Description: Hardwood Tuning Pin Bushings Gemm Piano Supply For repairing pianos by replacing old worn pin bushings. I also have used these to fill guitar tuning machine holes that have been mis-drilled or need reduced in size. Genuine US hardwood instructions below. 7/16" diameter 1/4" center hole. 3/8" high. 25 in Pkg. When removing old bushings, avoid using a metal punch to tap out or install tuning pin bushings, using it will chip the lacquer finish of the plate. Caution: Be extremely careful when wielding your hammer in the vicinity of the struts of the cast iron plate.Finish tapping in bushing using a wooden punch the same diameter as bushings.A depth gauge for your drill bit should be made and used. It is recommended using tape instead of a metal depth gauge. The tape will be less likely to mar the finish of the plate.Either masking tape or electrical tape works well for the job. Change tape often to avoid the tape bunching up. Note: Many pianos manufactured since the mid-60's have used Tuning Pin Bushings with a smaller diameter. Select the correct size of the tuning pin bushing by measuring your old bushing before ordening, we have various sizes. 345A 13/32" diameter, 7/32" center hole, 1/4" high. 346A 7/16" diameter, 1/4" center hole. 1/4" high. 346C 7/16" diameter, 1/4" center hole. 3/8" high. For your convenience, we offer combined shipping on select items. Simply add the items to your shopping cart and combined shipping discount will be automatically applied.
Price: 6 USD
Location: Leawood, Kansas
End Time: 2024-11-05T15:10:38.000Z
Shipping Cost: 4.25 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Gemm Piano Supply
Type: Piano Tuning Bushings
Unit Type: Unit
Item Height: 3/8”
Qty: 19
Color: Natural Hardwood
For Instrument: Piano
MPN: GPS-346C-25
Item Length: 1/4” ID
Country/Region of Manufacture: United States
Unit Quantity: 1 Pkg.
Item Width: 7/16” OD
