GRS GraverSmith Pneumatic Engraving Air System w/ Foot Pedal & Air Filter

Description: The GraverSmith is in used and fully working condition. Worked just fine while in my possession. The air filter and foot control will come disassembled so that everything fits in the packaging. What's pictured is what will be sent. A handpiece will be needed if you don't have one. The item will be shipped via USPS. If you are new to using one of these, I highly recommend going over the manual (You can find it online by searching). I also recommend using a California Air Tools Compressor (With an Aluminum tank). - The GraverSmith® is an engraving system engineered and manufactured under the GRS® Tools line of products by Glendo LLC in the United States of America. This system is designed for assistance in creating unique works in metal, stone, wood, ivory, and many other materials. This engraving system requires clean, dry, oil-free air. An oil-free compressor is recommended for use with this system. For any oil-type compressors, an oil-removal filter (coalescing type) in the air supply line to this engraving system MUST BE INSTALLED AND IN USE. For help with ordering or installing an oil-removal filter, or for guidance with operation or maintenance, please contact GRS® or an authorized GRS® dealer. Like other power tools, this device exposes the operator to mechanical vibration. If any user experiences discomfort, pain,numbness, aching, etc., in their hands, fingers, arms, or related joints, discontinue use and consult with an appropriate health professional. Although this equipment does not generate dust itself, the tools used in the handpieces may do so. When sharpening tools, the user should take appropriate steps to avoid dust inhalation. Certain tool materials generate harmful dust while being ground or sharpened. The proper use of this equipment does not generate significant orharmful noise emissions. USE ONLY THE SUPPLIED 24-VOLT POWER CONVERTER. The included power converter may be connected to any properly grounded single-phase source of AC power within a voltage range of 100 to 240 V, 50 or 60 Hz. If necessary, use the supplied grounded 2-prong plug adapter or other suitable adapter. The power converter must be used with a suitable grounded electrical system. Using it with an ungrounded system could expose the equipment to electrical damage. Do not use older generation power converters. If a replacement is needed, contact GRS® or an authorized GRS® dealer to order #022-987.DO NOT OPERATE THE MACHINE WITHOUT A COMPRESSED AIR SUPPLY.Compressed air not only provides the handpiece with power, it lubricates internal components including the rotary air valve. Do not add oil or any lubricant to the compressed air supply.• A compatible GRS® pneumatic handpieceAll GRS® Standard Handpieces (and GRS® Airtact Handpieces with an attached Airtact Control System) are compatible with this system. DO NOT USE SYSTEM 3 OR GRAVERMEISTER® HANDPIECES. Please contact GRS® or an authorized GRS® dealer for a complete list of compatible handpieces.• A graver or similar toolA properly sharpened graver or similar tool is required to cut through the surface of metal and other materials; use with care. The dust created while sharpening some tool materials may present a health risk. Please contact GRS® or an authorized GRS® dealer for a list of available gravers and tools. Oil-free compressors are ALWAYS RECOMMENDED. When using an oil-lubricated compressor, install an oil-removal filter (coalescing type – GRS® #004-730 or equivalent) in the air supply line to this engraving system. Damage due to oil or water contamination IS NOT COVERED BY WARRANTY. Even slight amounts of oil can damage internal parts and cause erratic handpiece operation. The supplied final filter is not capable of removing large amounts of water, oil, or contaminants. See Setup & Connections for mounting the supplied air filter to engraving system. If compressed air supply has excessive water, oil, or contaminants, an additional filter/water trap and oil-removal filter (coalescing type) must be installed ahead ofthe engraving system.GraverSmith® requires a compressed air supply with minimum pressure 45 psi (3 bar) and maximum pressure 120 psi (8 bar). The compressed air supply must have a minimum flow capacity of 1.4 CFM [ft³/min] or 40 LPM [L/min]. To ensure a stablecompressed air supply, the user should consider an additional air regulator to adjust the air pressure to 45-60 psi (3-4 bar) before it enters the GraverSmith®. DO NOT OPERATE ENGRAVING SYSTEM WITHOUT AN ACTIVE AIR SUPPLY CONNECTED.The air supply lubricates the rotary valve as the air passes through the system. No additional lubrication is required

Price: 960 USD

Location: Garland, Texas

End Time: 2024-11-11T04:22:13.000Z

Shipping Cost: N/A USD