Fluke Networks DSX-8000QOI Cat8 Cable Certifier OLTS & OTDR CFP-QUAD OFP-QUAD

Description: The Following Items Are Included: Fluke Networks Versiv Mainframe (BC# 6544A-L/T*) Fluke Networks DSX-8000 Cat8 Cable Analyzer Module (BC# 32291-L/T*) Fluke Networks Versiv Remote (BC# 6544B-L/T*) Fluke Networks DSX-8000 Cat8 Cable Analyzer Module (BC# 32292-L/T*) (2) Fluke Networks CFP-QUAD Certifiber Pro SM MM OLTS Modules (BC# 32173-L/T* 32172-L/T*) SM Source: 1310nm 1550nm MM Source: 850nm 1300nm Power Meter: 850nm 1300nm 1310nm 1550nm Visual Fault Locator Fluke Networks OFP-QUAD OptiFiber Pro SingleMode MultiMode Quad OTDR Module (BC# 32293-L/T*) SM OTDR Source: 1310nm 1550nm MM OTDR Source: 850nm 1300nm Visual Fault Locator Fluke Networks FI-1000 Fiber Inspector Probe Microscope w/ Case LC Tip U125 Tip U25 Tip FS Tip (2) Fluke Networks DSX-CHA804 Cat 8 Channel Adapters Fluke Networks VERSIV-ADP-WIFI Adapter (2) Fluke Networks DTX-AXTERM Modules (2) Fluke Networks 4674269 Link Adapters DSX-8000 Getting Started Guide Optifiber Pro Getting Started Guide (2) SM SC-LC Fiber Cables SM LC-LC Duplex Fiber Cable (2) Fluke Networks SMC-9-SCLC Fiber Launch Cables (2) Fluke Networks MMC-50-LCLC Fiber Launch Cables (2) MM LC-LC Duplex 50 Micron Fiber Cables (2) MM SC-LC Duplex 50 Micron Fiber Cables (6) LC Connectors (4) LC Connectors SC-SC Fiber Connector LC-LC Fiber Connector (2) RJ11/45 Universal Adapters (2) Fluke Networks 50 UM Mandrels (2) Earbuds Fluke Networks Quick Clean 1.25mm Fluke Networks Quick Clean 2.5mm (2) AC Adapter/Chargers USB PC Interface Cable User Manual On CD-ROM (2) Straps For Units Carrying Case BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! Fluke Networks DSX-8000QOI Cable Analyzer KitFluke Networks Versiv Mainframe & Remote w/ DSX-8000 Cable Analyzer Module Set w/Fluke Networks CFP-QUAD Certifiber Pro SM MM OLTS Module Set&Fluke Networks FI-1000 Fiber Inspector Probe MicroscopeThis Kit Includes The Fluke Networks VERSIV-ADP-WIFI Adapter for connecting wirelessly to Fluke Network's LinkWare LiveTest & Certify Cat5, Cat5e, Cat6, Cat6a & Cat8 Cabling Installations up to 2 GHz!CertiFiber Pro OLTS complies with all applicable cabling standards, which call out the new Encircled Flux launch condition requirements for optical sourcesIncludes Carrying Case & Accessories As Listed Above! Working Condition: ExcellentCalibrated: YesCondition: RefurbishedWarranty: 1 YEAR WARRANTY Fluke networks DSX-8000 Cable Analyzer The DSX CableAnalyzer Series copper test solution enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you’ll be. Unfortunately, there are a lot of things that slow the process down – setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand. As part of the Versiv cabling certification product family, the DSX CableAnalyzer Series provides accurate, error-free certification. In the installation business there are multiple teams, varying media types and multiple testing requirements. The difference between being profitable or not is just a few percentage points. The DSX certifies copper cabling, complies with all standards including Level VI/2G accuracy, making jobs easier to manage, and getting to system acceptance faster. It’s not just for the expert technicians and Project Managers. Individuals of various skill levels can improve the set-up, operation, test reporting, and simultaneously manage diverse projects. Unique features: Versiv enables users to accomplish more than ever with a cable tester, by accelerating every step of the testing process LinkWare Live cloud service lets the Project Manager remotely set up the testers, monitor job progress and even locate tester from any smart device ProjX™ management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time Taptive™ user interface puts advanced data analysis and easy set-up and operation at the fingertips of technicians of all skill levels LinkWare PC management software provides unmatched analysis of test results and professional test reports The DSX reduces the time required to fix cabling faults with dedicated diagnostics, a simple test that locates the problem Performance: Eight second Cat 6A test time contributes to the fastest way to gain certification Graphically