Description: Descriptions: Dental Curing Light Parameter： Wavelength：440-480nm Light power：5W Intensity：800-1400mw/cm² Battery：Li-on 800mAh Input voltage：AC100-240V, 50/60Hz 0.4A Max Output voltage：DC 5V/1.5A Net Weight：155g Mode selection：P1, P2, P3 Solidification time：1S,3S,5S,10S,15S,20S Features: ·Produce the maximum light intensity safely. · A high intensity of 1400 mW/cm2. · Offers extremely short curing times of no more than 3 seconds. · Cordless, highly portable and light weight (only 155g). · High-performance Li-ion battery technology. · LED panel conveniently indicates a countdown curing time. · Battery can be fully recharged in 90 minutes. · Battery with protection against over-voltage, over-current and short circuit. · 3 versatile curing modes for every indications. · Automatic power off, low battery alert. · Color : White . Operation conditions: 1. Storage Condition: Temperature: +10℃+40℃ 2. Humidity: 30%-75% 3. Atmospheric pressure: 70KPa-106Kpa 4. Environment Conditions: Not near from fire equipment or flammability material. ////////////////////////////////////////////////// INDICATIONS FOR USE: Direct restoration for all class caries. Restoration of teeth defect and veneer. Package: REFILL: Light Cure Composite: 4g/Syringe*5 Syringe Needles : 5pcs/ box*1 Total Etching Adhesive: 5ml/Bottle*1 Etching Gel: 2.5ml/Syringe*1 Applicators Brushes: 20pcs/box*1 Net weight: 188.4g COLOR: A1,A2,A3,A3.5,B1 FEATURES & ADVANTAGES: Unique dispersion technology ensure the filler evenly distributed Radioopaque and fluoride releasing Optimal polishability and high shade stability. Excellent handling, not sticky to instrument; Suitable for most cases of restoration, extensive indication of usage. INSTRUCTIONS： (1)Preparation: isolate and prepare tooth. (2)Cleaning: rinse the preparation with water. (3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time. (4)Applying Dentex Self-Etching Light Cure Adhesive (DSA): dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction). (5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm. (6)Applying Dentex light cure composite (DLC): place selected DLC into cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades.In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds. (7) Finishing: after light cure, adjust restoration. (8) Polishing: use polishing strip or disc to polish the surface WARNING: Do not use this product for patient who is allergy to methylmethacrylate. Do not use this product with any material contained eugenol. PRECAUTIONS: Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of contact, wash skin with soap and water. In severe situation, get medical attention. ATTENTION: To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product. STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. DISPOSAL: After the product is used up, dispose it as normal medical rubbish. SHELF LIFE: 3 years ///////////////////////////////////////////////////////////////////////////////// Description: Orthodontic Adhesive: Designed for bonding of metal and ceramic brackets on enamel. It is of high viscosity and thus prevents bracket drifting and reduces material waste. As it is light cured extra working time is ensured and therefore accurate bracket placement can be obtained. INDICATIONS FOR USE: Direct bonding of metal and ceramic brackets Packing list: Enamel Adhesive Primer(Total-Etching) 5ml*1 bottle; Etching Gel 5ml*1 syringe; Light Cure Adhesive Paste 4g*3 syringe; Little brush 20; Syringe tip:10 STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. /////////////////////////////////////////// No-Mix Bonding Resin orthodontic adhesive Specifications1. This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material.2. As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength.3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories.Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry.Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process;Brushing: apply a thin layer of the primer over the etched enamel with the brusher;Bonding: apply another thin layer of the paste to seal the edges, adjust the bracket within 20 sec, give pressure for 5 to 10 secand remove the excessive primer and paste after 40 to 60 sec; then do orthodontic procedures followed 5-min curing. Packaging Detail: 1*Bottle（10ml）Primer3*Syringes（3.5g each）Paste 1*Syringes(2.5ml)Etchant Gel35*Brushes ////////////////////////////////////////////////////////////// Warning: Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation. Precautions: A void eye and skin contact. Wear gloves when handing this material. Precaution:Please follow manufacturer's directions on the handing, proper use and recommendations for eye protection, when using a curing light This system is designed to be used at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F Light Sensitive Contents: 3 x Adhesive paste Syringes (10.5g) 1 x Primer Bottle (8ml) 40 x Brushes 1 x Instruction Booklet /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// Mini No-Mix Bonding Resin Specifications 1. This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material. 2. As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength. 3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories. Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry. Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process; Brushing: apply a thin layer of the primer over the etched enamel with the brusher; Packaging Detail: 1 x bottle（3ml）Primer 1 x Syringes (3.5g each)Paste 1x Syringes (2.5ml) etchant Gel 20x Brushes 1xSyringe tip STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. ////////////////////////////////////////////////////////////////////////////// Description: Orthodontic Adhesive: Designed for bonding of metal and ceramic brackets on enamel. It is of high viscosity and thus prevents bracket drifting and reduces material waste. As it is light cured extra working time is ensured and therefore accurate bracket placement can be obtained. INDICATIONS FOR USE: Direct bonding of metal and ceramic brackets Feature: This orthodontic adhesive provides a longer working time and a rapid setting time. Can be placed directly into bands. Excess flash is easy to clean up prior to the light curing and the cement is easy to see due to the blue color. It contains fluoride to reduce the chance of declacification. Packing list: 1 x Etchant acid Gel 2.5ml syringe; 1 xLight Cure Adhesive Paste 5g syringe; 1 x Syringe tip Box size: 17*11*2.5cm STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. ////////////////////////////////////////// Visible light curing is a resin adhesive for dentin and enamel 5ml. Describe： This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials. Scope of application： Used for bonding dentine and enamel with resin and ceramic materials. Clinical operation steps: 1. Pretreatment of caries and pulp protection. 2. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. 3. Apply a layer of adhesive evenly on the tooth surface with a small brush. 4. Make the adhesive layer even as far as possible with the wind power of the air gun. 5. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. 6. Please use the composite resin filling material according to the original manufacturer's instructions, as well as the subsequent grinding and reconstruction processes. Precautions： 1. During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. 2. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor "phenolic substances", which will directly affect the degree of polymerization of the adhesive. 3. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. 4. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities. 5. It is not suitable for pulp capping, and patients who are allergic to resin should not use it. Environment： This product is operated at room temperature. Storage Conditions： This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight. Shelf Life： This product is valid for 2 years, please do not use expired product. Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated. 5 Bottles Intotal Statement The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller name:DentalbestCity,State:SHENZHEN,ChinaTelephone number:0755-7214638 Payment We accept PayPal Only! All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it. Paypal is the easiest way to pay for items on eBay. Please make sure your Paypal and eBay accounts have the same physical address used for delivery and the same e-mail address to ensure payment confirmation.Shipping: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Shipping The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal. Return If the item you received is damaged or defective,Please leave message us immidately.We will free exchange or refund.We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges.You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts.Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding! Feedback You feedback is VERY important to us Please leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment. Please leave us with any concerns prior to leave negative feedback, as we can only correct issues when we are aware of them. We understand the concerns and frustrations you might have, and will try our best to resolve the isuues. About Us Serivce is our #1 priority at BAISTRA! If you leave message immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped. We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy at BAISTRA. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right! FDA for Tooth Bonding: 510(K)Number: K232978, Regulation Number: 872.3200, Product Code: KLE FDA for Resin: 510(K)Number: K180463, Regulation Number: 872.3690, Product Code: EBF This product expires on 05/2025 or better.
Price: 9.59 USD
Location: Fullerton, California
End Time: 2024-11-18T20:00:00.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: DENTEX
Product: Etchant
MPN: SZ1400800101
Country/Region of Manufacture: China
Intended Use/Discipline: Dental Laboratory, Dentistry, Endodontics, Orthodontics
Available Variations
Color: Universal Resin
Price: 42.07 USD
Available Quantity: 60
Quantity Sold: 0
Color: No-Mix Bonding Resin
Price: 27.99 USD
Available Quantity: 60
Quantity Sold: 0
Color: Light Cure Resin
Price: 33.59 USD
Available Quantity: 60
Quantity Sold: 0
Color: Mini No-Mix Bonding Resin
Price: 17.59 USD
Available Quantity: 90
Quantity Sold: 0
Color: Blue Glue (Light Cure Resin)
Price: 23.99 USD
Available Quantity: 60
Quantity Sold: 0
Color: 1S Curing Light
Price: 44.79 USD
Available Quantity: 60
Quantity Sold: 0
Color: Bonding Adhesive
Price: 9.59 USD
Available Quantity: 30
Quantity Sold: 0
