Description: Eucalyptus Figured Australian (Aussie) "Beeswing" wood veneer 8" x 90" with no backing (raw unbacked veneer). "A" quality grade. 1/42" thickness. One piece per price. All pieces in sequence and matching. *One picture is a sample from similar veneer that is finished with clear semi-gloss polyurethane to show more accurately what the product should look like when basic common finish is applied. Most any other finish or stain could be used for different results. You get unfinished veneer exactly as shown in the other photos. Visit My eBay Store: JSO Wood Products Other sizes and backed veneer may be available. About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness: (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge is typically used. How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish: most any conventional finishing products can be used with veneer that is applied correctly. Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.
Price: 37.5 USD
Location: Louisville, Kentucky
End Time: 2024-02-05T05:28:55.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Eucalyptus Figured Australian wood veneer raw
Model: Figured Australian Eucalyptus 1/42" thickness thin
MPN: 1/42"
Eucalyptus Figure Australian wood veneer: Raw flitch sample 1/42" thickness roll quartered
UPC: Does not apply
