Description: Here is the official product info & specs:The BIDA 100A-30 Two-Way Broadband Indoor Distribution Amplifier by Blonder Tongue features a 49 to 1000 MHz RF bandpass and a flat operating gain of 30dB. This self-contained two-way broadband indoor distribution amplifier with active return path is designed specifically for CATV and SMATV signal distribution systems which use a cable drop as a signal source.The BIDA 100A-30 amplifier is configured for two-way operation with a passive sub-channel return path for 5 to 36 MHz bandpass. The return gain is about 20dB when it is inactive mode. Lower operating gains can be achieved by adjusting the variable attenuator. This model can be attenuated over a range of 10dB in the forward path and 18dB in the return path. Gain and slope controls are located on the front panel for easy set-up and adjustment. Two -30dB back-matched test points are provided to allow testing without service interruption.In applications where input signals are too high or where greater cable equalization is necessary,this BIDA active return path amplifier can be reconfigured by using optional plug-in fixed attenuators (forward and return) and cable slope equalizers(forward) to meet particular requirements. Push-pull hybrid IC modules enable the amplifier to operate at high output levels while retaining low distortion characteristics.The aluminum chassis is designed to provide excellent heat dissipation thus allowing operation at high ambient temperatures with no degradation of performance.The unit features a 36/49 MHz split for passive return path operation. It can be re-configured to active return path operation by re-positioning 3 internal jumpers. An optional BIDA-FA plug-in fixed attenuator (not included) can be used for reducing forward and/or return gain from 1 to 20dB in 1dB steps. The amplifier is powered by means of an external 26 VAC transformer (included), which also enables it to be remotely powered via low voltage AC wiring. Provides two-way capability with an active or passive return path set by field-changeable jumpers Hybrid IC circuitry for high output with low distortion Front panel gain and slope controls for easy adjustments Sockets for hybrid IC to make a hybrid IC change in the field Forward path input-side plug-in fixed attenuator and cable equalizer (not included) Return path output-side fixed attenuator Externally accessible test points permit in-service testing Exceeds FCC specs for both conducted and radiated interference at full output level External UL listed power transformer Input and output test ports Large heat sinks for efficient heat dissipation Notes & Details:• Buyer is to pay shipping charges. • Sales within the continental United States only,no international sales!• All items will be carefully packed and sent either via UPS or USPS, only to verified address in the lower 48 states. • I am not responsible for any unknown defects or problems; all sales are on an as-is basis,however this item is warranted not to be DOA (dead on arrival), unless clearly stated otherwise above. • If the item does not work as described above, the purchaser has 72 hours from the receipt of this item to notify me. Otherwise, all sales are final. • Please email any questions you might have before bidding. • If it is not included in the description, it is not included in this auction. • I reserve the right to reject purchases based on negative feedback or lack of feedback. Please feel free to email me with any questions and/or to request additional pictures. Bid with confidence. I have been in business in Los Angeles for over 30 years. I am committed to integrity and to complete satisfaction!
Price: 80 USD
Location: Los Angeles, California
End Time: 2023-12-28T22:16:43.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Model: BIDA-100A-30
MPN: BIDA-100A-30
Brand: Blonder Tongue