displays the source of failures including crosstalk and distance to shield faults for faster troubleshooting Manage up to 12,000 Cat 6A test results with full graphics Capacitive touchscreen allows quick tester setup with easily selectable cable types, standards and testing parameters Over 1 billion links reported on LinkWare PC management software Standards: Compliant with ANSI/TIA-1152-A Level 2G and proposed standard IEC 61935-1 Ed. 5 Level VI field tester accuracy requirements to 2000 MHz Supports the complete suite of Resistance Unbalance standards needed for Power over Ethernet (PoE) – IEEE 802.3bt, ANSI/TIA/EIA-568, ISO/IEC 11801 series documents TCL and ELTCTL measurements compliant to IEC 61935-1-1 (Draft) Screen continuity along path of cabling Versiv Platform is Ready for Today's and Tomorrow's Jobs Electrically centered plug design is compliant with TIA Level 2G and IEC Level VI accuracy requirements to 2000 MHz with a future-ready design to support all hardware upgrades The DSX CableAnalyzer Series enables cable testing and certification for network deployments up to 40 Gigabit Ethernet – whether it is an existing Cat 5e, 6, 6A, 8 or Class I/II cabling system, the DSX tests to all industry standards. The electrically centered test plug results in the Level 2G/VI accuracy required to support field testing to Cat 8 / Class I/II, 2000 MHz. The DSX exceeds the IEC Level VI and TIA Level 2G specifications assuring you of higher confidence in results over the full frequency range. Higher performance cabling systems like Cat 8 require more precise measurement to ensure they are providing the noise immunity required by 25G and 40G applications. Additionally, complex Alien Crosstalk link-to-link certification is simplified by integrating the measurement capability into each copper module up to 40GBASE-T testing. The DSX is the first field tester to support balance measurements including Transverse Conversion Loss (TCL) and Equal Level Transverse Conversion Transfer Loss (ELTCTL). TCL and ELTCTL are important measurements found in the cabling standards. They define a minimum performance for balance, a key parameter to help determine noise immunity. Industrial network owners/operators are especially interested in this property due to the higher level of electromagnetic interference (EMI) within the industrial environment. Fluke Networks' DSX CableAnalyzer Series has obtained Intertek (ETL) verification in accordance with the ANSI/TIA-1152-A specification for Level 2G test equipment. (Report on file.) ProjX Management System Manages Complex Jobs with Ease Manage up to 12,000 Cat 6A test results with full graphics Managing the testing of multiple jobs with multiple teams, testers, and requirements is time consuming and a source of errors. Increasingly larger jobs make project organization more important than ever. The ProjX management system on the DSX CableAnalyzer Series provides individual project files for all job specific details to be saved under a simple name, eliminating the need to re-enter job specific details after starting a project. This minimizes set-up errors or lost files when switching from one job to another or utilizing multiple testers on a single job. In addition, it provides test results by cable ID, merges any changes without duplicates and defaults to the last copper or fiber module installed. ProjX management system provides real time status to completion on each job with a 0-100% scale and gives the operator the option to isolate any test requiring a second look and helps to assure nothing is overlooked. The "Fix Later" selection creates a punch list or automatic to do list for correcting any workmanship issues. ProjX enables project managers and crew leaders to be truly efficient. Taptive User Interface Simplifies Set Up, Eliminates Errors and Speeds Troubleshooting Capacitive touchscreen allows quick tester setup and supports all standards Taptive user interface is easy enough for even the newest technician to perform tests across multiple media types and testing requirements. The capacitive Taptive user interface makes all jobs easily accessible from the menu screen. Touch the job you’re working on and the large display confirms the