Duzzy 20 Inch Flexible Quarter Round Molding, Silicone Rubber Peel and Stick Sho

Description: Duzzy 20 Inch Flexible Quarter Round Molding, Silicone Rubber Peel and Stick Shower Water Barrier Suitable for the Shower Corner or Kitchen Countertop Sink and Cooktop [QUARTER ROUND MOLDING SPECIFICATION] Size: 20 "L x 0.7" W x 0.86"H. Adhesive flexible round molding can be used for interior renovation. It also can be used at the bottom of stairs and caulking of curved columns. Quarter round molding can also be used on curved surfaces.[DURABLE AND FLEXIBLE] The quarter round molding is made of high quality rubber that won't break in long term bending. The surface can be painted, which is practical and beautiful.[OUTSTANDING PERFORMANCE] The long, flexible design. It can be easily cut to the length you need. Easy alternative to regular caulk. Made of high-quality transparent silica gel and environmentally.[EASY TO INSTALL] The molding trim comes with adhesive, you only need to cut it to a suitable length before installation and remove the back tape. The installation can be completed in one minute. (Hot glue can be blown with a hair dryer before installation to increase the stickiness.)[DUZZY ] We are a professional silicone PVC manufacturer, dedicated to researching kitchen/shower water dam. Any issues or needs please feel free to contact us, we will solve the problem within 12 hours. Product Description Are you still annoyed by the overflow of water from the sink?Are you still worrying about water leakage in the shower or bathroom because the threshold is not high enough?Are you still worrying that the greasy gap between the stove and the wall is difficult to clean? You can try to install this water guard at the bottom of the window sill, the gap between the grass sill, the joint and the periphery of the washstand and the wall. While solving the water leakage problem, it also beautified the decoration. Apply to... Threshold Countertop Edge Corner Gap Bathroom Floor How to Install? Clean and measure Clean up the ground. (Place the water dam where it needs to be installed and mark it with a pen.) Cut off the excess part. Peel off the sticker Place the water retaining bar in the position where it needs to be installed. Press hard while tearing off the adhesive. Reinforce with glue Apply glue to the joints between the two ends of the waterproof strip and the desktop/ground. Wait for it to dry naturally. Wait 24 hours to dry Keep dry after installation. Tips When you need to install it as a right-angled edge, you can cut it in the following way. The two sides are cut to 45degree and can be spliced together.

Price: 22.12 USD

Location: Denver, Colorado

End Time: 2024-12-12T14:07:39.000Z

Shipping Cost: 0 USD