Community CP6-B 6.5" 2-Way Pendant Speaker 60W Black

Description: The Community CP6-B belongs to the Commercial Design series, purposefully crafted to deliver exceptional paging and musical performance. Designed with precision, it is ideally suited for open architectural spaces or locations where an elegant pendant-style speaker is a necessity.Key FeaturesHigh intelligibility with exceptional uniform coverageConsistent, wide dispersion up to 16 kHzTru-Phase high-frequency waveguidePaintable enclosure constructed of high-impact ABS plastic to reduce resonancesExternal loop-through Euroblock connectorsETL listed to comply with UL1480Selectable 8 ohm or 70V/100V operationThe entire Commercial Design Series maintains consistent voicing, ensuring that the CP6-B can be seamlessly integrated with other members of the series, maintaining sonic uniformity across different zones.Community's exclusive Tru-Phase waveguide technology provides a consistently wide conical polar response, extending up to 16 kHz. The genuine coaxial design employs separate magnets for the LF and HF drivers, resulting in reduced distortion and leading-edge sensitivity. This allows for up to 3 dB greater output levels while demanding only half the amplification power compared to competing products.Conveniently located on the loudspeaker's front face, an easy-access selector switch enables the choice of 8 Ohm or 70V/100V operation. Additionally, an integrated rear cover discreetly conceals all wiring and hanging hardware, ensuring a visually pleasing installation.Specifications:• Loudspeaker Type: Two-way, full-range, coaxial pendant mount loudspeaker, 8 Ohm or 70V/100V operation• Operating Range: 70 Hz - 13.5 kHz (-10 dB)• Frequency Response: 100 Hz - 12.5 kHz (-3 dB)• Max Input Ratings (8 Ohm): 60W continuous, 150Wprogram, 21.9 volts RMS, 43.8 volts momentary peak• Transformer Taps: o 70V: 30W, 15W, 7.5W, 3.75W and 8 Ohm selectable o 100V: 30W, 15W, 7.5W, and 8 Ohm selectable• Distortion: o 500 Hz, 10% Full Power: 0.33% 2nd Harmonic, 0.55% 3rd Harmonic o 500 Hz, 1% Full Power: 0.25% 2nd Harmonic, 0.06% 3rd Harmonic o 2 kHz, 10% Full Power: 1.11% 2nd Harmonic, 0.80% 3rd Harmonic o 2 kHz, 1% Full Power: 0.67% 2nd Harmonic, 0.23% 3rd Harmonic o 8 kHz, 10% Full Power: 2.49% 2nd Harmonic, 0.21% 3rd Harmonic o 8 kHz, 1% Full Power: 0.30% 2nd Harmonic, 0.06% 3rdHarmonic• Sensitivity (1W/1m): 91 dB SPL (100 Hz to 12.5kHz 1/3 octave bands); 91 dB SPL (250 Hz to 4 kHz speech range)• Maximum Output: o 8 Ohms: 109 dB SPL / 115 dB SPL (peak) o 70V: 106 dB SPL / 112 dB SPL (peak) o 100V: 106 dB SPL / 112 dB SPL (peak)• Nominal Impedance: 8 Ohms• Minimum Impedance: 7 Ohms @ 10 kHz• Nominal Coverage: 120º conical (1 kHz to 6 kHz+/- 65°); 120° conical (500 Hz to 6 kHz +/- 65°)• Axial Q / DI: 5.04 / 7.03, 500 Hz to 6 kHz• Crossover Frequency: 2 kHz• Recommended Signal Processing: 90 Hz, at 24dB/Oct high pass filter• Drivers: LF 1x 6.5" cone, HF 1x 3/4" exit compression driver• Driver Protection: Self-resetting solid state circuit breaker• Input Connection: Two 2-pole Euroblock connectors• Controls: Front-face wattage / low impedance selector switch• Enclosure: UL 94V-0 rated ABS plastic, matte finish, paintable• Finish: Black• Mounting/Rigging Provisions: Two PHK-15 pendant hang kits (one for main suspension and one as a safety cable), each including15ft (4.5m) long 2mm (0.77") high tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to theloudspeaker bracket and Gripple® brand adjustable height cable fasteners.• Grille: Powder coated steel with safety line,black finish, paintable• Baffle: Reflex loaded UL 94V-0 rated ABS• Safety Features: Included safety cable. Eachcable has an SWL of 99 lbs (45 kg).• Safety Agency Ratings: ETL listed to complywith UL1480 and CSA60065. Suspension system and Gripple® brand cable fastenerlisted per UL1598 and UL2239, TUV and CSA Class 3426-01 and Class 3426-81.• Required Accessories: Electronic high passfilter• Supplied Accessories: Two PHK-15 pendant hangkits, Enclosure ABS plastic rear cover, Rear cover ingress weather plug• Optional Accessories: o PHK-30 30ft (9.1m) pendant hang kit o PHK-50 50ft (15.2m) pendant hang kit o PSC replacement Gripple™ speed clamp o PST-14 trimmable 14ft (4.3m) decorative split loom tubing• Dimensions: o Height: 13.629" (346.2 mm) enclosure o Diameter: 10.0" (254 mm) face• Weight: 8.1 lbs (3.7 kg)

Price: 149.98 USD

Location: Springboro, Ohio

End Time: 2023-12-02T14:20:29.000Z

Shipping Cost: 0 USD