test that needs to be performed, animated instructions simplify setting the configuration making correct testing assured. Performs with Unsurpassed Speed Eight second Cat 6A test time and the fastest way to submit your certification results No tester offers so much speed for so many tests. Complete copper certification to Cat 6A in 8 seconds or certify two fibers at two wavelengths in just 3 seconds. Endorsements by cabling vendors worldwide assure that Versiv is the fastest way to project completion and system acceptance. Quickly get a Pass or Fail result and easily review individual test parameters by value or drill into specific area on a graph. Troubleshoot Like an Expert Graphically displays the source of failures including crosstalk and distance to shield faults for faster troubleshooting The DSX reduces the time required to fix cabling faults with dedicated diagnostics, a simple 1 button test runs all tests and saves all data. The graphical results screen allows you to look down the cable to see exactly where any cross talk, return loss or shield faults are located on any given link. Previous testers had frequency limits of their diagnostic capabilities of up to 250 MHz only, but the DSX CableAnalyzer Series removes this limitation. This common view is easily interpreted by novice and expert users alike to isolate and act on any failed results quickly and is stored with the test result for remote analysis. Shield continuity historically is a direct current (DC) measurement with no distance to fault available. Other testers run a simple resistance test to verify that the shield has continuity. These tests have been shown to be inaccurate, sometime confusing a ground path as shield continuity and not correctly identifying a break in the shield. Other testers may tell you there is a break in a shield, but not pinpoint the exact location giving no indication of where to start rework. The DSX CableAnalyzer Series is the first field tester to report distance to any shield integrity issues, reporting the true status of the screen continuity. This is especially important in datacenters and Cat 8 installations where screen continuity is critical to maintaining alien crosstalk performance of screened cabling. DSX CableAnalyzer Series Family The DSX CableAnalyzer Series family is based on two modules: the DSX-5000 and DSX-8000. The DSX-5000 certifies twisted pair Cat 5e, 6, 6A and Class FA cabling with limits up to 1000 MHz. The DSX-8000 certifies twisted pair Cat 5e, 6, 6A, Cat 8 and Class I/II cabling with limits up to 2000 MHz. Copper Certification DSX-8000 CableAnalyzer DSX-5000 CableAnalyzer™ Cat 6A / Class EA test time 8 seconds 10 seconds Cat 8 / Class I/II test time 16 seconds - HDTDX/HDTDR diagnostic test times ≈ 3 seconds ≈ 3 seconds Internal memory ≈ 5,000 Cat 8 with plots; ≈ 12,000 Cat 6A with plots ≈ 12,000 Cat 6A with plots >Level V Accuracy (1 GHz) Yes Yes Level VI/2G Accuracy (2 GHz) Yes No Resistance Unbalance measurement Yes Yes Shield integrity check and distance to fault Yes Yes TCL measurement Yes Yes ELTCTL measurement Yes Yes CDNEXT measurement Yes Yes CMRL measurement Yes Yes Built-in Alien XTalk capability Yes Yes Channel Adapter 2 GHz Range 1 GHz Range Permanent Link Adapter 2 GHz Range 1 GHz Range LinkWare Live LinkWare Live is a cloud-based service that lets you manage certification jobs anytime, anywhere, with anyone on any device. With LinkWare Live, you can Keep track of every test on every job. Get an overview of every project from any smart device. Drill down to each individual test. Instantly receive notification of incorrect test setting or cable IDs Get it right the first time. Define cable IDs and test settings from your PC or tablet. Then send them to the testers or Brother printers at the jobsite for mistake-free testing and labeling. Keep your testers up to date. Standards can change without notice, and an out-of-date test report can mean hours of retesting. LinkWare Live automatically ensures your testers are running the latest. Stop wasting time and gas driving testers back to the office. Upload your test results straight from the job site to LinkWare Live over Wi-Fi. Then download them automatically to the right job