Fits 09-23 Dodge RAM Billet Catch Can 5.7 Any HEMI Transmissions

Description: Dodge RAM Billet Catch Can 5.7L HEMI all Transmissions Item Finish: Show Quality Satin Finish Fits Models: Dodge RAM Trucks equipped with 5.7L 6.4L HEMI ( Fits all Transmissions ) Item Specifications:6oz Capacity UPR Billet Catch CanUPR Z Bracket MountUPR Hi-Flow Nickel Fittings ($20 upgrade FREE)UPR Patented Diffuser Upgrade ($40 upgrade FREE)UPR Continental Braided Hose with UPR Billet Hose Ends ($59 upgrade FREE)New High Volume Internal Design for Maximum Oil ControlKnurled easy open easy close design that you just snug to closeImproves Fuel Economy, Throttle Response, and Overall PerformanceMost Advanced machining processes in Billet Technology™ UPR Catch CansNew Patented 3-Chamber Internal Design for Unmatched Condensing and CoalescingCheck Out the UPR Catch Can Installation Instructions section on the UPRproducts website- UPR Nickel Fittings - UPR Patented Diffuser - UPR Braided Hose - UPR Billet Hose Ends - UPR 1/4 Turn Drain Cock - What is the problem with your PCV system ?The Positive Crankcase Ventilation (PCV) system is used to recycle the gasses that leak or “blow-by” your engines piston rings and create a positive pressure in the crankcase. By venting these gasses along with oil mist/vapor from the crankcase and route it back into the intake manifold so it can be burned off. This is a poor fix from automobile manufacturers because over time the excess oil vapor collects along the inside of the intake tract and forms a “sludge”. This leads to a variety of issues including carbon build up, retarded timing, detonation, power loss and even engine failure. UPR s fix for the PCV system used on many engines for reducing toxic gasses from being released into the atmosphere and eliminating positive crankcase pressure / Blow-By. What does a UPR Catch Can do? UPR s Billet Catch Can / oil-air separator will condense and collect the oil vapor before it has any chance to reach the intake tract. As the gas and oil vapor enters UPR s can they pass through a Chambered filtering system that cools the oil vapor and gives it something to adhere to. Then the oil forms into droplets and collects in the bottom of the UPR Catch Can so that they can later be drained. This is where the additional Chambered filtering system comes into play allowing only the clean air to pass through so it can eliminate unwanted blow-by. All engines have blow by otherwise there would be no need for a PCV system on your engine. PCV = Positive Crankcase Valve, which eliminates Positive Crankcase Pressure. UPR s Catch Can have become one of the most widely used and recommended cures for just about every application.The engine size and horsepower level is not relevant to the performance of the UPR Catch Can. UPR s Catch Cans have become a cornerstone by improving the Performance and Economy on any vehicle you install it on. 2009+ Dodge Ram 1500 Catch Can Installation: ( SEE NUMBER INSTALL IMAGE ) Just a quick install guide for an easy catch can installation. Simply remove the engine cover and theintake tube to locate the PCV hose and see the steps below and remove the hard plastic hose from both ends. 1. This hose end is located at the top rear passenger side of the intake manifold ( remove hose ) 2. Now you will install the supplied barbed 1/2" nickel fitting to connect the catch can hose to 3. This hose end is located at the lower front passenger side of the intake manifold ( remove hose ) 4. Now you will install the supplied barbed 1/2" nickel fitting to connect the catch can hose to 5. Front passenger side of cylinder head you will see the threaded hole next to the freeze out plug. 6. This is where you will install the catch can bracket with the 2 supplied spacers. 7. Now you can install the catch can and get everything lined up and ready for the hoses. 8. The A goes to the front PCV connection and the B goes to the rear PCV connection. 9. Now you can reinstall your engine cover and intake tube and you have the best OIL protection. Install UPR Billet Catch Can on 3.0L 3.6L 3.7L and 4.7L Dodge Rams: You'll need a $5 Simpson Strong-TieA66 12-Gauge Angle Bracket from Home Depotto mount Z bracket on 3.0L 3.6L 3.7L and 4.7L Ram Trucks. Mount sideways along fuse box or battery tray closest to PVC connections. Normal 0 false false false EN-US X-NONE X-NONE Returns are only accepted within 30 days and only if a Return Merchandise Authorization (RMA) has been issued. All returns MUST be brand new and in their original, unopened packaging. (Item returns may be subject to restocking fees) UPR Products reserves the right to refuse any package returned to us without authorization. Returns/Refunds are processed within (30) business days of receipt (not incl. holidays, weekends, transit time, or day package was delivered.) Special order items, item hardware, rebuild kits. replacement parts, emblems or decals are not able to be accepted for return. If a free shipping item is returned, the original outbound shipping will be deducted from the refund. The customer is also responsible for return shipping. If a customer refuses or is not available for an item, they will be charged the return shipping fee by the carrier. If a free shipping item is refused or missed, the outbound shipping will also be deducted from the refund. Changes of address or entering an incorrect address placing an order, the customer is responsible for any address change/correction fees billed by the carrier.

Price: 99.99 USD

Location: Lake Worth, Florida

End Time: 2024-12-27T17:25:49.000Z

Shipping Cost: 0 USD