Complete aluminum frame conversion kit for 14-17 CRF250R to CR500 engine

Description: This kit contains parts to convert a modern Honda chassis to accept a 1989-2001 CR500R engine.Don't forget your radiator inlet tubes and your bushings.Click here for the radiator tube kit (14-17 CRF250 radiators)Click here for the bushings.The Kit includes the following:-Billet Y-piece-Silencer Mount-Lower engine mounts (2)-Ignition coil mount with plated steel threaded inserts-Head brackets (2)-Headstay Base-Fuel Pump Insert-Fuel Petcock Mount-Lower Pipe Mount-Frame ReinforcerWarning: Installation of this Y-piece may cause some interference between the front tire and the pipe when forks are FULLY compressed. Under most riding conditions this shouldn't be a problem. We have found that Pro Circuit pipes provide better clearance than others.Check clearance before riding. Clearance can be increased by modifying the pipe, using a lower profile tire or other modifications. Buyer assumes all responsibility to ensure safety.Download the Conversion Manuals. These manuals included detailed instructions and photos on how to perform each of the modifications for great looking results.The Y-piece is machined from a solid block of 6061-T6 aluminum, then de-burred in a media tumbler. The front engine mount is machined into the Y-piece such that you will not have to fabricate front engine mounts. The ends are machined to fit inside the tubing of the frame to allow the strongest possible welds. With this Y-piece, you do not have to replace the square tubes that run under the engine. We have many customers who have used this Y-piece for their conversions and we have received no complaints but many of them have commented on how much they like it. As you can see from the images it makes a very clean looking conversion.CR500 engines from 1985 to 1988 can be used but require the swing-arm bolt bushings in the rear of the case to be modified.Legal DisclaimerIn so much as the Property may hereafter be installed by the Buyer or the Buyer’s agent on another motorcycle, which may require significant alterations to the motorcycle, including but not limited to the cutting of the motorcycle’s frame, the Buyer expressly waives any claim for and indemnifies Seller against any future unknown or unexpected injuries, damages, and/or losses resulting from the installation of the Property described above. The Seller recommends that the Property be installed by a bonded professional. The Buyer agrees purchasing and accepting this is a full and final release of any future damages.

Price: 599 USD

Location: Washington, Utah

End Time: 2025-01-04T22:01:35.000Z

Shipping Cost: 19.55 USD