Custom 22" RC Twin Jet Boat Water Cooled Brushless Motors w/ FPV System, Lipo's

Description: Selling a Custom made 22" RC Twin Jet Boat. This boat was built from a Pro Boat Riverine. I removed the stock electronics and converted to twin brushless motors with water cooled ESC's. The motors also have water cooling coils installed. Water pressure for the cooling was found by tapping into the impeller housing through two plastic ports cast into the housing. You can run a full 3S 12.8V pack wide open throttle through this system and nothing gets hot. Two GensAce Tattu 3S 12.8V 2700mAh Lipo batteries are included. The ESC's, motors, and lipos are setup for redundancy meaning they both feed power to the radio and FPV system. One ESC or lipo can power down everything else stays on, giving you time to get back to shore. The FPV system has a basic Runcam camera and 600mW transmitter that will require a pair of goggles to recieve the signal. The radio system is a Futaba R603FS which works with any 3PM transmitter. Two trims tabs were fabricated for stability and keep the boat on plane at high speed. This boat maintians upright at all times! I have tossed this thing in the water upside-down and it uprights immediately. Both access hatches have sealed covers and this boat has no water leak issues. This boat gets up a boogies, it will handle minor water chop with easy. Great high quality fun when used as an FPV or just as and regular EC boat. Comes with a carry case.

Price: 549.99 USD

Location: Santa Rosa, California

End Time: 2024-10-14T20:11:14.000Z

Shipping Cost: 9.99 USD