Description: Welcome to our store! To avoid you buying the wrong parts, DO CHECK the compatible chart above before placing order. Choose a vehicle from the "My Garage" list. Or Enter your vehicles details with Year / Make / Model / Trim / Engine. Or Contact us: Ask us for double check. Fitment for:Lexus RX330 2004-2006 Rear Driver & Passenger Side Suspension Strut AssemblyLexus RX350 2007 Rear Driver & Passenger Side Suspension Strut AssemblyToyota Highlander 2004-2007 Rear Driver & Passenger Side Suspension Strut Assembly Recommended replacement cycle: Since the average annual distance of the car is 20,000 kilometers, and the shock absorber needs to be replaced in pairs, the replacement frequency is obtained every 4 years. In fact, the replacement frequency will vary depending on the car condition, road condition and shock absorber manufacturer.When driving a certain number of kilometers, we should take corresponding measures to ensure our driving safety.20.000km: Please check your shock absorber80.000km: Need to replace your shock absorber100.000km: Please replace your shock absorber as soon as possible The following methods can be used to check whether the shock absorber works well:Under normal circumstances, oil leakage in the shock absorber means that there is a problem with your shock absorber. You should repair it at this time to avoid abnormal operation of the shock absorber.Press the bumper firmly, and then release it. If the car jumps 2 or 3 times, it means that the shock absorber is working well.When the car is driving slowly and braking urgently, if the car vibrates violently, it means there is a problem with the shock absorber.The car stops after driving 10km on the road with poor road conditions and touches the outer shell with your hands. If the temperature is not high enough, it means that there is no resistance inside the shock absorber and the shock absorber does not work. At this time you should know if it is time to replace the shock absorber. Precautions for replacing the shock absorber:When installing a new shock absorber, you should pay attention to whether the model matches, please pay attention to the matching model list before purchasing, and confirm whether the left and right are correct.Check the quality status of the new shock absorber, such as whether there is oil leakage in the appearance, etc., pay special attention to the surface of the piston not to be bumped.Professional tools must be used during installation, and the shock absorber must not be forcibly installed.Pay attention to whether the installation position between the shock absorber and the body and the car is correct.During the assembly process, be sure to protect the surface of the piston rod, and avoid using tools to pull the piston rod or bump or scratch the piston rod, otherwise the shock absorber will leak oil.All nuts should be new and tightened according to the specified parameters of the vehicle to ensure that the tightening torque of the connection part meets the specified parameters of the vehicle.When tightening the nuts of the connecting part, it should be carried out in the natural state of the tire and meet the specified parameters of the vehicle. Installation Guideline:Make sure you need new shocks. Purchase new shock absorbers.Consider upgrading your shocks.Jack your vehicle in an appropriate location.Check the shock mountings and spray them with metal cleaner.Remove bolts from the shock tower. Disconnect the shock from the suspension.Remove the shock absorber from the bottom and top bolts.Fit the new shock back onto the suspension control arm. If needed, you may once again affix the anti-roll bar if you removed it earlier.Check your torque specs in the service manual.Repeat the steps to replace the other 3 shock absorbers, if necessary. Item SpecificsUPC Does not applyBrand ZoneMotiveItems Included Shock Aborber,Boot,Bumper Kit,Spring Seat,Coil Spring,IsolatorType Complete Strut AssemblyPlacement on Vehicle Rear, Left, RightFeatures SealedShock Absorber System Double PipeManufacturer Part Number 11869886Manufacturer Warranty 1 YearPerformance Part YesUniversal Fitment NoVintage Car Part NoInterchange Part Number 172213,172214Fitment Type Direct ReplacementAdjustable NoIncluded Hardware NoneSurface Finish Powder CoatQuantity 2 piecesPlatform UniversalOE Spec or Performance OE SpecCustom Bundle YesGas Charged Shock YesModified Item NoSingle Weight(KG) 17.6Size Single Dimension(CM) 77.50(length)*45.00(width)*25.00(height)Compressed Length (in.) 17.320Extended Length (in.) 24.310Mounting Style Screw-OnMaterial Steel About Us: We are committed to making the best auto-parts products and providing you with better services. So if you have any quesiton or problem, please fell free to contact us about that. Payment: Paypal only. Shipping: 2-8 working days in transit. Product will be shipped within 2 business days after full payment is received and verified. USPS, UPS, FedEx shipping will be provided. Delivery time is about 2-8 business days to most of addresses. Returns: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. 30-day free return provided. Contact Us: Any quesiton or problem, do contact us please. We are always online to answer. Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
Price: 132.49 USD
Location: Ontario, California
End Time: 2024-12-03T22:42:59.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
UPC: Does not apply
Brand: ZoneMotive
Items Included: Shock Aborber,Boot,Bumper Kit,Spring Seat,Coil Spring,Isolator
Type: Complete Strut Assembly
Placement on Vehicle: Rear, Left, Right
Features: Sealed
Shock Absorber System: Double Pipe
Manufacturer Part Number: 11869886
Manufacturer Warranty: 1 Year
Performance Part: Yes
Universal Fitment: No
Vintage Part: No
Interchange Part Number: 172213,172214
Fitment Type: Direct Replacement
Adjustable: No
Included Hardware: None
Surface Finish: Powder Coat
Quantity: 2 pieces
Platform: Universal
OE Spec or Performance: OE Spec
Custom Bundle: Yes
Gas Charged Shock: Yes
Modified Item: No
Single Weight(KG): 17.6
Size: Single Dimension(CM) 77.50(length)*45.00(width)*25.00(height)
Compressed Length (in.): 17.320
Extended Length (in.): 24.310
Mounting Style: Screw-On
Material: Steel
