Custom Enclosure for Heltec T114 with GPS running ( Meshtastic )

Description: **(Heltec T114) HELV2 T114 Mesh-Pager with GPS**A GPS enabled Meshtastic® case for the Heltec T114 board with GPS module. Install the buttons, board, GPS module, SMA Pigtail and snap the 2 halves of the case together. Secure with a M3 screw for a rock solid enclosure. Build tips:The clear plastic frame for the display must be removed, re-use the screws (do not over tighten!)Clean the print at the screen opening to prevent excess pressure to the display.Clips are pretty strong (and durable) this time around. Apply moderate pressure but make sure you're not pinching any cables. Once everything is working well, secure with a M3 screw which is provided. Take your time and be careful building. Fits:Battery up to 8mm x 31mm x 60mm (803160) 2200mAh Rechargeable Battery)U.FL to SMA Pigtail 10cm longYour choice of SMA antenna up to 12.7mm in diameter at the baseInfo on Heltec H114: Mesh Node T114 is a development board based on nRF52840 and SX1262, supports LoRa communication and Bluetooth 5.0, and provides a variety of power interfaces (5V USB, lithium battery and solar panel), optional 1.14 inch TFT display and GPS module as accessories. Mesh Node T114 has powerful long-distance communication capabilities, scalability, and low power design, which make it excellent in a wide range of application scenarios such as smart cities, agricultural monitoring, logistics tracking, etc. With Heltec nRF52 development environment and libraries , you can use it for LoRa/LoRaWAN development work, as well as to run some open source projects, such as Meshtastic. **DOES NOT INCLUDE HELTEC T114, SMA, ANTENNA OR Battery** *Because 3D printing is an evolving science, there is a possibility for small imperfections. If you do not understand this, Do not purchase. Made right here in the good ol US of A, with love! Thanks for viewing and check out my other listings if you would please! Any questions, feel free to ask! Meshtastic® is a registered trademark of Meshtastic LLC. Meshtastic software components are released under various licenses, see GitHub for details. No warranty is provided - use at your own risk. Just what is Meshtastic? Meshtastic is an Open Source “Off Grid” secure text communication program that uses LoRa Radios and your cell phone to host the Meshtastic texting App. (Your Cellular Signal on your phone is not used).So, for example if you are hiking, camping or biking in areas without Cell Coverage you will be able to keep in touch with your group and know their location. Also great for emergency communications in the event of a natural disaster such as a hurricane, tornado or even a cyber attack. Your phone running the Meshtastic Texting App connects to a Radio via Standard Bluetooth or Bluetooth Low Energy which actually has a great range of up to 300 FT. You can also connect directly to your phone using an OTG cable.(Heltec Modules connected to an Android Phone). The Radio connects to other Radios in the group or “MESH” via LoRa 915MHz. All of the messages in the group are relayed from Radio to Radio so the actual range can be many miles depending on obstructions."On Grid" and want to be "Off Grid" and more secure? Simple -Turn off your Cellular Service and your WiFi - even your Bluetooth if you use the OTG cable.Please note: You will need at least two LoRa Radios to communicate. Thank you for supporting the Meshtastic community!

Price: 21.99 USD

Location: Cumming, Georgia

End Time: 2024-09-26T23:35:51.000Z

Shipping Cost: N/A USD