Flexible PEI Build Plate For Creality Printer Ender 3(Pro)(V2)(S1)/Ender 5(Pro)

Description: PEI Magnetic Flexible Heated Bed.- Upgraded 3D Printer hotbed surface. Applicable: Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 S1, Ender 5 Pro. Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Compatible with PLA、PETG、PEEK、ABS and other most filaments. No more tape, no more glue, no more shovel, and release your printing anxiety Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. How to choose the suitable 3D Printer Build Plate? Smooth PEI Build Plate PC Spring Steel Magnetic Removable Magnetic Build Surface Carborundum Glass Standard configuration of the printer None Ender-3S1/Ender-3V2NEO, Ender-3S1 Plus Ender-3 Pro Ender-3V2, Ender-5PLUS, Ender-3Neo, Ender-3Max (Neo), CR-10Smart etc,. Max-temperature Recommended 80°C(Support printing at 100°C; it is generally recommended to keep it at or below 80°C, and it will lose its magnetism if it is used for a long-time above 80°C) Recommended 80°C(Support printing at 100°C; it is generally recommended to keep it at or below 80°C, and it will lose its magnetism if it is used for a long-time above 80°C) Recommended 80°C.(Support printing at 100°C; it is generally recommended to keep it at or below 80°C, and it will lose its magnetism if it is used for a long-time above 80°C) Max_400℃（Normally Printing Setting is around 110℃） Build Surface PEI stick film PC Coating PC Coating Tempered Glass Composite Coating The effect of the bottom surface of the model Flat and Smooth slightly rough texture slightly rough texture Flat and Smooth Bed Adhesion Great for PLA, TPU, WOOD, PLA-Wood, PETG etc,. Great for PLA, TPU, WOOD, PLA-Wood, PETG, ABS, PC, ASA etc, high temperature consumables Great for PLA, TPU, WOOD, PLA-Wood, PETG etc,. Flat and Smooth How to remove the model Remove the model after cooling.For high temperature printing, it is recommended to cool down slightly before taking the model. As the PC Spring Steel has a strong viscosity,①For printing the high-temperature consumables need to cool down 【slightly to not be hot 】 or wear anti-scalding gloves to remove the model. To prevent the sticker fro being torn off after the model removed in the cools down in some cases.②For printing smaller models or models with a very low height, it is recommended to add brim when printing to facilitate removal of the model Remove the model after cooling.For high temperature printing, it is recommended to cool down slightly before taking the model. Remove the model after cooling.For high temperature printing, it is recommended to cool down slightly before taking the model.

Price: 29.95 USD

Location: CA/KY/NJ/NY

End Time: 2023-11-21T10:34:25.000Z

Shipping Cost: 0 USD