for fast report generation with LinkWare PC. Avoid Project Delays. Track the last used location and monitor the status of all testers to ensure they are always calibrated and running the latest firmware Supports all Versiv models: DSX CableAnalyzer Series, CertiFiber Pro, OptiFiber Pro, and the FI-7000. LinkWare PC Management Software Leveraging the popular and multi-featured LinkWare PC management software application, DSX CableAnalyzer Series users can easily access the ProjX management system data, generate reports, and upgrade the software in their testers. Project Managers have full capabilities to manage workflow and consolidate test results. Users can provide the finishing touch by adding their company logo to the report and offer it unaltered to their customers for system acceptance purposes. Keep your business tools simple, no matter which Fluke Networks copper or fiber tester you are using, LinkWare PC is the software package that reports it all. Now with LinkWare Stats, the new automated statistical report option, you can move above and beyond the page-per-link report and see your entire cabling infrastructure. It analyzes and transforms LinkWare PC test results data into charts and diagrams that reveal your cabling plant performance; this report summarizes your entire cabling infrastructure in a compact, graphical format that makes it easy to verify margins and to spot anomalies. Specifications: cable Types Shielded and unshielded pair LAN cabling TIA Cat 3, 4, 5, 5e, 6, 6A, 8: 100 Ω ISO/IEC Class C, D, E, EA, F, FA and I/II: 100 Ω and 120 Ω Standard Link Interface Adapters Permanent link adapters Plug type: shielded RJ45 Optional Plug type: Tera (for DSX-5000 only, DSX-8000 version available summer 2017) Channel Adapters Jack type: shielded RJ45 Optional Jack type: Tera, GG45 (for DSX-5000 only, DSX-8000 version available summer 2017) Test Standards TIA Cat 3, 4, 5, 5e, 6, 6A, 8 per TIA 568 Series ISO/IEC Class C, D, E, EA, F, FA, I/II certification per ISO/IEC 11801 Series Maximum frequency DSX-8000: 2000 MHz; DSX-5000 1000 MHz General Specifications Autotest Time DSX-8000: Full 2-way Autotest of Cat 5e or 6/Class D or E: 7 seconds Full 2-way Autotest of Cat 6A/Class EA: 8 seconds Full 2-way Autotest of Cat 8: 16 seconds Support test parameters (The selected test standard determines the test parameters and the frequency range of the tests) Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss (Attenuation), Return Loss (RL), NEXT, Attenuation-tocrosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (ELFEXT), Power Sum NEXT, Power Sum ACR-N, Power Sum Alien Near End Xtalk (PS ANEXT), Power Sum Alien Attenuation Xtalk Ratio Far End (PS AACR-F) Input protection Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage Display 5.7 in LCD display with a projected capacitance touchscreen Case High impact plastic with show absorbing overmold Dimensions Main Versiv unit with DSX module and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm) Weight Main Versiv unit with DSX module and battery installed: 3 lbs, 5oz (1.28 kg) Main unit and remote Lithium ion battery pack, 7.2 V Typical battery life 8 Hours Charge time* Tester off: 4 hours to charge from 10 % capacity to 90 % capacity Languages supported English, French, German, Italian, Japanese, Portuguese, Spanish, Chinese, Korean, Russian, Trad Chinese, Czech, Polish, Swedish, Hungarian Environmental Specifications Operating Temperature 32° F to 113° F (0° C to 45° C) Storage Temperature -22° F to +140° F (-30° C to +60° C) Operating relative humidity (% RH without condensation) 0% to 90%, 32° F to 95° F (0° C to 35° C) 0% to 70%, 95° F to 113° F (35° C to 45 °C) Vibration Random, 2 g, 5 Hz-500 Hz Shock 1 m drop test with and without module and adapter Safety CSA 22.2 No. 61010, IEC 61010-1 3rd Edition Operating altitude 13,123 ft (4,000 m) 10,500 ft (3,200 m) with ac adapter EMC EN 61326-1 Fluke Networks Certifiber Pro Optical Loss Test SetInstalling a high performance fiber optic cabling system starts with systems design and ends with systems acceptance. Certifying cabling to industry performance standards is a core element of the process. The faster it goes, the more profitable you’ll