Dominator Mulch Anchor 1 Gallon - Mulch Lock and Pea Gravel Stabilizer Ready to

Description: APPLICATION PROCESS 1.PREPARE: Protect surfaces not intended to be treated. Ensure that walls, mulch borders and other surfaces are protected as needed. Ensure proper surface temperature. Ensure ambient air temperature stays above 40 F until product is dry. If temperature falls below 40 F, performance of the product may be adversely affected. Use the proper equipment. 2.TEST: Perform a small test area (at least 2 sq. ft.) using the product to ensure suitability and the desired results prior to full application. Test for application coverage rate. Use the same preparation, equipment and conditions expected during the entire application. 3.APPLY: Before use, consult our to ensure proper application techniques, including review of the Technical Data Sheet. Do NOT Dilute or alter the product. Shake the container prior to use as some settling may have occurred. Generally, apply one coat of Mulch Anchor to your mulch. When spraying, use even, broad strokes to ensure uniform coverage. If additional hardening of the mulch is required, a second coat may be applied. Due to its larger surface area, pine bark mulch will require 2-3 heavy coats to sufficiently lock down the mulch. In some cases, agitating the mulch after the first coat may aid in the locking process. Apply liberally to the mulch areas. Take necessary precaution not to apply to any surface not intended to be treated. Some settling may occur during application. If this happens, shake to container/sprayer enough to re-suspend the product and resume application. Allow sufficient dry times. Do not apply if rain is forecasted within a day. 4.CLEANUP: Place any unused product back into original container to store for future use. Any mixture exposed to air will harden in the container. Clean equipment thoroughly until free of product residue. FRUSTRATED WITH MAINTAINING MESSY LANDSCAPES? Mulch Anchor reduces erosion and acts as a mulch glue or gravel binder to reduce washout. Perfect for use in landscaping areas, where you want to make it easier to blow leaves and debris off and leave your mulch in place! EASILY APPLY using a sprayer on your outdoor pea gravel and mulch surfaces - see the detailed coverage rates for each surface on our listing to ensure you have the right amount for pine straw mulch, rubber mulch or pea gravel. WORRY FREE LANDSCAPING - Mulch Anchor is water permeable, non-toxic, safe for pet paws, and its strong, water-based formula won't harm your plants. A LONG LASTING, fast acting gravel binder and mulch glue sets in 6 - 24 hours depending on weather conditions, and will last 12-24 months before re-application. Mulch or pea gravel should be dry when applying Mulch Anchor for best results. RECLAIM YOUR TIME & FOCUS ON WHAT TRULY MATTERS TO YOU! Mulch Anchor is a mulch glue ready-to-use spray. Mulch for landscaping is beautiful when it stays put!

Price: 60.96 USD

Location: Dallas, Texas

End Time: 2024-12-17T14:53:45.000Z

Shipping Cost: 0 USD