Gigatronics 1026 Signal Generator 0.05-26.5 GHz Tested and Working

Description: Gigatronics 1026 Signal Generator 50 MHz to 26.5 GHz Tested and WorkingNew Capacitors Installed The Gigatronics 1026 Signal Generator/Counter provides several microwave generation and measurement functions which result in making the instrument a versatile microwave test set that can replace a number of instruments in many applications. The unit is a 50 MHz to 26.5 GHz digital synthesized signal generator that provides precise, highly stable and calibrated signal output. The synthesized output has versatile pulse modulation, amplitude modulation and digital sweep with selectable limits in precise increments of 1MHz, 10MHz or 100MHz. A sweep output is provided to drive XY plotters, oscilloscopes or other external indicating devices. Gigatronics 1026 Features Frequency Range: 50 MHz to 26.5 GHz Internal Step Attenuator IEEE488 GPIB Low Spurious and Phase Noise ±1 dB Leveling High Resolution AM, FM, Pulse and Scan Modulation Synthesized Accuracy Digital Frequency Sweep Gigatronics 1026 Specifications Frequency Characteristics Range: 2 to 26 GHz Resolution: 1 MHz Accuracy: Same as Time Base Time Base (External): 10 MHz ±1x10-9 or better; 0.5 to 5 Vp-p overrides internal time base Time Base Output: Buffered 10 MHz, 1 V RMS into 50 ohms, drived from internal or external time base Spectral Purity Harmonics, Subharmonics: <-55 dBc Spurious (Nonharmonics): <-55 dBc RF Output Characteristics Max Leveled Output: ≥+5 dBm Output Level Accuracy: ±1 dB to 18 GHz; ±2 dB from 18 to 26 GHz Attenuation: 99 dB in 1dB steps Level Adjustment: -5 dB to +15 dB Venier Level Adjustment Range: 20 dBm Source Impedance: 50 ohms, nominal Output VSWR: ≤ 2:1 Sweep Operation Method: Digitally controlled continuous or step and lock Mode: Automatic recycle, single sweep or single step Increments: Selectable 1, 10 or 100 MHz Sweep Time: 10 rates in 1-2-5 sequence, approx. 1 msec/step to 1 sec/step (unlocked sweep) Sweep Trigger Input: TTL low to initiate single sweep or single step Pulse/Square Wave Modulation Repetition Rate: 1 kHz Fixed or Variable (ranges 100 Hz to 5 kHz and 1 kHz to 50 kHz) Pulse Width: 1 μsec Fixed or Variable (0.1 to 10 μsec) On/Off Ratio: >30dB Rise/Fall Times: <25 nsec Overshoot, Undershoot and Ringing: ±2 dB, max Settling Time: ≤ 100 nsec Sync Output: TTL level modulation waveform External: TTL level signal, 10 Hz to 1 MHz, 0.1 μsec min width, rising or falling edge triggering General Specifications Remote Interface: IEEE STD 488-1978 - All front panel controls and readouts except variable modulation rate and width Operating Temperature Range: 0 to 50º C Warm-up Time (to meet all specifications): 20 minutes, max Payment:Payment must clear before shipping. Shipping On This Item: Shipping & Handling can be calculated using the shipping calculator. USA shipping with FedEx (No PO Boxes). No International Shipping. See calculator for available options. Shipping address must match "bill to" address. Return Policy: This item may be returned within 30 days from the date you receive your order for refund of auction sale price. Shipping & Handling fees are non-refundable. Feedback Policy: When the customer is satisfied with a purchase and leaves positive feedback then we are more than happy to leave feedback in kind. Please contact us FIRST if there is a problem or concern. Photo gallery click to enlarge

Price: 1999.95 USD

Location: Phoenix, Arizona

End Time: 2024-03-19T16:33:29.000Z

Shipping Cost: N/A USD