be. Unfortunately, there are a lot of things that slow the process down - setting the tester up incorrectly, testing to the wrong limits, dirty fiber endfaces causing testing failures, waiting for lead technicians to analyze or troubleshoot failures, misinterpretation of results, and test reports that customers can't understand.The CertiFiber Pro Optical Loss Test Set (OLTS) helps cabling professionals accomplish more than ever. It's all about accurate, error-free certification, making jobs easier to manage and certifying fiber optic cabling to industry standards, faster. CertiFiber Pro OLTS complies with all applicable cabling standards, which call out the new Encircled Flux launch condition requirements for optical sources. It's not just for the expert technicians and Project Managers. Individuals of various skill levels can improve the set-up, operation, test reporting, and simultaneously manage diverse projects.Features: Versiv enables users to accomplish more than ever with a cable tester, accelerating every step of the testing process ProjX management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of technicians of all skill levels LinkWare PC management software provides unmatched analysis of test results and professional test reports LinkWare Live allows you to manage results and the testing process from your smart devices. Detailed View of Fiber Loss ResultsView the results of each fiber tested at the same time and the Pass/Fail status on the test results screen. Easily identify the fiber type, test limits, loss and which fiber correlates to each result. All good results are highlighted with a green icon, any faulty events are highlighted with red icons and fibers are identified as output or input to facilitate quick identification and corrective action. The Taptive user interface also makes the results screen a powerful tool with a detailed window which can be touched to drill down and see detailed results.Double Ended Fiber Optic Endface CertificationFiber optic connector end-face contamination is a leading cause of fiber failures. Dirt and contaminants cause insertion loss and back-reflection that inhibit optical transmission and causes havoc with transceivers. Fiber loss testing can expose this problem, but in many cases, dirty connections make fiber testing time consuming and inaccurate. Since dirt can be an issue before, during, or after fiber optic certification testing, and migrate from one fiber optic connector end-face to another upon mating, both sides of any connection must always be cleaned and inspected.CertiFiber Pro provides double ended fiber optic inspection capability through the use of 2 Versiv Main units. One unit acts as the normal CertiFiber Pro main and the 2nd unit functions as a Remote unit. Using a Main unit as a Remote provides a touchscreen interface at the remote end giving you the ability to visually inspect fiber endfaces!CertiFiber Pro’s double ended fiber optic inspection capability allows you to inspect and certify fiber optic connector end-faces at both ends of your fiber link in less than a second so you can get your job done the first time. This double ended fiber optic inspection capability provides automated PASS/FAIL certification take the guess work out of fiber inspection so anyone can be a fiber expert.Create, Manage and Select ProjectsAs part of the Versiv family, the CertiFiber Pro OLTS incorporates ProjX to ease job set-up, minimize test limit errors and better manage multiple projects. Project managers and technicians can create new projects for different jobs, locations or customers and or easily define project requirements for each job ahead of time – including all tests parameters and cable IDs – then keep track of job progress. All project detail information is stored in LinkWare for easy transfer to other Versiv cabling certification testers.The ProjX management system allows project specifications to be loaded and saved into the tester ahead of time. As the tester moves from job to job, the project list is easily accessible and users can quickly see detail data such as percentage of links tested, percentage to completion and percentage of results exported.Dynamic Project and User Profile ManagementCertiFiber