CERAMIC STONE SEALER SEMI-GLOSS FINISH CONCRETE MASONRY STONE PAVER MARBLE PATIO

Description: SUPERMAXXCERAMIC STONE SEALERSEMI-GLOSSPOOLS, DRIVEWAY'S, PATIO’SStone, Marble, Limestone & Paver SealerRecommended application is every 3-4 years for normal residential and light commercial use.Advanced Ceramic/Siloxane Formula100% Satisfaction GuaranteeMade in AmericaSafe & Effective on all Stone, Marble, Granite, and Limestone. Pool and Driveway Pavers. About The ProductSupermaxx Stone Sealer is the strongest stone sealer available and features superior quality for superior results. Supermaxx Stone Sealer is both a hydrophobic and oleophobic Ceramic/Siloxane polymer that densifies and cures to a ceramic-like surface. This high-quality Ceramic/Siloxane sealer penetrates into stone surfaces and repels both water-based and oil-based items. This is important for your stone, marble, and limestone which provides breathability, is durable, long-lasting, and offers superior sealing protection.Additionally, it cures to a diamond-hard ceramic surface that hardens and protects all stone, marble, limestone, and concrete.Supermaxx penetrates deep into your marble, cement, pavers, or other natural or man-made stone, providing the ultimate protection under the surface and on top. It converts into a safe, durable, clear ceramic polymer material that fills the pores of the stone, marble, granite, and limestone which keeps staining materials from entering and damaging the stone. It also blocks unhealthy bacteria, germs, oils, and dirt which are not good for your surfaces, or your health. As an added feature, Supermaxx Ceramic Stone Sealer helps make cleaning quicker and easier with less maintenance. Moreover, it is easier to use than other solvent or water-based sealers allowing virtually anyone to apply a quality application without streaking. Use on all your UN-SEALED Stone SurfacesHealthier for You, Your Family & PetsFaster, Better & Easier CleaningMade in AmericaSEMI-GLOSS FINISHLess MaintenanceCOLOR ENHANCERProfessional GradeCOVERS 600 - 800 SQUARE FEET PER GALLON DEPENDING ON SURFACE CONDITION & APPLICATION PROCEDURE Product Directions: It is highly recommended that before applying a sealer, you do a Deep Cleaning of your marble, granite, travertine, terrazzo, slate, or other natural stone. This gets the oils and dirt out of the pores which keeps them from being sealed in and allows the sealer to penetrate better into all the stone’s pores. Step 1 – Deep CleaningIt is recommended before applying a sealer that you first do a deep cleaning as detailed in the above “Deep Cleaning” sections. After deep cleaning, we recommended that you allow the stone surface to dry for at least 12 hours before proceeding with applying a sealer. Step 2 – Wipe, Brush, Pad, Spray, or Roll On.After your stone surface is completely clean and dry, apply the sealer onto the surface. Apply enough sealer so that the entire surface area is wet. Once entirely wet with sealer, allow drying for at least 6 hours before light traffic. Place furniture items on the surface after 12 hours.COVERAGE - 600 - 800 SQUARE FEET PER GALLON DEPENDING ON SURFACE CONDITION & APPLICATION PROCEDUREQUART SIZE AVAILABLEGALLON SIZE AVAILABLEGLOSS SEMI-GLOSS SATIN NATURAL FINISHES AVAILABLE

Price: 109.95 USD

Location: Delray Beach, Florida

End Time: 2023-12-07T15:47:14.000Z

Shipping Cost: 0 USD