Dust Collection Sub-Base with Fittings for Bosch Colt 1.25-HP Router (GKF125CEK)

Description: The B125DC Dust Collection Sub-Base by Print4Function turns the Bosch Colt 1.25-HP Trim Router (GKF125CE) into a joy to use instead of a chore of cleaning up after it. The OEM fixed base does not have any off the shelf dust collection fittings for above and below the sub-base until NOW! The dust collection fittings are sized to accommodate the Bosch VAC005 and Festool D27 (27mm) hose coupling. This package includes a brand new sub-base, three dust collection fittings, and a user manual:- One fitting that attached above the sub-base for buried cuts, dadoes, grooves, etc.- Two fittings that attach below the base for edge features, coves, chamfers, joinery cuts, slots, and much more. One has a bottom for better collection and the other is open to allow for lengthy flush cut bits. *All nuts and bolts needed to attach the fittings to the sub-base are included. Screws to attach the sub-base to the router housing are the original OEM screws and are not included. We sell the base in a variation that allows for standard Porter-cable style threaded bushings and the other variation with the standard 40mm hole as per the OEM sub-base. If you do not use threaded bushings, the 40mm hole will give you more visibility when looking down into the open router housing. The sub-base and fittings are 3D printed in PETG for it's durability, reduced friction, abrasion resistance, and high heat capability (can withstand up to 175°F). The sub-base is printed at 100% infill, meaning it is COMPLETELY SOLID. If you want to take the risk to drill additional holes for other routers, go for it. The dust collection fittings are not solid, but printed to withstand the abuses of the shop on a daily basis. If you have any questions or comments, send us a message, we'd be happy to talk!

Price: 49.99 USD

Location: Huntersville, North Carolina

End Time: 2023-11-12T04:41:41.000Z

Shipping Cost: N/A USD