenience3.Features 360 degree steering rotation for reverse without gear shifting4.Superior engine water cooling system for improved engine performance5.Easy pull off engine cover with push button latch for instant motor accessProduct DescriptionMAX SPEED：4000~5500rpm Short shaft ：40cm Features: Features 360 degree steering rotation for reverse without gear shifting .Start-In-Gear protection/clutch feature prohibits prop rotation while idling .Lift/Tilt feature for shallow water operation and convenience . Superior engine water cooling system for improved engine performance . Easy pull off engine cover with push button latch for instant motor access . Standard CDI ignition system for easy starting and improved performance . Vertical mount engine design for increased power, performance and durability . Superior carbonation system with primer bulb for increased efficiency .Twist grip throttle handle and engine stop button for improved response .Superior outboard anti corrosion system and anodes for increased durability .Durable cast Nylon plastic construction for superior corrosion protection .Through the prop exhaust outlet for decreased noise and pollutant .Heavy duty lightweight Nylon plastic cast propeller is standard equipmentShipping Weight: 21.4 poundsMODEL THREE:3.5HP & 2-Stroke (TYPE TWO) Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!About certification:We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.SKU：OT-ML-279Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode Description With a sturdy and powerful propeller, and precise speed control, the outboard motor is a good helper for your water work. It is easy to operate, allowing you to fish in the water, explore outdoors at optimal speed and low noise. Key Features High-quality Material: The high-quality aluminum alloy raw material has high hardness, anti-corrosion and anti-rust performance, which can effectively prolong the service life of the product. Powerful Motor: This engine is a 3.5hp engine with a speed of up to 5000 rpm. The powerful power allows you to drive quickly and save a lot of time. Start Quickly: It adopts a CDI ignition system, you can start the motor quickly and safely, making it easier to use and saving your energy. Good Cooling Effect: The heat sinkholes in the engine casing dissipate heat quickly to prevent burning after long periods of use. The semi-air-cooled system also makes it cool faster and reduces the failure rate. Excellent Endurance: Low fuel consumption, efficient two-stroke motor provide you with a long endurance to meet the needs of short/long distance travel. Easy to Operate: It has a manual start function, the ergonomic rubber handle is non-slip for easy grip. You just need to pull the engine switch and turn on the speed switch on the handle for easy operation. Guaranteed Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible. Details Mounting bracket: It can firmly fix the engine on the boat. Three-blade Propeller: The streamlined design can effectively reduce the resistance of water during traveling, providing you with more power. Anti-Vortex Board: It can effectively reduce the turbulence of air waves, keep the water flow stable, avoid wetting your clothes, and let you have a good driving experience. Application This outboard motor is suitable for small boats with different materials, such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats. It is widely used in fishery, aquaculture, outdoor exploration, etc. Specifications Type: 2-Stroke Ignition System: CDI System Starting System: Manual Start Recommended Fuel: Regular Unleaded Gasoline Speed: 12km/h(Four People) Maximum Output: 2.5kw(3.5hp) Full Throttle Operating Range: 4000-5000r/Min Propeller Mark: 7-1/45-a(Inch) The Engine And The Propeller Ratio: 2: 1 Fuel Type: Mixed Oil (Run-in Period: 25 Gasoline: 1 2-stroke Engine Oil; after Run-in Period: 50 Gasoline: 1 2-stroke Engine Oil) Gear Ratio: 27/13 Product Size: 90*38*18cm/35.4*15*7in Propeller Length: 18cm/7.09in Adjustment Rod Length: 40cm/15.75in Engine Height: 16cm/6.30in Gross Weight: 13kg/28.66lbs Package Size: 95*31*44cm/37.40*12.20*17.32in Package Included 1x Outboard Motor 1x Water Pump Impeller 1x Starter 1x Funnel 1x Fuel Oil Mixing Bottle 1x English Instruction All Tools Needed for Assembly Notes 1. Please note that it cannot be started on shore. 2. After use, please wash the outboard engine with fresh water and cool the waterway with fresh water. 3. Please do not leave the outboard engine outside until the cooling water is completely used up. Otherwise, water will enter the cylinder through the exhaust port and cause engine failure. 4. The engine should be stored in a humid and ventilated place, avoiding direct exposure to sunlight. Before long-term storage, the gasoline in the fuel tank should be thoroughly removed. 5. Please note that it can not be started on shore, please pull the pulling plate firmly. 