Description: Crown XTi 2002 Power Amplifier The Crown XTi 2002 Power Amplifier delivers up to 475W per channel at 8 ohms and is an ideal solution for sound reinforcement, nightclub installation, bands, theaters, DJ applications and much more. The XTi 2002 offers highly accurate sound reproduction with very low distortion, perfect for music or voice playback. It has a switch-mode universal power supply so it can be used anywhere. It handles a wide range of speaker impedances and outputs for a high degree of system compatibility. An array of serious control features are implemented and easily accessed via the included HiQnet Band Manager & System Architect software packages. Crown's Peak Plus Limiters provide the ultimate in system performance and protection. There are 3 user-defined fan modes, adjustable EQ, adjustable crossover filters and much more. Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and releaseEnhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific applicationNew system monitoring provides software visibility of AC line voltage and power supply temperatureIntegrated cast-aluminum handles for easy handling and enhanced durabilityLocking power cord clip provides a secure connection between the amplifier and power cordUpdated HiQnet Band Manager and System Architect control softwareIncreased number of presets to a total of 30; 29 of which are user definable Product Specifications Output Power1000W @ 2 Ohms Stereo (per Channel)800W @ 4 Ohms Stereo (per Channel)475W @ 8 Ohms Stereo (per Channel)2000W @ 4 Ohms Bridged-Mono1600W @ 8 Ohms Bridged-MonoDamping Factor 20Hz to 1kHz > 500Input Sensitivity 1.4VrmsInput Impedance 20k Ohms (Balanced)10 kOhms (Unbalanced)Gain 32.9dB @ 1kHz, 8 Ohm Rated OutputFrequency Response (at 1 watt, 20Hz - 20kHz) +0dB, -1dBSignal-to-Noise Ratio XTi1002/2002/4002: 100dB (A weighted) / XTi6002: 103dB (A weighted)Total Harmonic Distortion (THD)< 0.5%ConnectionsInput Connectors: XLR, one per channelLink/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).HiQnet USB Connector: Type B, connects to HiQnet network.Controls Front Panel Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifierSel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockoutLCD Screen: Backlit liquid crystal display that shows preset and processing statusIndicators Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).-10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clipReady Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortionTemp Indicator: Red LED, one per channel, illuminates under excessive temperature conditionsPower Indicator: Blue LED illuminates when the amplifier has been turned on and has powerCooling Proportional speed fan with front-to-rear airflow.Power Consumption 8.3A; no more than 38W at idlePower Requirements 120 VAC 50/60 HzDimensions 19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm)Weight 18.5 lbs (8.4kg) approximateSpecialties DSP Includes EQ, Crossover Filters, Delay, and Subharmonic SynthesizerProtection for Short Circuits, Overloads, and Overheating Packaging Info Package Weight 23.75 lbBox Dimensions (LxWxH) 22.5 x 18.9 x 7.1"
Price: 799 USD
Location: Jamaica, New York
End Time: 2025-01-12T21:58:46.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Crown
Form Factor: Rack Mountable
Type: Power Amplifier
Number of Channels: 2
Custom Bundle: No
Model: XTI2002
MPN: XTI2002
Year Manufactured: 2002
Country/Region of Manufacture: China
Modified Item: No