Crown Pro Audio XLi2500 1500 Watt 2 Channel DJ/PA Amplifier+Headphones+Cable

Description: Package Includes: (1) Crown Pro Audio XLi2500 1500 Watt 2 Channel DJ/PA Power Amplifier Amp XLI 2500 (1) Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad (1) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper Authorized Crown Dealer! Description of XLI2500: Powerful. Reliable. Affordable. The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference. With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value! Features: Crown Pro Audio XLi2500 1500 Watt 2-Channel DJ/PA Power Amplifier RMS Power @ Dual 4 Ohms: 750 W RMS Power @ Dual 8 Ohms: 500 W RMS Power @ 8 Ohms Bridged: 1500 W Frequency Response: 20 Hz - 20kHz Signal-to-Noise Ratio: > 100 dB Intermodulation Distortion: =/< 0.35% Slew Rate: >10V/us Voltage Gain: 33 dB Damping Factor: 8 Ohms, 10 Hz to 400 Hz THD: < 0.5% Input Sensitivity: 0.775V Input Impedance: 20 kOhms Crosstalk: -82 dB at 1 kHz Line Output Level: 1V into 10 kOhms Phantom Power: 15 VDC AC Line Voltages Available: Universal Power Supply. Line voltage tolerance +15%, -20% IEC Power Connector: 15A Stereo/parallel/bridge-mono mode User selectable input sensitivity - 0.775V and 1.4V Efficient forced-air cooling prevents excessive thermal buildup Electronically balanced RCA & XLR inputs; binding post and Speakon ® outputs Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel Protection against shorts, no-load, on/off thumps and radio-frequency interference Product Dimensions: 19" x 3.5" x 12.4" inches Product Weight: 29.7 Lbs. Includes:DJ1500 headphonesDetachable cableSoft suede and leather ear cushions (interchangeable)Leather hard travel protective caseGold plated ¼” adapter Video of DJ1500: Description: Rockville brings you Pro quality DJ headphones at an incredible price with its new DJ1500. These headphones are tailor made to meet the demanding needs of today’s DJs. The DJ1500 features large over-the-ear swiveling cups with superbly comfortable foam ear pads (interchangeable soft suede or leather finish cushions included) that seal tight around the ear for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering an extended frequency range and incredible bass response. You’ll hear pronounced vocals; rich, deep bass, rich mids, and crisp highs that will make mixing tracks a breeze. We’ve also incorporated exclusive sound isolation technology which helps to greatly reduce background noise. The DJ1500 features a clean modern look with ergonomically designed ear cups that swivel 45° up and can flip around 180°. The headband is made of soft supple leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. Improved rugged swivel joints can withstand the rigors of daily use and provide years of carefree use. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼” adapter to ensure the best possible signal. We also provide a hard leather case to store and protect your new investment when you are on the go. With deep bass response, optimal sound reproduction, and a sleek modern design the DJ1500 will quickly become your first choice whether spinning wax at the club or practicing your mixing techniques at home. Features:Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear PadProfessional DJ Headphones40mm Neodymium driversErgonomically designed large over-the-ear swivel cupsSupreme sound isolationAccurate sound reproductionMinimal bleedSturdy and durable steel headband and armsSoft leather headband coverInterchangeable leather and soft suede ear cups covers includedDetachable 47” coil cable made of 100% Oxygen Free Copper (158” fully extended)Gold plated 3.5mm connectorGold plated ¼” adapterHard leather carrying case Specifications:Style: Closed-BackDesign: CircumauralTransducer Type: DynamicDriver: 40MMSensitivity: 100±3dBImpedance: 32ohmFrequency Response: 8Hz – 22KHzMax. Power: 800MWRating Power: 400MWNet Weight: 290g (with cable) Video of RCXFM20E-B: Description: All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer. The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use. Features: Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable XLR Connectors with Internal Strain Relief for Rugged Reliability 100% Copper Conductors for Enhanced Signal Clarity 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility Length: 20 Ft Color: Black Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 6 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: XLI2500+DJ1500+RCXFM20E-B Home / About Us / Contact Us / Returns / FAQ's Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Price: 580.38 USD

Location: Inwood, New York

End Time: 2025-01-10T14:40:00.000Z

Shipping Cost: 0 USD