Duraflex Executive Hood - 1 Piece for Stinger KIA 18-23 edpart

Description: About Store Contact Shipping Feedback Duraflex Executive Hood - 1 Piece for Stinger KIA 18-23 edpart_119842 Notes: Part #: edpart_119842 Make: KIA Model: Stinger Material: FRP Condition: New Description : 2018-2023 Kia Stinger Duraflex Executive Hood - 1 PieceHood pins are required.Hand laid, high quality 6 oz. fiberglassSignature black finishHigh quality weather resistant aluminum mesh grille (where applicable)Proprietary polymer blend for maximum flexibilityIncreased durability and longer service lifeModified AerodynamicsReduced damage rate up to 75%Limited warranty and satisfaction guarantee New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization. Disclaimer Duraflex hoods and hood accessories are aftermarket parts intended exclusively for off-road and show use. These hoods are often lighter than stock versions and may have vented designs, which can lead to increased aerodynamic lift at high speeds. For safety, hood pins or AeroCatch latches are required, as standard hood latches may not provide enough security. Due to the nature of fiberglass and its manufacturing process, Duraflex hoods are not direct bolt-on parts. They typically require extensive preparation, including sanding, cutting, shaving, and filling gaps. Some areas may need additional fiberglass reinforcement for added durability. Drilling holes for mounting, making custom fitting adjustments, and modifying components like windshield washer nozzles and tubing using a rotary tool are often necessary. Depending on the hood design, not all original parts, such as washer nozzles, may transfer to the new hood, requiring replacements or modifications. Hood Latch Adjustments Duraflex hoods may require adjusting the hood latch for proper alignment and secure closure. This process involves repositioning the latch and making small tweaks to ensure the striker catches correctly. Since fiberglass hoods can have minor variations or warping, additional work such as enlarging mounting holes or using shims might be needed. Hood bump stops may also need adjustment or removal for a proper fit. Hood Accessories: Scoops and Other Modifications Duraflex offers a variety of hood accessories, including scoops, designed to improve both performance and appearance. Installing a scoop usually requires drilling holes in the hood for mounting, using bolts or adhesive depending on the scoop style. When attaching scoops to fiberglass hoods, adding fiberglass reinforcement around the mounting area may be necessary to ensure a secure fit. Accurate measurements and proper fitting are critical to avoid leaks and maintain the hood’s integrity. For best results, Duraflex recommends professional installation by a custom shop experienced with fiberglass components and hood accessories. Traditional auto repair shops may not have the required expertise to handle these types of modifications. Safety and Legal Use Duraflex hoods, hood accessories, and other products are strictly for off-road and show use. Due to Department of Transportation (DOT) regulations, many of these products are not street legal. Duraflex does not recommend or endorse using these products on public roads or highways. Vehicles depicted are highly modified for show which may include molding or adding to the original piece. Parts such as lights, splitters, canards, paint, wings, and others accessories are not included unless specified in the product description. Pictures are meant to show the style of the item(s) in the listing and in some cases may not necessarily show the exact year/make/model of the vehicle listed in the title and description. Will it fit my vehicle? Pay close attention to the make, model and year, but also the trim level. The eBay parts finder may be inaccurate, go by our listing title and description. Verify with us if you are unsure US Customers PayPal is accepted Visa Master Discover also accepted International Customers Please contact us before purchasing Payment types vary Our goal is to earn 5 star rating with every purchase! Tell us how we can make your exerience a 5-star one! All Copyright © Tilbury Enterprises LLC

Price: 794 USD

Location: Fullerton, California

End Time: 2024-11-06T04:31:13.000Z

Shipping Cost: 0 USD