Description: Neutron Series Dual Band Wireless AC1750 Managed Outdoor Access Point The EWS660AP is a high-powered, long-range, 3x3 Dual Band Neutron Series Managed Wireless solution AC1750 802.11a/b/g/n/ac Outdoor Access Point that functions as a stand-alone Access Point or as part of an EnGenius Neutron Series Wireless Management solution. It features a high transmit RF power for better outdoor signal penetration.The EWS660AP can operate as a stand-alone Access Point connecting to third-party PoE-capable switches but more control and versatile management of the Access Point is achievable when it is part of an EnGenius Neutron Series Wireless Network Management solution because the AP includes firmware that enables it to be immediately discovered, configured, m EWS660AP Neutron Series Dual Band Wireless AC1750 Managed Outdoor Access PointTechnical Specifications Hardware RF: 2.4 and 5 GHz Frequency Bands Standard: IEEE 802.11a/b/g/n and ac (draft) Radio I: 11b/g/n: 2.412~2.484 GHz Radio II: 11a/n/ac: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz Data Rate: Up to 450 Mbps in 2.4 GHz; up to 1300 Mbps in 5 GHz Memory: 128MB Flash Memory: 16MB Antenna Array Internal High Gain Antenna Array supporting both 2.4 GHz and 5 GHz Physical Interface 1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) - PoE Capable 802.3at 1 x Reset Button 1 x Power Connector LED Indicators Power WPS WLAN (Wireless Connection) LAN Power Requirements Power Supply: 100 to 240V DC +/-10% 50/60 Hz Active Ethernet (Power-over-Ethernet IEEE 802.3at) DC IN, 12V/2A Modulations OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK Operating Channels 2.4 GHz: US/Canada 1-11 5 GHz: Country dependent for the following ranges: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 Management Topology Infrastructure/Ad-Hoc Operation Modes Access Point Multiple BSSID Supports up to 8 BSSIDs per radio LAN IP (check validity and DHCP server IP range) MAC SSID-to-VLAN Tagging Supports 802.1q SSID-to-VLAN tagging Spanning Tree Supports 802.1d Spanning Tree Protocol Wireless Wireless Mode: 11a/11b/11g/11n Channel selection (settings vary by country) Channel bandwidth (Auto, 20 MHz, 40 MHz) Transmission Rate 2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only 5 GHz: 11n only, 11a/n mix, 11a only QoS WMM (Wireless Multimedia) Wireless Management Features (with Neutron Series Switch) Access Point Auto Discovery and Provisioning Access Point Auto IP Assignment Access Point Cluster Management Remote Access Point Rebooting Access Point Device Name Editing Access Point Radio Settings Band Steering Traffic Shaping Fast Handover Fast Roaming Access Point Client Limiting Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK) VLANs for Access Point- Multiple SSIDs Guest Network Access Point Status Monitoring Wireless Client Monitoring Wireless Traffic & Usage Statistics Real-time Throughput Monitoring Visual Topology View Floor Plan View Map View Secure Control Messaging SSL Certificate Local MAC Address Database Remote MAC Address Database (RADIUS) Unified Configuration Import / Export Bulk Firmware Upgrade Capability Intelligent Diagnostics Management (cont.) Tx Power Control Adjust transmit power by dBm Configuration Web-based configuration (http) Firmware Upgrade Via web browser, settings are reserved after upgrade Administrator Settings Administrator Username and Password Change Reset Settings Reboot (press and hold for 2 seconds). Reset to factory default (press and hold for 10 seconds) System Monitoring Status Statistic and Event Log SNMP V1, V2c, V3 MIB MIB I, MIB II (RFC1213) and private MIB Traffic Shaping Incoming and outgoing wireless traffic shaping Auto-channel Selection Automatically selecting least congested channel Bandwidth Measurement IP range and bandwidth management Auto Reboot Reboot Access Point by minute, hour, day, or week Backup and Restore Save and restore settings through Web interface CLI Supports Command Line Interface Diagnosis IP pinging statistics Log SysLog and Local Log support LED Control On/Off AP Detection Scanning for available EnGenius APs Security WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) 802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP SSID broadcast enable/disable MAC Address Filtering, Up to 50 fields Guest Network L2 Isolation (Access Point mode) QoS (Quality of Service) WMM (Wireless Multimedia) Environmental & Mechanical Temperature Range Operating: -4º~158ºF/-20ºC~70ºC Storage: -22Fº~176ºF/-30ºC~80ºC Humidity (non-condensing) Operating: 90% or less Storage: 90% or less Waterproof IP65-Rated Enclosure Physical Security Kensington Security Slot Certifications FCC, IC Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2014 EnGenius Technologies, Inc. All rights reserved. Dimensions & Weights Package Contents EWS660AP Dual Band AC1750 Outdoor Access Point 12V/2A Power Adapter Pole Mounting Bracket RJ-45 Ethernet Cable Quick Installation Guide Warranty 1 Year
Price: 799 USD
Location: DELHI, DELHI
End Time: 2024-12-12T06:09:43.000Z
Shipping Cost: 99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Model: EWS660AP
Type: access
MPN: EWS660AP
Brand: engenius