Pro increases efficiency by allowing field technicians access to project based settings entered at the time of set-up. This minimizes set-up errors or lost files when switching from one job to another or utilizing multiple testers on a single job more. Setting limits and establishing cable ID sets is easy with the Taptive user interface. And once the technicians start testing, the progress of each project is easily monitored.ProjX™ Management System specific benefits are: Real time status to completion on each job 0-100%, giving the operator the “Fix Later” option to isolate any test requiring a second look and helps to assure nothing is overlooked. The "Fix Later" selection creates a punch list or automatic "to do" list for correcting any workmanship issues.Managing the testing of multiple jobs with multiple teams, testers, and requirements is time consuming and can be hard to manage. Increasingly larger jobs make project organization more important than ever. The new ProjX management system on the CertiFiber Pro assigns a name for all job specifics. This eliminates the need to ever have to re-enter test limits or other job details after starting a project or returning to it after a different job. This minimizes set-up errors or lost files when switching from one job to another or utilizing multiple testers on a single job, enabling project managers and crew leaders to be more efficient.Specifications: Power Meter Specifications Input Connector Interchangeable connector adapter (LC standard, SC, ST and FC optional) Detector Type InGaAs Wavelengths 850 nm, 1300 nm, 1310 nm, 1550 nm Power Measurement Range 0 dBm to -65 dBm (850 nm) 0 dBm to -70 dBm (all other wavelengths) Power Measurement Uncertainty < +/- 5% +/- 32 pW Measurement Linearity < ± 0.1 dB Loss/Length Specifications Specification CertiFiber Pro Multimode Modules CertiFiber Pro Singlemode Modules Testing Speeds (excludes referencing times) Smart Remote mode: < 3 seconds (2 wavelengths, one direction, auto wavelength detection)Far End Source mode: ≤ 2 seconds (2 wavelengths, one direction auto wavelength detection)Loopback mode: ≤ 2 seconds (2 wavelengths, one direction auto wavelength detection) Input/Output Connectors Interchangeable connector adapter (LC standard, SC, ST and FC optional) Launch Condition Encircled Flux compliant to TIA-526-14-B, ISO/IEC 14763-3 and IEC 61280-4-1 Fiber Types Tested 50/125 µm or 62.5/125 µm singlemode Source Type and Wavelengths LED source 850 nm ± 30 nm 1300 nm ± 20 nm Fabry-Perot laser diode 1310 nm ± 20 nm 1550 nm ± 30 nm Maximum Length Measurement 12 km 130 km Length Measurement Accuracy ± 1.5 m plus ± 1 % of length Output Power (Nominal) ≥ -24 dBm with EF-TRC ≥ -4 dBm Output Power Stability ± 0.05 dB over 8 hours ± 0.03 dB over 15 minutes ± 0.1 dB over 8 hours ± 0.08 dB over 15 minutes Source Wavelengths 850 nm, 1300 nm, 1310 nm, 1550 nm Power Measurement Range 0 dBm to -65 dBm (850 nm) 0 dBm to -70 dBm (all other wavelengths) Power Measurement Uncertainty < +/- 5% +/- 32 pW Measurement Linearity < ± 0.1 dB Visual Fault Locator (VFL) Output Power Requirement Output Power >-5 dBm<0 dBmSMF-28 singlemode fiberContinuous waveSC/UPC connector Operating Wavelength 650 nm nominal Output Modes Continuous wavePulsed mode (2 Hz to 3 Hz blink frequency) Connector Adapter 2.5 mm universal Laser Safety Class II CDRHOver operating temperature range Environmental Specifications Operating Temperature 0 °F to 113° F (-18° C to 45° C) Storage Temperature -22° F to 140° F (-30° C to +60° C) Operating Relative Humidity (% RH without condensation) 0% to 90%, 32° F to 95° F (0° C to 35° C)0% to 70%, 95 °F to 113 °F (35° C to 45° C) Vibration Random, 2 g, 5 Hz-500 Hz Shock 1 m drop test with and without module and adapters Safety CSA C22.2 No. 1010.1: 1992EN 61010-1 1st Edition + Amendments 1, 2 Pollution Degree 2 Altitude Operating: 4,000 m; storage: 12,000 m EMC EN 61326–1 For full Fluke Networks DSX-8000QI product specifications, please click here: Fluke Networks DSX-8000QI Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou.Inventory and Ecommerce Management

Price: 21795 USD

Location: Southgate, Michigan

End Time: 2024-12-23T01:45:46.000Z

Shipping Cost: N/A USD