6. Please allow slight color difference caused by shooting light and 1-3 cm error caused by manual measurement, and make sure you don't mind before ordering. STRICTLY FOR PROFESSIONAL USE ONLY Type: 4 stroke 4 horsepowerShort shaft ：40cm Capacity: 52ccTransmission ratio: 2.08 (27:13)The number of cylinders: 1MAX SPEED：4500~5500rpmMaximum power: 2.8 kW /4 HPShift position: clutch controlPackage volume: 95x40x30 cmIgnition system: CDICooling system: air coolingStarting method: Manual startRefueling: No. 93 gasolinePropeller size: 7 1/4X7-AThe maximum fuel consumption: 1.4 liters / hourRecommended Lubricant:4 stroke lubricating oilMixing ratio:Pure gasolineTrim and tilt system:Manual TiltStart-In-Gear protection/clutch feature prohibits prop rotation while idlingconvenienceFeatures 360 degree steering rotation for reverse without gear shiftingCooling system: air coolingEasy pull off engine cover with push button latch for instant motor access Please note that this product is manual available in English, German and French, please contact customer service for more information. MODEL FIVE:6HP & 2-Stroke OT-C001-073 Description Have you encountered any difficulties in venturing into long-distance deep water? An outboard motor that can handle various complex water conditions can provide you with assistance! The powerful 6-horsepower two-stroke engine allows you to overcome obstacles in various environmental waters and quickly reach the places you need to go with excellent speed. The large-capacity fuel tank also eliminates the hassle of frequent refueling. With its companionship, you can fully enjoy the pleasure of sailing and become a reckless captain! Key Features Fast & Powerful: A 2-stroke engine with a maximum output of 4.4kw and 6hp, and a maximum speed of 5500rpm, provides you with unparalleled speed. The streamlined design of a 7'' three-blade propeller can reduce water resistance and provide stronger power during operation. Selected Material: Lightweight and sturdy aluminum alloy, combined with spray painting technology, provides excellent corrosion resistance, wear resistance, heat resistance, shock resistance, deformation resistance, and other properties. You can use it with confidence in fresh water and salt water. Easy to Operate: The throttle lever directly controls acceleration and steering. The step-less speed regulation allow you to easily adjust the running speed, combined with simple gear shifting (forward, neutral, or reverse), bringing you a more comfortable and convenient user experience. Low Noise: The large muffler above can isolate most of the noise, making the sound of the machine running around 80 decibels, allowing you to hear other movements on the water and remain vigilant. Small & Fuel-efficient: As an outboard motor, it is relatively small(43.3*14.56*21.26in) and lightweight(45.3lbs), making it very suitable for small ships and people who frequently navigate short distances. An efficient carburetor burns fuel more fully, with a fuel consumption rate of 0.66gal/h not only saving fuel but also reducing expenses. Safe & Reassuring: The reliable CDI ignition system can quickly and safely start the motor, and suspension tilt adjustment pins and anti-vortex plates reduce inclination and vortices, ensuring smooth operation. The water cooling system is designed to maintain the optimal temperature, coupled with overheating protection, allowing you to continuously enjoy the fun of the navigation. Complete Set: In addition to the outboard motor, our package also includes a funnel, manuals, safety rope, etc., which can meet your usage needs at once. Protective Packaging: This product comes in a custom foam that resists common compression and falls to prevent product damage in transit as much as possible. Details Locking Handle: The locking handle below the muffler allows you to easily open the casing to check the internal motor. Tail Plate Clamping Bolt: It can firmly fix the outboard motor on your ship and is not easy to slide. Rubber Handle Cover: The rubber-wrapped handle is softer and increases friction, providing a more reliable grip. Cooling Water Outlet: You can determine whether the water pump is working properly by checking whether it is producing water, to promptly repair the engine if it may malfunction. Application It is suitable for rubber boats, inflatable boats, fishing boats, sailboats, yachts, canoes, kayaks, rubber boats, aluminum alloy boats, etc. with a stern height of 17.32 inches or less, assisting aquaculture, water transportation, net fishing, luring, outboard backup, outings, and river cleaning/maintenance. Specifications Material: Aluminum Alloy Color: Black Surface Treatment: Spray Paint Assembly Required: No Number of Items: 1 Engine: 2-stroke 6hp Displacement: 102cc Gear Ratio: 2.08(27:13) Number of Cylinder: 1 Max. Output: 4.4KW Max. Speed: 4500-5500r/Min Noise: About 80DB Gear Positions: F-N-R Ignition System: CDI Cooling System: Water-cooling Control System: Tiller Control Starting System: Manual Start Gasoline: No.92 Lead-free Gasoline Fuel Type: Mixed Oil (50 Gasoline: 1 2-stroke Engine Oil) Trim And Tilt System: Manual Tilt Fuel Tank Capacity: 2.5L/0.66gal Fuel Consumption Rate: 2.5L/0.66gal/h Bore*Stroke: 5.5*4.3cm/2.16*1.7in Propeller Diameter: 18cm/7in Handle Length: 36cm/14.17in Adaptive Transom Plate Height: ≤44cm/17.32in Gross Weight: 24.15kg/53.24lbs Net Weight: 20.55kg/45.3lbs Product Size: 105*48*24cm/41.3*18.9*9.4in Package Size: 110*37*54cm/43.3*14.56*21.26in Package Included 1x Outboard Motor 1x Flameout Rope 1x Tool Kit 1x Fuel Oil Mixing Bottle 1x Funnel 1x English Manual 1x English Operation Instructions All Accessories for Assembly Notes 1.Please carefully read the manual and strictly follow the precautions to have a better experience. 