Description: This FNIRSI 1013D Plus 7" oscilloscope is new in box. It has a tablet interface, and comes will the pictured accessories. Additional details from the manufacturer: 【Highly Professionalized Oscilloscope】 The Fnirsi 1013D oscilloscope is equipped with 2 input channels that have 1MΩ input impedance, capable of measuring two distinct signals simultaneously. With complete trigger function(single/normal/automatic) , it is not only suitable for ind-depth analysis and comparison of different input/output signals, but also can be used for both periodic analog signals and aperiodic digital signals. 【High-tech Hardwares】The 7 inches, 800 * 480 resolution, bright colors and high contrast screen makes all the data easy for you to read. It is ultra-thin and easy to carry. With built-in high-voltage protection module, the oscilloscope can tolerate a continuous voltage of up to 400V. The built-in 6000mAh high-performance lithium battery allows you to use continuously for 4 hours after fully charged. The capacitive touch screen, gesture operation and cursor measurement function makes you easy to operate. 【Powerful Waveform Manager 】There is a waveform manager in oscilloscope，allowing you easy thumbnail browsing, viewing, page turning, zooming in &out and data storing. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data. The XY display generates Lissajous figures, facilitating amplitude, frequency, and phase comparisons between two input signals. Additionally, the USB image export feature simplifies sharing captured data with computers for further analysis. 【Fully Trigger Functionality】 The oscilloscope supports automatic, single, and normal trigger modes, catering to different testing scenarios. It can detect non-periodic bursts, digital logic signals, and periodic analog signals, providing versatility in waveform capture. 【One Key Auto Adjustment】 With an efficient blur control algorithm, the oscilloscope swiftly auto-adjusts the waveform, accurately centering it on the screen. This one-key auto-adjustment significantly reduces setup time, making it a valuable time-saving feature. FNIRSI 1013D OSCILLOSCOPE SPECIFICATIONNumber of Channel2Bandwidth100MHzSample Rate1GSa / sTimebase50S / div~10nS / divVertical Sensitivity50 mV / div~500 V / divInput Impedance1M ohmTrigger ModesAuto / Normal / SingleTrigger TypesRising Edge / Falling edgeCouplingDC / ACHighest Test Voltage1X : 40V / 10X : 400VCursorPosition XY / Trigger YWaveform ManagerSupport (1000 pic +1000 waveform)Frequency Precision±0.01%USB ExportSupportPower Supply6000 mAh lithium battery
Price: 129 USD
Location: Lexington, Kentucky
End Time: 2024-11-22T04:08:48.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
External trigger voltage: 0 – 40 V
Power Source: Lithium Battery
Horizontal time base range: 50S/div ~ 10nS/div
Vertical sensitivity: 50 mV/div ~ 500 V/div
MPN: 1013D Plus
Maximum Real-Time Sampling Rate: 1 GSa/s
Maximum Bandwidth: 100 MHz
Charging Time: 95 minutes
Oscilloscope Type: Digital Oscilloscope
Unit Type: Unit
Number of Channels: 2
Input resistance: 1M
Features: Handheld/ Portable, With Probe, With USB
Analog band width: 100MHz * 2
Digital Oscilloscope Resolution: 8-bit
Trigger mode: Single, Normal, Auto
Coupling mode: AC/DC
ADC precision: 8bits
Operating: Capacitive touch screen + gesture
Brand: FNIRSI
Battery Capacity: 6000 mAh lithium battery
Trigger edge: Rising edge/Falling edge
Model: FNIRSI-1013D Plus
Country/Region of Manufacture: China
Maximum test voltage: 40 V (1X probe), 400 V (10X probe)
Extension ports: USB picture export
Storage depth: 240Kbit
Display: 7 inch - 800*480