2.Please measure the height of your boat before purchasing to ensure suitability for this product. 3.Please start the motor in the water. If the motor stops circulating water, please stop using it immediately and check the impeller of the water pump to see if the water outlet is blocked. 4.Please note that this product should use a mixture of two-stroke engine oil and 92 # unleaded gasoline. The running-in period of the new machine is 10 hours, during which the fuel ratio is 30L (7.93 gal) of gasoline to 1L (0.26 gal) of engine oil. After 10 hours, the ratio is 50 liters (13.21 gallons) of gasoline to 1 liter (0.26 gallons) of oil. 5.Please note that the emergency shutdown rope should be inserted when the outboard motor is started, and the other end should be wrapped around your wrist or belt. 6.Please do not drive too fast during the running-in period. After the running-in period, the gear oil needs to be replaced, and the second replacement time is about 100 hours or 6 months later. 7.Please do not leave this product outside until the cooling water is completely used up. Otherwise, water will enter the cylinder through the exhaust port, leading to engine failure. After cruising in seawater or turbid water, please clean the outboard motor with fresh water and cool the water channel with fresh water. The engine should be stored in a dry and well-ventilated place, and avoid direct exposure to sunlight. 8.If not in use for a long time, please thoroughly clean the gasoline in the fuel tank. 9.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.. 10.Please note that this product is manual available in English, German and French, please contact customer service for more information. MODEL SIX:7HP & 4-StrokeOT-ML-278 Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!Must read before use!Four stroke 4 hp:Firstly,Fill the gear oil (open gear box lid and fill it).Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.Thirdly,Fill engine oil don't exceed the head of the pattern.Forthly,Pull the gear to netural gear, and plug the brake line in, hang the other side of the brake line on your wrist at the same time.Then,turn the accelerator gets up to 50% and rapidly pull the starter line.After the motor start ,please turn the gear to minimum before put another gear.Otherwise, the gearwheel will be broken if you put high gear.universal motors, high performance, reliable qualityPerfect match inflatable boats, fishing boats, sailboats, and small yachts.Economical and compact structure. Durable, lightweight and anti-corrosive construction.Maneuverable and safe twist grip throttle control. Suitable for: Freshwater and saltwaterOne year warranty covers the motor, to provide parts freeMAX SPEED：4500~6000rpmType: 4 stroke 7 horsepowerCapacity: 173ccTransmission ratio: 2.08 (27:13)The number of cylinders: 1Maximum power: 5.1 kW /7 HPShift position: clutch controlPackage volume: 120x60x42.5 cmIgnition system: TCIShort shaft ：45cm Cooling system: air coolingStarting method: hand startRefueling: No. 93 gasolinePropeller size: 3-7 1/2''x5''Gear position:F-N-RControl system: Tiller controlN.W./G.W.:26.7/31.7kgsRecommended Lubricant：4 stroke lubricant oilTrim and tilt system:Mannual tiltStandard fuel tank capacity:1.4L/within Modek Seven:6.5HP&4-Stroke OT-ML-282Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!About certification:We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.The Hangkai 6.5 hp 4-stroke provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport! With all of this available at a competitive price, it is no wonder this little outboard receives so much attention and praise!Brand: HANGKAI Displacement: 123CC Gear ratio: 2.08(27:13) Cylinder: 1 Max.Output(kw): 4.8 Max.speed(r/min): 5000-6000 Gear Positions: F-N-R Packing size: 114x64x41cm Ignition System: CDI Cooling System: Water-coolingShort shaft ：40cm Control System: Tiller controlStarting System: Manual startControl System: #93 gasolineN.W./G.W.(kgs): 26/31.2Bore x Stroke(mm): 59x45Recommended Propeller range: 3 -7"x9"Recommended Lubricant: Four Stroke Lubricating oilMixing ratio: Pure gasolineTrim and tilt system: Manual TiltOverall LxWxH(cm): 78.3x34.3x103.9Standard fueel tank capacity: 12LOptional fuel tand capacity: /Bonus accessories:brochures, tubing, cotter pinsPump impeller, start rope, start key12 liter fuel tank, tool kit, spark plug, cylinder head padOT-028操作使用视频 OT-028操作使用视频 note：Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself. PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.BrandUnbrandMPN1254897658reverse gearwithout* Feature *Creative Design，Durable Material，Beautiful AppearanceBoat & Watercraft TypeOutboard MotorsWarranty5 YearsUPCDoes not applyCertificationDOT, SAEOn Mar 27, 2024 at 02:33:12 PDT, seller added the following information:

Price: 220 USD

Location: Chino, California

End Time: 2024-04-27T06:48:06.000Z

Shipping Cost: 0 USD